Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

tallpaul

macrumors member
Original poster
Jun 11, 2009
81
0
As per title.

I have a 2006 dual ethernet port G5 that I sold to friend who only uses it for storing music movies and photos.

After loads of wifi problems(even installed an airport express rather than rely on standard wireless router) I got a three metre ethernet cable and connected it directly to the computer.

I worked perfectly until recently but now the ATV2 does not see the itunes library when connected this way.

I can try to swap the cable but I would really like to know if it's possible to leave the ATV2 connected this way and somehow access the internet via the G5 being on the home wireless network?

thanks
 
Better to connect to the router

Run the ATV2 wired to the router. Then the ATV2 has a direct internet connection. The G5 is connected via wireless to the same router. Make sure that the ATV2 and G5 have independent IP addresses on the same subnet. Make sure itunes is running on the G5 and logged in to same Apple ID as ATV2. Should work fine.
 
As said above, it's probably easier if you can connect the ATV to the router directly.

However, if that's not practical, there should be no problem in doing what you're trying. I think both the ATV & Mac are auto-sensing, so there shouldn't be a need for a cross-over cable, a regular Ethernet cable will do. You'll obviously need to set up both devices to be on the same subnet (in the G5's Ethernet settings. Don't change the G5's Airport settings).

And on the G5, in the Sharing preference pane, turn on Internet Sharing, and share the Airport connection over Ethernet. That should do it.

I actually have a G5 as a media server too. Possibly, the least practical media server you could get! :p
 
As said above, it's probably easier if you can connect the ATV to the router directly.

However, if that's not practical, there should be no problem in doing what you're trying. I think both the ATV & Mac are auto-sensing, so there shouldn't be a need for a cross-over cable, a regular Ethernet cable will do. You'll obviously need to set up both devices to be on the same subnet (in the G5's Ethernet settings. Don't change the G5's Airport settings).

And on the G5, in the Sharing preference pane, turn on Internet Sharing, and share the Airport connection over Ethernet. That should do it.

I actually have a G5 as a media server too. Possibly, the least practical media server you could get! :p



many thanks for the info.

Both the apple TV2 and G5 are too far away from router so I'll try enabling the internet sharing on the G5 and see if the ATV2 can pick it up.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.