Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

lord e55ex

macrumors member
Original poster
Jul 15, 2013
41
5
Hi all

My trusty MacBook Air 2011 has finally given up and died. I am all ready to part ways and put it on eBay, but I wanted to check in with the community.

So the story goes I was backing up to Time Machine and the whole thing just turned off and started bleeping. whenever I tried to turn it back on, more bleeping (you get the gist).

I took it to the Genius Bar and given the age they said its likely the logic board, and the cost to repair by third party likely be more than the device is worth. They did look inside the macbook and couldn’t see anything that could have caused the problem.

So, all I wanted to know, has anyone experienced a similar issue and were you able to fix it?
 

Audit13

macrumors 604
Apr 19, 2017
6,905
1,845
Toronto, Ontario, Canada
Remove the bottom casing, disconnect the battery, attach the charger, don't touch the machine, and see if it boots up on its own without being. If it does, shut it down, perform SMC and nvram reset, reboot.
 

lord e55ex

macrumors member
Original poster
Jul 15, 2013
41
5
Remove the bottom casing, disconnect the battery, attach the charger, don't touch the machine, and see if it boots up on its own without being. If it does, shut it down, perform SMC and nvram reset, reboot.

Gave it a go, still bleeping away. Looks like it’s heading to eBay. Thanks for the input though :)
 

kohlson

macrumors 68020
Apr 23, 2010
2,425
737
Tke note that the SSD has a "sort of" SATA interface. For less than $20 you can get an adapter to make it work with any SATA port. Or, Target Mode may work...I'm saying this mostly to remind you that you should delete any sensitive information on the disk.
 
  • Like
Reactions: lord e55ex
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.