Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

umbrellamagic2

macrumors newbie
Original poster
Aug 9, 2023
1
0
Has anyone tried to install a homepod mini using POE? Theoretically it should work, however I am having some trouble. As I increase the volume above 70% the mini shuts off abruptly. It works just fine up until about 70% volume.

I am using a 24-port NETGEAR switch (GS728TP - POE+) and 190w total power. It is the only thing plugged into the switch currently.

I think the power consumption increases too high when I turn up the volume. I am not sure if the switch is underpowered or if it's the POE to UCB-C splitter.

Here is the link to the splitter I am using.

(https://www.amazon.com/gp/product/B07X48CMFY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&th=1)

Has anyone had any success setting up a HomePod mini using POE? What equipment did you use?
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
You could use a usb-c tester in between the device and the PoE power output and see the load being used. I suspect you are going beyond the 25w supported by the adapter you’re using.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.