I have replaced the original battery on my MacBook Pro 15" mid 2015 2.8GHz iGPU (macbookpro11,4). The manual process I went trough was more straightforward and cleaner than I had expected: in my case, the adhesive was easily removed by applying a small quantity of a soft dissolvent with a syringe (2ml isopropyl alcohol) and a twine thread I had in the kitchen for cooking beef rolls. I couldn't be happier with the results.
The new battery is working like a charm. However, manufacture date and battery temperature, as it can be read with Sensei, Coconutbattery or Aldente, are not shown correctly. The data reported seems to be same of the old battery, so that I tried to clear SMC settings.
First thing I tried was a SMC and PRAM reset. It didn't work. Later I disconnected the battery and pressed and held the power button for a good 15 secs. Then I plugged-in MagSafe charger and restarted the system. I did this in two different ways: firstly, by holding the power button while connecting the charger during 10 secs more, and secondly, by releasing it after connecting the charger. In both cases the booting process got stuck in a loop: Apple logo and progress bar appear, but it re-starts after a while.
Any help with this would be very much appreciated.
The new battery is working like a charm. However, manufacture date and battery temperature, as it can be read with Sensei, Coconutbattery or Aldente, are not shown correctly. The data reported seems to be same of the old battery, so that I tried to clear SMC settings.
First thing I tried was a SMC and PRAM reset. It didn't work. Later I disconnected the battery and pressed and held the power button for a good 15 secs. Then I plugged-in MagSafe charger and restarted the system. I did this in two different ways: firstly, by holding the power button while connecting the charger during 10 secs more, and secondly, by releasing it after connecting the charger. In both cases the booting process got stuck in a loop: Apple logo and progress bar appear, but it re-starts after a while.
Any help with this would be very much appreciated.
Last edited: