Hello everyone, i bought myself a Mac Pro 4.1 and i put in some x5690 cpus which work fine, but when i installed the Sapphire RX580 no boot screen and nothing loaded, no video signal, it does boot on Windows but not on MacOS, it gives me the beep, and than it just stays there, when i press the...
Hello, i was thinking to upgrade my macos to catalina with opencore as i have purchased a new 5500xt for gaming in windows. Iam curently running a 5,1 macpro with the stock hd5870 for bootscren and the 5500xt. Till now i have been on high sierra 1.13 but the 5500xt isnt suported until 1.15...
Hi everyone! Please help to find a solution. I have Palit 1080 ti 11 Gb, connected through PIXLAS mode in my Mac Pro 5.1. When I'm trying to play the games, i have a message in MSI Afterburner "LIM Voltage/Power Voltage" sometimes it's disappear, and strange sound from video card (like piiiiii...
Hi
I have Mac Pro 4.1 Flashed to 5.1 and Installed with OCLP 5.1 with Monterey.
After installation completed and I have root patch and build and install open core, everything seems fine until my WiFi cannot connect to the network. I can see the list of my network but somehow when I click on of...
Hi,
I plan on using my 5.1-flashed MP4.1 with a single X5690, MVC flashed GTX 970, 32GB RAM,
for developing iOS apps in xCode. Now I believe I have to use xCode 15, which requires MacOS Ventura.
I am guessing that upgrading all the way to Ventura is impossible, and even if it isn't, I think...
Hi there,
I have a Mac Pro 4.1, flashed to a 5.1, running Windows 10 only through Bootcamp.
I am currently using a MVC Flashed MSI GTX 970, with boot screen and I upgraded my other PC's GPU today, and I have a leftover RTX 3070 that I plan on using for a new build later this year.
Now I'm...
Hi Everyone! Please help me to solve it.
2xXeon 5690
64gb 1333 RAM
RX580 8Gb
240 Gb SSD GoodRam connected through diskrom (Windows 11 installed here)
1Tb M2 KINGSTON SNV2S1000G installed through adapter Frime PCI-E x4 to M.2 (B & M Key) NGFF (ECF-PCIEtoSSD001.LP)
Im searching my solve almost...
Hello, i have an 2009 Mac Pro flashed to 5.1 running High Sierra. I want to buy a AMD Radeon RX580. Macvidcards it’s to expensive for me, so I want to know if I can flash it by myself to have a bootscreen. I want to have a dual boot macOS/Windows.
I've BigSur on an ssd on a pcie slot, and Monterey newly installed in another, I've installed Monterey after turning ON the VMM flag and SMBIOS spoofing OFF, but when it finished, and reset the two tweaks to default to get full acceleration as recommended by Marin Lo, Monterey can't boot, it...
Hey gang, I recently acquired a 2012 5,1 that came with no drives and RAM. Got it home and tried to get it booted using the HD5770 connected to my LG 35" Ultrawide via the mini DP on the card to the DP on the display. No output whatsoever. Basically no signal detected by the display as it...
I've done a fair amount of searching and can't seem to find an answer to this question. Is it possible to run an AMD 7000 series GPU in a 5,1 under Windows? I know the 6000 series can run with the Syncretic firmware patch, but the 7000 is lower power and actually cheaper to buy than the 6000...
Hi,
I am new to the forum hopefuly some gentle soul can help me =)
I decided to upgrade my mac pro 5.1 from monterey to ventura through open core patcher but since my gtx 970 has no metal capabilities i decided to buy an amd rx 560 which is polaris 21 architectural. I need metal because logic...
I have a 2010 Mac Pro 2010 5,1
For the last 2 months it has been experiencing random restarts, always late at night when no one's around and the only way for me to tell it has in fact restarted is that a 8TB drive that I use for Time Machine has not loaded
This drive has never loaded on a...
2 red lights on the cpu board have come on, i don't remember when.
what do they mean
Mac Pro 2012 5.1 2 - 6 core 3.46Ghz / bootRom 144
installing Monterey as the time and date of this post
Please advise
Hi!
I have a MacPro 5.1, macOS Mojave, 96GB RAM, Kyrom.2 aquacomputer with Samsung 970 EVO SSD, Allegro Pro USB3.2 PCI Card and NVIDIA Quadro K5000 for Mac.
I work with music production in Logic Pro and use tons of plugins (Waves, Izotope, Fabfilter, Native Instruments, IK Multimedia and...
I’m trying to get Windows 11 installed on my cMP running Monterey with Martin Lo’s OC and I’m stuck with an error saying ”Windows 11 installer couldn’t create a new partition or locate an existing one” when I’m choosing the drive to install to. I’ve tried formatting the drive but it won’t fix...
Hi everyone,
I have upgraded Mac Pro 5.1 with a working Fenvi T919 wifi-bluetooth card in the PCIe slot and I've recently received this mini PCIe to PCIe card https://www.aliexpress.com/item/4000809732039.html
I tried installing this card in miniPCIe (wifi) slot on mac pro motherboard and...
Hello! I need help please. I am trying to install Monterey via Open Core Legacy on a Mac Pro 5.1 (high sierra) and the instalation never finishes. The computer keeps restarting after the progress bar finish and goes back to the disk selection (pictures attached) and go again to a progress bar...
I'm experiencing slow performance and wondering if my RAM configuration is slowing my Mac Pro mid 2012 5.1, 3.2 GHz Quad-Core Xeon. Running Big Sur 11.7.1 with Opencore. I have 48 GB 1066 DDR3 ram, 2 x 16; 2 x 8 set up. Here's a pic of the config. How should I configure for max performance...
I just recently bought a Mac Pro 5,1 that was used, and I am attempting to reinstall mac OS on it as the hard drive was 100% wipes, no partitions or anything, I know that it works as I get display out and before I bought it, I got it to boot to a Linux flash drive so the USB ports work and I've...