Hi,
I would need various expert advice.
I would like to externally power a mac mini 2020 m1.
Since the power supply can be easily removed I would like to switch to a 12V output in order to power it via a 14.8V 198Wh (13400mAh) V-Lock battery with D-Tap output.
I spent many hours looking for various different solutions and I found this Teradek module, which if I understand correctly should allow 12V output via 5.5 * 2.5 connector:
https://www.teradak.com/products/117.html
Do you think everything is correct?
Doing so at this point with a classic cable from Dtap to 5.5 * 2.5 I would be able to power it.
https://www.amazon.it/Andoer-Connettore-Maschio- Alimentation-Lungitudine/dp/B01IEIO906
Let me know, thank you
I would need various expert advice.
I would like to externally power a mac mini 2020 m1.
Since the power supply can be easily removed I would like to switch to a 12V output in order to power it via a 14.8V 198Wh (13400mAh) V-Lock battery with D-Tap output.
I spent many hours looking for various different solutions and I found this Teradek module, which if I understand correctly should allow 12V output via 5.5 * 2.5 connector:
https://www.teradak.com/products/117.html
Do you think everything is correct?
Doing so at this point with a classic cable from Dtap to 5.5 * 2.5 I would be able to power it.
https://www.amazon.it/Andoer-Connettore-Maschio- Alimentation-Lungitudine/dp/B01IEIO906
Let me know, thank you