ATV3 no signal when i select 1080p

[Che Castro]

When i have it in auto the tv goes dark and says no signal

1080p same thing the tv says no signal

When i select the tv resolution in the atv to 720p everything works


It goes dark in & out invalid format & no signal the screen says when i set it to 1080p

My tv is 1080p & im using an amazon basics hdmi cable

 

[Che Castro]

Im gonna try changing the hdmi cable

And im also using an hdmi switch but everything else works good in 1080p, the ps3,WD TV

 

[rocknblogger]

I'm about to hook mine up I'll report back.

 

[Che Castro]

Changing the cable did not help, im also getting a green screen

 

[chenks]

Changing the cable did not help, im also getting a green screen

try connecting direct to the TV rather than via the switch.
HDMI switches are often the cause of problems like you have.

 

[marzer]

Just for troubleshooting purposes, have you tried hooking the ATV directly to the TV? Instead of passing thru the HDMI switch?

 

[Che Castro]

Ok i connected the ATV3 straight to the tv without the HDMI switch & everything works

So the culprit is the switch

Luckily i have another HDMI switch laying around here that i can try

My harmony remote does not change inputs in my tv so i need the switch
This switch was both optical/HDMI combo

 

[chenks]

My harmony remote does not change inputs in my tv so i need the switch
This switch was both optical/HDMI combo

the harmony remotes can easily change TV inputs, so what is the reason that yours doesn't?

 

[Che Castro]

the harmony remotes can easily change TV inputs, so what is the reason that yours doesn't?

I dont know i have a Mitsubishi 60c10 & Mitsubishi disable that or something

 

[rocknblogger]

I see you figured it out. I was going to report that mine works fine.

 

[Che Castro]

This is gonna be a pain to change my whole setup ,then my harmony setup

 

[chenks]

I dont know i have a Mitsubishi 60c10 & Mitsubishi disable that or something

if you can change input using the mitsubishi suppled remote then the harmony can also do it. if there is no pre-programmed code then just learn the command from the original remote.

 

[Che Castro]

if you can change input using the mitsubishi suppled remote then the harmony can also do it. if there is no pre-programmed code then just learn the command from the original remote.

I have 4 devices that need to be connected to the tv

My tv only has 3 ports anyway

The switcher that did not work with the atv3 has 4 hdmi ports

My backup switcher i had in the closet only has 3 ports,but works with the atv3

I need to get this one
With 5 ports
http://amzn.com/B0049SCB2Y
I have the 3 port version

 

[nobama2012]

Apple TV3 1080p no output fix to try

Try running the hdmi cable direct from the tv3 box to the tv set.

Your HDMI splitter may not handle the correct signal from the TV3 box

If you are running your HDMI splitter into a Home Theater receiver that receiver may not correctly interpret the tv3 hdmi signal........

 

[Che Castro]

I got everything working

I just need that 5 port hdmi switch

Oh and this new UI looks ugly
Big ass icons for apps