Hi all — I’ve searched, but haven’t quite found my exact situation. Apologies if this has come up before.
I’ve got a mid-2012 Mac Pro 5,1 (dual 3.46 GHz Xeons, 96 GB RAM) with an RX 580 GPU.
I’ve been running Mojave very successfully for a couple of years — triple-monitor setup, plus a PCIe...
Hi everyone :)
I installed Catalia on a late 2012 Mac mini to try it out. Unfortunately, Apple also installed new EFI firmware without asking during the installation. Since I prefer Mojave, I switched back to it, even without APFS.
Now I get an annoying warning every time that the hard drive...
This followed an aborted Linux Mint install which seems to have wrecked the boot management; using Option at Startup allows for installing from a flash drive and Recovery also shows up; the disk with two OS's on it show as Format unknown on the partition pictograph in Disk utility. Have tried...
cMP 5,1 with unflashed GPU
I used a native Mojave OS volume which booted on the cMP 5,1 to build and install OCLP 2.2.0 to prepare a new separate volume installing Sonoma OS. The native Mojave OS volume booted normally without the OCLP boot picker (OpenCore Picker) and I was able to use the...
I need some help using a CH341A programmer and SOP8 clip on my late 2013 15" MBP. End goal is to read and save the ROM, and modify the Big Sur firmware so that I can undervolt again (get rid of "OC_Locked" in VoltageShift). Someone has detailed this at the GitHub page here.
I installed Xcode...
Hi GNU Linux bootloader friends.
I need to have a Windows 11 or 10 USB Installer in a Flashdrive to be on the ready to fix any Windows installation on any computer (Mac or PC) and any EFI (old Macs use EFI) or UEFI (relatively new PCs and new Macs use UEFI).
I burn the Windows .iso using Rufus...
Hi, if anyone has successfully booted the Windows 10 or 11 USB installer on EFI Macs (I wish it was UEFI, this would have been solved months ago) how did you do it? Did you inject it with a bootloader from Linux?
I have to reinstall the Windows (Boot Camp), preferably just an overwrite of...
I'll be brief. I want to understand why in the iMac 27 2013 you can install Windows in legacy mode, windows 7 and windows 10, and both systems perfectly see nvme disks and make it possible to install the system and boot from the nvme itself. While Mac Pro 4.1 5.1, when installing the system in...
Hello Mac friends. When Boot Camp was booting, after a highly recommended app WinRE (it's the best after trying many apps and technical command line things for many grueling days to almost two weeks coz' to reinstall and redownload wasn't an option) made it bootable again (it did convert the GPT...
Hi, I messed up the EFI of my Boot Camp Windows 11 by renaming the Microsoft folder in there coz' of experimentation (it's on my 2nd internal hard disk on the Mac, actual Mac, not Hackintosh) but I do have a Windows to Go that I can boot to. I've repaired the bootloader EFI I believe but it...
Hello I recently uninstalled something in the EFI (in this EFI folder I erased folders named EFI, System and boot.efi in the secondary macOS volume (my setup, in one drive is a quadruple boot at that time, which included Boot Camp. I had the EFI mounted with an app). I deleted that volume, that...
Hi everyone. I'll describe my setup and what I have already tried first.
I have installed Big Sur on MacBookPro6,2 (15'' mid-2010) via OCLP. Then I decided to install Windows 10 in (U)EFI mode. Officially my mbp supports only 8.1 via non-UEFI (legacy) mode.
Currently Windows works fine, both...
Hey all,
I am stuck on getting a Ubuntu 22.04 to put the bootloader on the external drive and NOT the drive with the macOS boot loader.
I am able to successfully install linux to an external drive, and it runs. However, even though I tell the installer to put the boot loader on the external...
Hello everyone. Sorry for the translator.
I have an iMac 2011 27" i7 and I needed to replace the video card in it. I purchased an HD 5750, it worked without any problems, but then the firmware update came and now the screen is black when turned on, but the iMac loads and works 100%.
I understand...
Hello,
I'm trying to figure out how to update EFI firmware (BootROM, iBridge) of my T2 Intel Mac without updating macOS. This cannot be done using regular Terminal methods (efiupdater and eficheck Terminal tools do not support T2-equipped Intel Macs). According to this article firmware on all...
Hello,
Is there some way to update EFI firmware (BootROM & iBridge) without updating macOS Big Sur or macOS Monterey on an Intel Mac with T2 chip? Mac is capable of running macOS Catalina.
I have already tried installing FirmwareUpdate.pkg using a well-known method by Pepijn Bruienne. That PKG...
I've extracted the firmware files from the Sierra installer. An older guide (https://forums.macrumors.com/threads/guide-how-to-get-back-old-efi-after-downgrade-from-yosemite.1803934/) said to flash the .scap files using the bless command. The only problem? Any iMac newer than 15,1 only has a .fd...
Hi everyone,
First post!
I have a Macbook Pro 2011 17" with a permanently disabled AMD dGPU (modified EFI through Linux and also removed resistor R8911 to cut voltage to the dGPU). Currently running Sierra as an easy option to retain the control of brightness with the least effort.
I know my...
My Macbook Pro (2012, latest Mojave) started having some hickups not long ago where the screen would freeze for a minute or two and then go back to normal. Then one time it just got really slow and froze up every 10 seconds so I tried to shut it down but it would only shut down to a black screen...
Hello!
I recently bought an old Mac Pro 1,1 I managed to get it working with a Windows copy. However when messing around with the hard drive portions I somehow made it worse.
Long story short I got a clean hard drive with no operating system and have no idea how to get in to “bios”/ Efi to...