I need help from you guys. Here's the situation:
Before I start, let me note that I've been working with iPhones from day one and I have gone over all the basics (and the not-so-basics), so it's not the simple stuff that's the problem here.
I have a 2G iPhone with a strange behavior that it will only accept 2.1 firmware (stock or custom). Any other version gives an error (ie. 1604, 20, 21) both from DFU and from restore mode.
I do have a custom ipsw for 2.1 which would unlock the phone for me, but the problem is that the phone is already unlocked, and when BootNeuter runs, it sees that the settings already match and it reboots. This is not good for me because I DO want BN to do something. The reason behind that is that once the phone reboots, it freezes after about 5 seconds. What I would like to try is have BN run again only this time make at least one change to the settings so that the settings do not match the BB and therefore it is re-written.
I have attempted making my own such such ipsw, but for some reason the phone keeps rebooting after being restored with it (I get the apple logo and a reboot after 30 sec or so). I have tried formatting my mac to 10.5.2 (which came with it originially, it's a MBA from the first gen, so the DFU issue of 10.5..5/10.5.6 is not an issue). I do not know why my ipsw's give me the continuous reboot, but hopefully someone else can create one for me which won't do that.
The current BN settings are
BL 3.9
neuter on
fakeblank off
unlock on
(same as here: http://wikee.iphwn.org/_media/sgold_bootrom:bn20.png? )
I would like to request someone to create a custom ipsw of the 2.1 2G firmware with the following settings:
BL 4.6
neuter on
fakeblank on
unlock off
This, so that BN is forced to reflash the BL and the BB.
Please someone upload to Rapids*are a custom ipsw for me and post the link here. Please also do not use custom logo's (although it's really not an issue).
Your help and attention is greatly appreciated, have a good weekend for now
Before I start, let me note that I've been working with iPhones from day one and I have gone over all the basics (and the not-so-basics), so it's not the simple stuff that's the problem here.
I have a 2G iPhone with a strange behavior that it will only accept 2.1 firmware (stock or custom). Any other version gives an error (ie. 1604, 20, 21) both from DFU and from restore mode.
I do have a custom ipsw for 2.1 which would unlock the phone for me, but the problem is that the phone is already unlocked, and when BootNeuter runs, it sees that the settings already match and it reboots. This is not good for me because I DO want BN to do something. The reason behind that is that once the phone reboots, it freezes after about 5 seconds. What I would like to try is have BN run again only this time make at least one change to the settings so that the settings do not match the BB and therefore it is re-written.
I have attempted making my own such such ipsw, but for some reason the phone keeps rebooting after being restored with it (I get the apple logo and a reboot after 30 sec or so). I have tried formatting my mac to 10.5.2 (which came with it originially, it's a MBA from the first gen, so the DFU issue of 10.5..5/10.5.6 is not an issue). I do not know why my ipsw's give me the continuous reboot, but hopefully someone else can create one for me which won't do that.
The current BN settings are
BL 3.9
neuter on
fakeblank off
unlock on
(same as here: http://wikee.iphwn.org/_media/sgold_bootrom:bn20.png? )
I would like to request someone to create a custom ipsw of the 2.1 2G firmware with the following settings:
BL 4.6
neuter on
fakeblank on
unlock off
This, so that BN is forced to reflash the BL and the BB.
Please someone upload to Rapids*are a custom ipsw for me and post the link here. Please also do not use custom logo's (although it's really not an issue).
Your help and attention is greatly appreciated, have a good weekend for now
