If you own a 27" iMac and can give measurements..

[D4RK STR1D3R]

I need 4 measurements off the 27" iMac in millimeters not inches please.

1. From the top of the face (ie the top of the glass) to the bottom of the face.
2. From the top of the glass to the bottom of the glass.
3. From the front of the iMac to the deepest back depth (trying to determine max depth on the iMac without including the stand).
4. From the front of the iMac along the side until it starts to contour (front to back).

I know this is a very unusual request but this is a wonderful community that has helped me in the past. Thanks for the help!

 

[spinnerlys]

Have you taken a look at these threads?

http://www.google.com/cse?cx=011016...e:forums.macrumors.com&hl=en&as_qdr=all&meta=

 

[D4RK STR1D3R]

Yes. I looked at them and none have the dimensions I'm looking for. Most people give the dimensions of the LCD where as I'm looking for the glass. It's all good. If no one answers me by today I'll just take a trip to Best Buy with my tape measure

 

[spinnerlys]

May I know for what do you need those measurements?

Do you wanna build something yourself with that iMac integrated to it?

 

[D4RK STR1D3R]

I'm building a custom accessory for the iMac and needed the measurements for modeling. I can't buy one myself until the end of the month.

 

[greg400]

http://www.apple.com/imac/specs.html

 

[spinnerlys]

http://www.apple.com/imac/specs.html

Read again please:

I need 4 measurements off the 27" iMac in millimeters not inches please.

1. From the top of the face (ie the top of the glass) to the bottom of the face.
2. From the top of the glass to the bottom of the glass.
3. From the front of the iMac to the deepest back depth (trying to determine max depth on the iMac without including the stand).
4. From the front of the iMac along the side until it starts to contour (front to back).

I know this is a very unusual request but this is a wonderful community that has helped me in the past. Thanks for the help!

 

[greg400]

Read again please:

Eh, you can easily get a close estimate if you were to use an image editing program to figure it out with the two images they have there of the front and back. Although at this point my guess is the OP has already been to the store and measured it.