Worked on an iPhone and replaced the screen, home button flex cable and front camera flex cable. Hooked everything back up and it's dead? I can't get it to turn on. Swapped the old screen back on and still nothing. Any ither ideas?
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Help: replaced screen -doesn't turn on
- Thread starter OrangeSVTguy
- Start date
- Sort by reaction score
You do it by yourself? You can go to app support to make sure that you'are well assembly your screen. if not be the problem of the assemblement, then must be the problem of the screen.
iPhone 6. Small crack on the screen so I wanted to switch it. She dropped it too which somehow broke 2 of the flex cables which I also replaced, the crack wasn't a result of the drop. The 2 flex cables was the one for the home button and the speaker/front camera.
I guess I can try and remove all the cables and just hook the original screen back up and see if it turns on.
[doublepost=1473783902][/doublepost]I get nothing from hitting the home button or doing a hard reset. Plugging in the charger gets no reaction either.
I guess I can try and remove all the cables and just hook the original screen back up and see if it turns on.
[doublepost=1473783902][/doublepost]I get nothing from hitting the home button or doing a hard reset. Plugging in the charger gets no reaction either.