Started my adventure with MP4,1, updated to 5,1 and x5680 and after few installation attempts I finally managed to install Ventura 13.2.1 using 0.61 OCLP, but whenever I try to boot with RX 580 installed the system does not boot to OS, it boots to boot recovery assistant and tells me I have to reinstall the OS, if I switch to GT120 the system boots fine but there is no acceleration, I just did a clean install with RX580 all the way through installation process and got exactly the same result, Mac won't let me boot with both GT120 and RX580 installed in the system, it hangs as soon as loading bar appears underneath apple logo... tried to prepare the installation usb on iMac 13,2 and Mac Mini 2018 no difference, what am I doing wrong? The same thing was happening with 13.1 installed, I also tried Quadro K600 GPU which gave the same result, tried with 1660 super and even got boot screen, again the system does not have acceleration but boots to OS, is there some setting in OCLP I need to select to allow it to boot with metal capable GPU?