Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

mikbrad

macrumors newbie
Original poster
May 3, 2017
1
0
Hi all! First time posting in here and bit of a noob when it comes to these sort of things. Please disregard or redirect this if there is already a thread on this subject.

I am looking at upgrading my 27" imac mid 2011. Current specs are:

3.4 GHz Intel Core i7
16GB Ram
AMD Radeon HD 6970M
1TB HD

Ideally, I'd like to swap my current HD with an SSD while replacing my optical drive with either another SSD or a 7200 RPM HD. Additionally, I'd like to run 32GB of ram but I've heard mixed reviews about if this model can support more than 16GB. I know Apple officially says it doesn't on their website but I've heard of people doing it.

Anyone's feedback is sure to be helpful! Thanks a bunch and I'm looking forward to being apart of the community.
 
It supports 32GB RAM. Apple just has a lower official limit for some weird reason, it is quite common for all their models.

These days an SSD is a no brainer. You can get a dual-drive kit from OWC so you can retain your old drive at the same time. Be sure to move your system install to the SSD.
 
On the back of motherboard is a sata connection for extra hdd/ssd but need to be sure of what doing as not easy ifixit have guide for doing it and parts needed.
 
It supports 32GB RAM. Apple just has a lower official limit for some weird reason, it is quite common for all their models.

There's no "weird reason", when this machine was released and the spec sheet written, there were no 8 gb DIMMs. Thus, the limit was 16 gb. Apple almost never goes back and re-writes specs for a machine, especially one they're not selling any more.
 
Keep in mind that since your SATA controller is SATA II (6 gbit/sec) there's no real point in spending extra money for the fastest possible SSD. Almost any modern SSD should work just fine. You can put a 1 Tb SSD in there for $275 or maybe a little less.
 
Keep in mind that since your SATA controller is SATA II (6 gbit/sec) there's no real point in spending extra money for the fastest possible SSD. Almost any modern SSD should work just fine. You can put a 1 Tb SSD in there for $275 or maybe a little less.

It's SATA III. But the 6 gbit/sec is correct.
 
I have a very similar 2011 iMac. I bumped the memory up to 20 GB early on, which appears to be working fine. Last year I replaced the 1TB spinner with a 256GB SSD and a 3TB spinner. I had OWC do the HD upgrade work, which took only about a week from shipping it off to getting it back. I partitioned the 3TB spinner into 3 1-TB drives to give me an internal data drive, an internal recovery drive (which I back up to every night), and a 1TB test-OS drive. Love it.
 
Well, I'm one of the belt-and-suspenders types. I also have a nightly backup of my home directory to my server (also backed up), and two external full-system bootable clones (one in my safe deposit box). I've worked with computers since the 1960s and am a firm believer that you cannot have too many backups.

The one on the internal partition is also for testing stuff using my current OS.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.