Mac Pro CPU Fan Array Stuck.

[ChrisFerri]

I recently bought two X5355 CPU's to put in my Mac Pro 1,1. But when I go to remove the fan array it seems to be stuck. The top seems to come off fine but it seems that the bottom right is stuck in the back or something. I read to use a PCI cover and try to pry it but I wasn't sure if prying it on the CPU heatsink is a good idea. Any suggestions?

 

[wonderspark]

Try a heat gun, or maybe hairdryer to loosen adhesive. Make sure there isn't some bolt or clip you forgot, as well.

 

[ChrisFerri]

Well there is only one screw to remove at the top of the array and thats it. I don't think there is any adhesive though. Could be wrong.

 

[FrancoisC]

I had a 1.1 too once, and remember taking it apart to clean it up, there is no adhesive anywhere.

Maybe have a look at some teardown guides, maybe there's a screw you're not seeing or something?

 

[ChrisFerri]

Finally with enough force I got it out. So now lets just help I can get the CPU's up and running and have an Octocore Mac Pro!

 

[FrancoisC]

Good!

Just be careful and take your time, and you shouldn't have any problem.

If you ever built a PC in your life, this should be easy!

 

[ChrisFerri]

Upgrade complete!