iMac Pro iMac Pro & 10.13.3

[anticipate]

Hey iMP owners, is anyone seeing any issues with the officially released 10.13.3 update?

When I installed beta 4 (5?) on my iMP, I lost the card slot and all USB-A attached storage. Want to make sure that doesn't happen again....

Thanks

 

[ThatSandWyrm]

Ignore the following that I said before. That was following the Meltdown/Spectre security update. After actually upgrading to 10.13.3, the app crash no longer takes down the OS too.

---

Only problem I've had is that an app that used to crash out when I enabled GPU-assist now takes down the entire OS when it crashes.

 

[khollister]

Good so far here

 

[vincmo]

iMac Pro + Wacom Cintiq users, I would advise NOT upgrading to 13.3!

- I lost connection with my Wacom Cintiq (basically a display you can draw on). USB-C to Displayport or HDMI not working. The computer is flickering and trying to extend the desktop to the secondary monitor and ends up not succeeding. I also noticed graphic glitches when login in (very quick graphical squares with lines and colours for a nanosecond) so there is definitely something going on with the newest graphic driver.

- Also worth mentioning I lost 3 or 4 times the ethernet cable connection (both internet and local network). The ethernet port might also be affected by this update.

My setup was working flawlessly on 13.2. so I am reverting back to this version.

I contacted AppleCare and flagged the problems. Hopefully they are working on it.

 

[ThatSandWyrm]

iMac Pro + Wacom Cintiq users, I would advise NOT upgrading to 13.3!

- I lost connection with my Wacom Cintiq (basically a display you can draw on). USB-C to Displayport or HDMI not working. The computer is flickering and trying to extend the desktop to the secondary monitor and ends up not succeeding. I also noticed graphic glitches when login in (very quick graphical squares with lines and colours for a nanosecond) so there is definitely something going on with the newest graphic driver.

- Also worth mentioning I lost 3 or 4 times the ethernet cable connection (both internet and local network). The ethernet port might also be affected by this update.

My setup was working flawlessly on 13.2. so I am reverting back to this version.

I contacted AppleCare and flagged the problems. Hopefully they are working on it.

1) My 27" Cintiq is working fine (just tested it in ZBrush). Although it is connected to an eGPU box. The two extra 5K displays that I have connected to the iMac itself are working just fine too. Actually better, because being the dual-displayport Dells, at least one of them usually glitches out when waking from sleep or being turned on. Requiring an unplug/replug to reset them to the proper dual-input 5K mode. (knocks on wood)

Maybe you just need to update your drivers? Wacom did release a new version pretty recently on December 19th.

2) I haven't had any problem with my ethernet port or network connectivity. Try renewing your DHCP lease (SysPrefs->Networking->Ethernet->Advanced->TCP/IP Page). If that doesn't do it, try bouncing your router.

 

[khollister]

2) I haven't had any problem with my ethernet port or network connectivity. Try renewing your DHCP lease (SysPrefs->Networking->Ethernet->Advanced->TCP/IP Page). If that doesn't do it, try bouncing your router.

No ethernet issues here either

 

[anticipate]

Must have been an old beta issue...all is now working for me under 10.13.3. Thanks guys!