Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

1080ti

  1. Zaithe

    MP 1,1-5,1 Displayports not working on 1080TI with Mac Pro 5,1

    I have a non EFI flashed 1080TI(11G-P4-6798-KR) using the SATA ports for power (2x 6in SATA Power to 1x 8 Pin PCI Express Video Card Power Cable Adapter) alongside the default gpu power cable i believe to prevent the unexpected shutdown crash (still happens on high load). I was having an issue...
  2. M

    NEED HELP with NVIDIA 1080 Titan X (Maxwell) on MAC PRO 5,1

    I have had a MacBook Pro's for a while but have since decided to set up a MAC PRO 5,1. I bought a Nvidia GTX 1080 Titan to increase the GPU but I cannot figure out how to get started. I have looked into flashing the BIOS yet can't pin point where to start. If anyone could send me a link to...
  3. EddieK420

    Classic Mac Pro 4,1 -> 5,1 driving Ultrafine 5K full resolution.

    I was able to get my classic Mac Pro to drive the LG Ultrafine 5K at full 5K resolution retina mode enabled. I used an Gigabyte Alpine Ridge Thunderbolt 3 card inside my Mac Pro. 2 DP cables go from my Nvidia GTX 1080Ti to the Alpine Ridge then the Thunderbolt 3 cable goes from the Alpine Ridge...
  4. scarrab666

    Resolved 1080Ti and Mac Pro 2012

    Does anyone have advice on installing a 1080Ti on a Mac Pro 2012, or a easy to follow guide... I'm happy enough to by adapters and what not (which I think is what you need for the extra power) but less confident with soldering and complex CLI fixes to get the damn think working with it... I'd...
  5. DestroyF

    New GPU king for the Mac Pro

    I am searching for my GPU upgrade and find out the new RTX2080 has a maximum power consumption about 225W, which means this should be the most powerful GPU for the Mac Pro's within the power safety limit at this moment 2018 October. Although there's no Webdriver yet available. This is a card...
  6. shutterangle

    ePSU for 1080ti

    Hi there, newbie here. I joined to post this thread. I've read through tons of threads here and learned a lot, and I've managed to get a 1080ti running in my 2009 MP 4,1 flashed to 5,1 with power from the built in connectors + a SATA port. It's working great! However, when it goes under VERY...
  7. S

    Powering 1080ti in 2010 5.1 Mac Pro?

    Hi, I've searched and found answers to similar queries to mine, but 'similar' hasn't helped me so apologies for any repetition. I've bought an Nvidia GTX 108ti for use in a Mid 2010 5,1 Mac Pro. The card has/requires 1x 8-pin and 1x 6-pin. The only cables I have immediately present and which...
  8. K

    cMP 5,1 1080Ti Power Issues

    Hi guy's/gal's! I've got a major problem whenever my 1080Ti FE (flashed for boot screen) hits heavy load and the whole mac just shut's off! This has only started happening recently but I haven't had the card long and I have set it up the way that I was told to when I bought it. with the 2 mini...
  9. D

    Mac Pro 5,1 No Display / EVGA 1080Ti Not Recognised

    Having huge issues trying to get any display out of my 1080Ti on a Mac Pro 5,1 (Mid 2010): I recently upgraded my Mac Pro 5,1 (Mid 2010) from Sierra 10.12.6 to High Sierra 10.13.1 through the app store Installed the ATI card that came with the Mac Pro, used that to install the update + High...
  10. Will.henri

    Big project for cMP - Need advice before buying

    Hello everyone ! I know my last post was about a year ago but I keep reading a lot (this forum give me headache, too much stuff I dont know). A lot of thing happen since then and I'm ready to give a second life to my studio's computer. I try to avoid switching all my system to PC and I would...
  11. L

    PCIe card -> 6pin 75W

    Good morning all, Like a few others here I didn't check the power requirements before buying the 1080Ti for my Mac Pro 5,1, and have been scrambling to find a solution for powering it which doesn't involve a secondary PSU or overtaxing the 2x6pins. I still have 1 PCIe slot available, and it...