mac pro 2010

Hello, i recently bought a new graphics card, an RX 5500 xt for my 2010 mac pro. as i installed it worked great in windows, but i accidentally kicked the power cord, as soon as i restarted the computer the card wouldn’t display anything unles i installed the stock radeon hd 5870. The thing is...

I just got a "new to me" dual cpu 5,1 mac pro tray. Upon inspection it looks like on one side it's been sprayed with silicone or some type of lubricant. It was stated that it was in working condition prior to purchase and of course none of this was visible or evident prior to sale. It's only on...

Out on a limb here, any one who has the Mac Pro 2010/2012 logic board schematics?

Hello people! I've been scouting eBay for a replacement Mac Pro 5,1 2010/2012 Logic Board and there's quite a number of different part numbers. I remember seeing a webpage listing the known Logic Board numbers for the Mac Pro 5,1. Does anyone recall/know the url to this webpage?

I have a mac 5.1 with 4 SSD's in it, 2 are for my mac and 2 are empty i want to use them for windows. I want to install windows via USB, made it bootable multiple times on different usb's and every time it goes trough after changing some settings in windows CMD (Shift-F10) & i have tried a...

Hello everyone, I need some advice on how to make a Titan Xp work on a Mac Pro. After installing and using pixlas mod to power the graphics, it all seemed to work. Cuda and latest NVIDIA drivers are installed and seems to be recognised. However, the Titan doesn't seems to be working, as I...

Hi Guys, I'd like to know which difference between Mac pro 5,1 2010 and Mac Pro 5,1 2012 I Will make a project with Mac 5,1 12 Core But if i buy the mac pro 2010 i will pay less than 2012. Someone know if have so much diference? if have which would be? My project is: Buy a Mac pro 5,1...

Hey folks, I'm gonna try to cover this as quick as possible as it could be a question which is asked often. I've just purchased the most recent Macbook Pro, which is running the latest OS and is running it smooooth. At home I also have a Mac Pro (Mid 2010 tower), which cannot update past High...

First off please accept my apologies as I can see from the many many threads I've read about this that it's definitely been discussed before but I'm so completely lost with all of this now that I thought I should ask in a new thread. I have a Mac Pro 5,1 (Mid 2010) which I bought when they...

Hi, I’m thinking of picking up a spare Mac Pro 5,1 to have on hand for parts in case anything goes south with my current single-processor 5,1. My current Mac Pro is a true 2010 Mac Pro 5,1 so I would like the spare to be the same, for maximum compatibility. However, it can be tricky to spot an...

this is my own experience to solve the non start up problem to a Mac Pro 2010, I write down almost all possibilities which the problem could come from, and the solutions: here I've reveiced a Mac Pro 2010 mono processeur 2,4 quad original, it did not start up at first power on, commun after...

Hi, I've just installed 2x16GB RDIMM modules in slot 1 and 5, while the rest of the slot are filled with 8GB. Currently running Mojave now, and all RAM are detected properly, as shown below: I wonder if the slot location 1 and 5 are proper for the 16GB module, because the 'memory slot...

get Northbridge temp down to 120 F ( 49c ) direct the airflow over the Northbridge Heatsink

I replaced my mac's gtx 680 with rx 580, and installation went well. Before installing I cleaned all the fans with compressed air and when this ran out, I used a toothbrush to move dust and eventually carefully vacuumed it or took it out by paper. It might have been slightly moist, but I don't...

Just throwing a post in here in case people don't find their way to the Mac Pro forum. First off, I got my Mac Pro prepped per @tsialex 's fine instructions, found here. Firmware: Got my firmware updated. Read the thread above and follow directions exactly. Graphics: Removed incompatible...

Hi guys, Want to share my experience installing W10 in my cMP 2010 5,1 without bootcamp. TL;DR: - use W10 1607 ISO. - do not use USB as there is bootROM corruption issue - W10 is installed into different storage than the MacOS - use excellent guide by h9826790 (I skip the BootCamp 5...

(Mid 2010) Mac Pro Problems Recently my dad’s Mac Pro (mid 2010) started having an issue where it couldn’t turn on at all so we tried fixing this computer as it is a really reliable and strong machine which has never failed him before. *NOTE: We are doing this ourselves as the computer is...

I am not an engineer, nor programmer but a possible scenario for Mac Pro GPU support in 10.14 could be a PCI/Passthrough solution of MAC-EFI/GraphicsCard to second GPU/Metal/supportedDevice port output (without Mac Efi), maybe AMD Vega only which are officially supported in eGPU configurations...

Hey, is there a way to install Windows 7 on an 2k10 MBpro with the gfx Problems? Becouse u cant deactivate the Nvidia Card when ur installing? Thanks for helping

Hello all, My system is composed of a mid-2010 MacPro with 32GB of RAM + ATI Radeon 5770 + DELL 2713H monitor connected through one of the Mini Display Port outputs. I have been using this system without a problem for more than 4 years, with different internal SSDs for OSX 10.6.8, 10.8.5 and...