I am getting an Apple Watch 4 that is 44mm. I will need a good nightstand holder that will accept the charger. Any good reasonably priced holders available for the 44mm charger?
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Apple watch 4 44mm nightstand holder needed
- Thread starter Professorbob
- Start date
- Sort by reaction score
I use this one from Spigen with my 42 and it works with the 44 so says Spigen's website and others on the forum. I have a 44 coming within the next couple of days and can report back once it's been on the charger. They offer a couple of other variations as well which generally seem to be well received. From what I've found, Amazon has the best pricing on them vs. going direct. I will say this however, regarding phone cases. Sometimes when a new phone is released and the dimensions of the phone change, Spigen will always have the case that genuinely matches the specific phone model sooner.
https://www.amazon.com/Spigen-Apple...7236&sr=8-3&keywords=spigen+apple+watch+stand
Edit: I received the AW 4 today and it works just fine with my charger. At first it did not but what I discovered was the charging puck was not properly seated inside the cutout of the charger. Once I discovered and corrected that, it works perfectly.
https://www.amazon.com/Spigen-Apple...7236&sr=8-3&keywords=spigen+apple+watch+stand
Edit: I received the AW 4 today and it works just fine with my charger. At first it did not but what I discovered was the charging puck was not properly seated inside the cutout of the charger. Once I discovered and corrected that, it works perfectly.
Last edited:
If you have an access to a 3D printer there are about bajillion designs up on Thingiverse.
I actually need to print one later today as I just switched to a 3rd party sport loop (from the Nike band) and like it, and it is a bit awkward to charge a looped watch without some sort of stand.
I actually need to print one later today as I just switched to a 3rd party sport loop (from the Nike band) and like it, and it is a bit awkward to charge a looped watch without some sort of stand.
I have the Orzly & Elevation Labs stands. They were both about $9.
Orzly has a wider, sturdier base. I expected the logo to stand out but on my black one, you can't see it.
EL is more compact.
I think they both have sticky undersides to stick to your bedside table or whatever.
Orzly has a wider, sturdier base. I expected the logo to stand out but on my black one, you can't see it.
EL is more compact.
I think they both have sticky undersides to stick to your bedside table or whatever.
Love the Orzly and the Elago "Mac Classic" stands... both work very well and are priced under $10.
On further thought, with my 44mm S4:
I think for daily home use, the Orzly would be better than Elevation Lab. Sturdier base, and the lip underneath supports the watch so it doesn't go lopsided. Just looks a bit better.
Maybe EL for travel since it's smaller. It works just fine too.
I think for daily home use, the Orzly would be better than Elevation Lab. Sturdier base, and the lip underneath supports the watch so it doesn't go lopsided. Just looks a bit better.
Maybe EL for travel since it's smaller. It works just fine too.
I've been using the Spigen stand with my previous Watch 3 and now I continue using it with my new series 4 watch with no problems. Simple and efective
Here's a comparison with Elevation Lab (blue) on the right & Orzly (black) on the left. Both are about $9 on Amazon.
I think for daily home use, the Orzly would be better than Elevation Lab. Sturdier base, and the lip underneath supports the watch so it doesn't go lopsided. Just looks a bit better.
Otherwise, they're pretty much the same.
I think for daily home use, the Orzly would be better than Elevation Lab. Sturdier base, and the lip underneath supports the watch so it doesn't go lopsided. Just looks a bit better.
Otherwise, they're pretty much the same.
Last edited:
I got one of these as a hoot, but it’s well made, won’t scratch, and the charger fits well.
https://www.amazon.com/dp/B01MYNE2B...b300-9d219b154e01&ie=UTF8&qid=1541028454&sr=1
https://www.amazon.com/dp/B01MYNE2B...b300-9d219b154e01&ie=UTF8&qid=1541028454&sr=1
i have the elevation lab one but i think i paid something like $30 when it first came out. what a ripoff!
I have this too. It fits the Series 3 perfectly. The Series 4, not so much. It will charge it just fine, but now the display is hidden a bit since the watch has grown larger.