MP 1,1-5,1 HP SSD7101A-1 WEB GUI won't connect on High Sierra 5,1 ROM 144.0

[chuco915]

Hello all,

Hope this is right place to ask questions about my scenario. Plz advise @tsialex , where I can post.

I'm running High Sierra 10.13 and can't get Highpoint WEB Gui to run. I have HP SSD7101A-1

I use an Nvidia 1080 so I have to stay in High Sierra. ROM 144.0. and can't update to Mojave because I don't have Radeon GPU

I created an AppleRaid ZERO on 3 TB and get the numbers below:

I use 512GB 970_PRO to boot from the HP card (don't have issue with Sleep. Left it over night. When I clicked to wake, it woke up).


My main question is, why can't I use the WEB GUI. The .pdf states it works with 10.13. It keeps telling me it CAN'T CONNECT when I go to the browser.

http://localhost:7402/

https://www.highpoint-tech.com/PDF/macOS/Install_macOS_WebGUI.pdf

Is the WEB GUI worth adding to my system? Will I gave performance if using the WEB GUI to create Raid 0? Or is that my cap? Please advise.

Thanks in advance.

 

[tommy chen]

look at the security preferences and allow to install the driver

 

[chuco915]

I installed the driver. Got the WEB GUI to work.

Anyone know what's the best Raid 0 array for video editing on 970 Pro NVME sticks (3TB)?

 

[tommy chen]

512kb blocks

 

[chuco915]

Before I added the HP driver and WEB Gui, I was getting the RW below with Apple Raid 0:

I installed driver and WEB Gui on High Sierra with 512k Block Size and did Raid 0 via HP

Now my RW are below:

Any way to make RW faster on HP, RAID 0, with 970 PRO?

Thanks!

 

[tommy chen]

you can also try it with 256kb if you notice a difference

i dit not use the HP driver and do my raid0 with diskutility

 

[chuco915]

Gona try that next week. Thanks!