Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

hajime

macrumors 604
Original poster
Jul 23, 2007
7,906
1,306
Hi, these days people always talk about thermal throttling. How to properly test them as well as the efficiency of the cooling system?
 

Mikael H

macrumors 6502a
Sep 3, 2014
864
539
I guess you could try installing something like the Intel Power Gadget (which, admittedly, hasn't been updated in forever).
Using that tool you can export power consumption, CPU frequency, temperature, and utilization to a csv file for further analysis. Basically: When you stress your computer, do frequencies fall to keep temperatures down? And more importantly: Do they fall below the advertised base clock of the CPU?
 
  • Like
Reactions: hajime

hajime

macrumors 604
Original poster
Jul 23, 2007
7,906
1,306
I guess you could try installing something like the Intel Power Gadget (which, admittedly, hasn't been updated in forever).
Using that tool you can export power consumption, CPU frequency, temperature, and utilization to a csv file for further analysis. Basically: When you stress your computer, do frequencies fall to keep temperatures down? And more importantly: Do they fall below the advertised base clock of the CPU?

I used Intel Extreme Tuning Utility. What I found out is that:

1. As soon as I started the test, the turbo frequency of each core immediately dropped and as soon as the test was done, frequency of each core increased back to near the turbo frequency. Is this normal? Does that mean the cooling system is not good because frequency dropped immediately as soon as I started the test?

2. During the test, frequency of each core dropped to values between the base frequency and the turbo frequency. For example, if the base frequency is 2.8GHz and the turbo frequency is 4.7GHz, starting the test immediately dropped the frequency of each core by 1GHz. Since the frequencies are still above the base clock of the CPU, does that mean there is no thermal throttling even on Intel Extreme Tuning Utility, thermal throttling was highlighted during the test?

3. Is immediately drop of frequency in each core by about 1GHz bad?
 

Mikael H

macrumors 6502a
Sep 3, 2014
864
539
I used Intel Extreme Tuning Utility. What I found out is that:

1. As soon as I started the test, the turbo frequency of each core immediately dropped and as soon as the test was done, frequency of each core increased back to near the turbo frequency. Is this normal? Does that mean the cooling system is not good because frequency dropped immediately as soon as I started the test?

2. During the test, frequency of each core dropped to values between the base frequency and the turbo frequency. For example, if the base frequency is 2.8GHz and the turbo frequency is 4.7GHz, starting the test immediately dropped the frequency of each core by 1GHz. Since the frequencies are still above the base clock of the CPU, does that mean there is no thermal throttling even on Intel Extreme Tuning Utility, thermal throttling was highlighted during the test?

3. Is immediately drop of frequency in each core by about 1GHz bad?
I'm not an expert, to be honest. If I recall correctly, some processors are configured to boost only a limited number of cores to remain near their TDP under load. If all cores are used, the CPU would throttle back to respect its TDP value. In other words, a massively parallel task (like a benchmark test) would probably have the effect you observe.
To be clear: This is technically thermal throttling, but within what's generally considered acceptable levels for a laptop or otherwise energy/cooling limited device.

A computer with no relevant limits in cooling or power supplies should be able to run a CPU at full whack at all times - provided the CPU manufacturer hasn't nerfed the CPU to prevent it from being used in this way.
 
  • Like
Reactions: Erehy Dobon
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.