Hello everyone,
I'm currently trying to upgrade the SSD of my iPhone 15 Pro from 128 GB to 1 Terabyte. I have already soldered the new SSD and tried various methods to flash it, including iTunes, as well as programs like 3uTools and a program from shalou.net, a Chinese manufacturer. Unfortunately, I have not been successful so far.
The main issue occurs when the program attempts to write to the cores. Afterward, it loses connection to the device or it is no longer recognized. I have tried different iOS versions, including iOS 17.0, but without success.
Has anyone had similar experiences or knows a solution to this problem? Any help or advice would be greatly appreciated!
with itunes i have the error 4014
Log of 3utools:
12:59:50.117: LibVersion: 20240808
12:59:50.117: Start flash
12:59:50.117: Checking PC DiskSpace
12:59:50.117: Detecting Connection
12:59:50.117: Found a device with mode: DFU
12:59:50.117: Detecting ProductType
12:59:50.117: matching device type through original information
12:59:50.128: Checking iDevice firmware C:\3uToolsV3\Firmware\iPhone16,1_18.0_22A3354_Restore.ipsw
12:59:50.128: Extract BuildManifest.plist
12:59:50.128: Extracting Restore.plist from IPSW
12:59:50.128: Firmware version: 18.0
12:59:50.128: Product Build: 22A3354 Major: 22
12:59:50.129: Is Image4 supported: TRUE
12:59:50.219: Reading NONCE
12:59:50.220: Requesting SHSH
12:59:51.375: Enter Recovery Mode
13:00:05.790: Sending Ramdisk
13:00:17.635: Sending DeviceTree
13:00:17.652: Sending RestoreSep
13:00:17.982: Sending KernelCache
13:24:20.658: Restoring
13:24:20.659: ERROR: Device failed to enter restore mode.
13:24:20.659: Please make sure that idevice is connected with the usb cable and Apple Device Driver is installed correctly.
I'm currently trying to upgrade the SSD of my iPhone 15 Pro from 128 GB to 1 Terabyte. I have already soldered the new SSD and tried various methods to flash it, including iTunes, as well as programs like 3uTools and a program from shalou.net, a Chinese manufacturer. Unfortunately, I have not been successful so far.
The main issue occurs when the program attempts to write to the cores. Afterward, it loses connection to the device or it is no longer recognized. I have tried different iOS versions, including iOS 17.0, but without success.
Has anyone had similar experiences or knows a solution to this problem? Any help or advice would be greatly appreciated!
with itunes i have the error 4014
Log of 3utools:
12:59:50.117: LibVersion: 20240808
12:59:50.117: Start flash
12:59:50.117: Checking PC DiskSpace
12:59:50.117: Detecting Connection
12:59:50.117: Found a device with mode: DFU
12:59:50.117: Detecting ProductType
12:59:50.117: matching device type through original information
12:59:50.128: Checking iDevice firmware C:\3uToolsV3\Firmware\iPhone16,1_18.0_22A3354_Restore.ipsw
12:59:50.128: Extract BuildManifest.plist
12:59:50.128: Extracting Restore.plist from IPSW
12:59:50.128: Firmware version: 18.0
12:59:50.128: Product Build: 22A3354 Major: 22
12:59:50.129: Is Image4 supported: TRUE
12:59:50.219: Reading NONCE
12:59:50.220: Requesting SHSH
12:59:51.375: Enter Recovery Mode
13:00:05.790: Sending Ramdisk
13:00:17.635: Sending DeviceTree
13:00:17.652: Sending RestoreSep
13:00:17.982: Sending KernelCache
13:24:20.658: Restoring
13:24:20.659: ERROR: Device failed to enter restore mode.
13:24:20.659: Please make sure that idevice is connected with the usb cable and Apple Device Driver is installed correctly.
Last edited: