Mac Pro 1,1 Windows 10 install

[blindpcguy]

ok i just got a mac Pro 1,1 off ebay for a good deal waiting on my mini 6pin to full 6pin to put in a msi geforce gtx 650. and am going to upgrade it to el capitan and install windows 10 pro 64bit for a little gaming how would i go about installing 64bit windows can i boot fromm usb or do i need dvds and such

 

[JedNZ]

I used a bootable DVD, but you could probably used a bootable USB stick if it's curated correctly.

Check out these posts:
Installing Windows x64 on Mac Pro 1,1
WIN10 Volume on Mac Pro (check out my post that may help you build a DVD if you get the "Select CD-Boot type - 1 2" message - also check out this link that describes a method to curate a bootable DVD).

 

[flyinmac]

ok i just got a mac Pro 1,1 off ebay for a good deal waiting on my mini 6pin to full 6pin to put in a msi geforce gtx 650. and am going to upgrade it to el capitan and install windows 10 pro 64bit for a little gaming how would i go about installing 64bit windows can i boot fromm usb or do i need dvds and such

Check out how I put Windows 10 on my Mac Pro 1,1 here

https://forums.macrumors.com/thread...allation-no-bootloaders-or-efi-hacks.1905564/

 

[neongold]

ok i just got a mac Pro 1,1 off ebay for a good deal waiting on my mini 6pin to full 6pin to put in a msi geforce gtx 650. and am going to upgrade it to el capitan and install windows 10 pro 64bit for a little gaming how would i go about installing 64bit windows can i boot fromm usb or do i need dvds and such

I'm using Yosemite on Mac Pro 2,1 with a. 250GB SSD, multiple hard drives, 32GB of memory and a Nvidia GTX 660.

I personally installed Windows 10 doing the following.

Installed Windows 7 64Bit via Boot Camp Assistant from Yosemite into an empty Hard Drive in my second hard drive bay.

Installed BootCamp 64Bit drivers using this method that installs 64Bit drivers on Unsupported Systems

Then Upgraded to Windows 10 for free.

Everything works perfectly and runs natively including Boot Camp Controls and the ability to boot into OSX from Windows. I'm also using BootChamp to booth to Windows from Yosemite. *BootChamp doesn't work in El Capitan.*

 

[blindpcguy]

ok thanks and why would it not wor in el capitan sip im gussing but yeah il fallow that install 7 first and then go to 10 was debating if thats how i should do it and now i know i get the m both free through mm my collage so yrah. thanks for the help now if my pcie cable for mac pro would get here id put my 650 in and get things going

 

[neongold]

ok thanks and why would it not wor in el capitan sip im gussing but yeah il fallow that install 7 first and then go to 10 was debating if thats how i should do it and now i know i get the m both free through mm my collage so yrah. thanks for the help now if my pcie cable for mac pro would get here id put my 650 in and get things going

It should work the same for El Capitan. What doesn't work is BOOTCHAMP on El Capitan, a piece of software for OSX that allows you boot directly into Windows from OSX. https://kainjow.com/. This is convenient for me because I don't have a EFI apple boot screen when I use my GTX 660 on my Mac 2,1.

 

[blindpcguy]

k so i couldnt just go into system prefs startup disk and choose windows and rebot and wnt the devs update it foreel capitan eventually

 

[neongold]

k so i couldnt just go into system prefs startup disk and choose windows and rebot and wnt the devs update it foreel capitan eventually

Of course you can do that.

I'm just lazy lol

 

[blindpcguy]

ok coll probably what il end up oing then still debating wither to go yosemite or el capitan as updates are still pretty big on el cap but i got tell monday to decide

 

[andrew nz]

Recently i reinstalled my 7300GT to enable boot screen because i have a 280X R9 in the main 16x slot1 and the nvidia in slot 4. This enables bootscreen.
When i reboot I can select every available boot option including recovery disks but not usb efi boot option which is offered in this linked method.
I have reformatted the usb and tried other usb boot option offered in various forums here on macrumors but the same persists. I can install on the media and prepare the usb itself but nothing is available on boot.

I have tried modifying Bootcamp to enable install of boot options on usb and also on dvd.
My dvd drive on mac pro 1.1 is flaky and cannot write almost anything so usb is the only viable option at this point.
Modifying bootcamp only works on 10.11.6 or possibly later. It will not work under 10.10.5.
See these:

https://www.techrepublic.com/article/how-to-install-windows-10-in-boot-camp-on-unsupported-macs/

https://www.techrepublic.com/articl...-windows-from-a-usb-flash-drive/#postComments


Anyone have ideas what am I missing?

 

[crjackson2134]

@andrew nz

You keep posting in 2 year old threads. If you need some help, I strongly recommend you go to the Windows and other OS’s sub-forum. Start a new thread requesting help there.

https://forums.macrumors.com/forums/windows-linux-others-on-the-mac.86/

 

[ADDvanced]

Thanks! Didn't know that forum existed.
[automerge]1597947575[/automerge]
Wrong thread.