Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

61chrysler

macrumors newbie
Original poster
Dec 26, 2014
8
2
I have a 29" Toshiba (720) TV. When I connect it to my Mini (10.10.5) with HDMI to HDMI, the image is too large and I cannot see top or bottom tool bar so I can not experiment with resolution, etc.

It is my understanding that HDMI to HDMI should work with a 720p TV. If this should work for me I must be doing something wrong. I am 70 and would like to ask if someone can walk me through this.

Thanks,

Ray
 

Kaida

macrumors 6502
May 28, 2016
351
145
Singapore
Only Samsung TV, I get the same problem, I had to go to menu -> Picture -> size to set it up as fit to screen for it to work. There should be a similar function in the Toshiba TV remote?
 
  • Like
Reactions: jpietrzak8

jpietrzak8

macrumors 65816
Feb 16, 2010
1,053
6,100
Dayton, Ohio
I have a 29" Toshiba (720) TV. When I connect it to my Mini (10.10.5) with HDMI to HDMI, the image is too large and I cannot see top or bottom tool bar so I can not experiment with resolution, etc.

Ah, this is a feature of television sets known as "overscan". The idea is to increase the size of the video image to the point where it fills the entire physical screen, so no portion is left dark. This is usually fine for watching normal TV, but bad for use as a computer monitor.

It is usually possible to turn off overscan using the TV's settings, but that depends on the model of TV. I've read that at least some Toshiba TVs have a button on the remote called "Pic Size", which will allow you to select various size options; if you see a "Native" option, that should turn off overscan. You might also be able to do this from the TV's settings menu, as Kaida notes.

You can also modify the image being sent from the Mini, so that it fits within a TV using overscan. If you go to System Preferences and select the Displays icon, you'll get a selection of controls for your display. If the Mac has recognized that you are connected to a TV set, it should offer you the ability to set up an "underscan". This web page provides a little more info on that:

https://support.apple.com/en-us/HT202763
 
Last edited:

61chrysler

macrumors newbie
Original poster
Dec 26, 2014
8
2
I have a 29" Toshiba (720) TV. When I connect it to my Mini (10.10.5) with HDMI to HDMI, the image is too large and I cannot see top or bottom tool bar so I can not experiment with resolution, etc.

It is my understanding that HDMI to HDMI should work with a 720p TV. If this should work for me I must be doing something wrong. I am 70 and would like to ask if someone can walk me through this.

Thanks,

Ray
Thanks for the prompt responses. Based on your assistance. I was able to solve the issue in approximately 2 minutes.

Thanks again,

Ray
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.