Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Mac Pro GTX 660Ti x 2

P

PoloSwelsen

macrumors newbie
Original poster
Dec 19, 2012
12
0
Hey Guys,

I recently bought a GTX 660Ti Graphics card for in my 8-core Mac Pro 2010. It works fantastic!! however i was wondering if there is a possibility to run two of those in one Mac Pro without using a external PSU.

I know you only have two 6pin connecters in the Mac Pro, but is there a way you can split each connector so that you will have 4 6pin connectors instead of two?
that way it would be possible to have two GTX 660Ti's in a single Mac Pro, right?

and what about the PSU, will it be enough? i've read somewhere that the Mac Pro's PSU is about 1000 - 1300W. But i'm not sure though.

Please let me know because i would lóve to have 2 of these amazing graphics cards!
 
I wouldn't recommend it. IIRC the cables wouldn't be able to supply enough power. You'd be better off powering the other card with an external PSU.
 
So what is the maximum power that the Mac Pro can deliver to video cards? The 660Ti uses 150-200 max! Do you really think that 400W is too much?
I really don't want to use an external PSU. (Looks really ugly)
 
Not suggested at all, but you could go just one GTX 680. 300W is the max suggested for total power draw on all PCIe lanes together including the 2 x 6pin power cables.
 
I've read that the GTX 680 wouldn't fit in a Mac Pro and I believe it doesn't come with 6 pins but with 8 pin connectors ):
 
I have an EVGA GTX660Ti and I found a power consumption of a super clocked GTX 660 Ti by MSI which says the maximum power use of this card is 146W... But doesn't a super clocked card consume more power?
Still two sc cards would not consume 300 W (146x2=192).
Let's say power usage isn't the issue, CAN I split the 2 x 6 pin to 4 x 6 pin or would I overheat the motherboard with doing that or would it be fine?

Ps is there a simple way I can stress out my GPU and measure the power usage?
 
PoloSwelsen said:
I have an EVGA GTX660Ti and I found a power consumption of a super clocked GTX 660 Ti by MSI which says the maximum power use of this card is 146W... But doesn't a super clocked card consume more power?
Still two sc cards would not consume 300 W (146x2=192).
Let's say power usage isn't the issue, CAN I split the 2 x 6 pin to 4 x 6 pin or would I overheat the motherboard with doing that or would it be fine?

Ps is there a simple way I can stress out my GPU and measure the power usage?
Click to expand...

Here you go: http://www.amazon.com/450W-Graphics-Power-Supply-Juice/dp/B001AO4O98

It's internal so you don't have a box outside the tower. If you decide to use splitters it might overload the traces on the back pane. It may not. If you decide to split the power could you please let us know the results?
----------
wildgiles said:
Not suggested at all, but you could go just one GTX 680. 300W is the max suggested for total power draw on all PCIe lanes together including the 2 x 6pin power cables.
Click to expand...

That 300W figure is excluding the two 6 pin cables from the back pane. It's 75W per PCIe slot and then it's 150W combined from the 2x 6 pin.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
PoloSwelsen said:
Let's say power usage isn't the issue, CAN I split the 2 x 6 pin to 4 x 6 pin or would I overheat the motherboard with doing that or would it be fine?
Click to expand...

That's a really bad idea. Nobody knows how much power these will be pulling from the aux power connectors.

You know OS X doesn't support SLI, right?
 
I am not putting an external PSU in my Pro, thanks for the tip though. That way it doesn't look that bad. Smart thinking.

Yes I know OSX doesn't support SLI. I think I will have to do it with this 660ti then. It isn't a bad card at all! I was just wondering. It is far better than the original 5770. Thanks for all your replies and great help!

I love to use adobe after effects and could use a little more cuda cores, so that's the reason I was wondering about a second card for the ones who like to know ;-)

----------

Theoretically, asuming one card uses 146W max. There wouldn't be a problem since each card will get 75W from the PCIe slot and half of the 75W from each 6pin adapter (2x37,5 = 75). So in total they will receive 150W when needed.
So you will stay beneath the 300W, and you'll not stress out the 6pin adapters...
Where is the problem then?
 
PoloSwelsen said:
I am not putting an external PSU in my Pro, thanks for the tip though. That way it doesn't look that bad. Smart thinking.

Yes I know OSX doesn't support SLI. I think I will have to do it with this 660ti then. It isn't a bad card at all! I was just wondering. It is far better than the original 5770. Thanks for all your replies and great help!

I love to use adobe after effects and could use a little more cuda cores, so that's the reason I was wondering about a second card for the ones who like to know ;-)

----------

Theoretically, asuming one card uses 146W max. There wouldn't be a problem since each card will get 75W from the PCIe slot and half of the 75W from each 6pin adapter (2x37,5 = 75). So in total they will receive 150W when needed.
So you will stay beneath the 300W, and you'll not stress out the 6pin adapters...
Where is the problem then?
Click to expand...

The problem arises with distribution, Will the card pull a clean 75W from the PCIe slot or will it pull less and the remainder from 1x 6 pin split in two? I would 'guess' it's 75W from the slot first and foremost but I couldn't say for sure. If it were me I'd go for the 2x 660ti as the power draw matches up within acceptable levels.
 
And what if it reaches above the 75W per lane or 6pin adapter. Would that harm the computer? Or Would it just crash and turn off.
 
PoloSwelsen said:
And what if it reaches above the 75W per lane or 6pin adapter. Would that harm the computer? Or Would it just crash and turn off.
Click to expand...

Nothing is known, some will tell you that it damages components, others will say the PSU will 'trip'. Theoretically it's possible, the PSU provides enough power but the channels that take the power to those 2x 6 pin connectors called 'traces' are not rated. As in nobody, at least here, knows how much extra drain they can handle. They may be 'thick' enough to handle twice the 75W, they might not be. If they can't handle the extra they could fry, melt, fizzle.

It's really an area of unknown and something many of us are looking into with interest. The only option is to pioneer and inform or go with a second PSU.
 
Well than maybe i will do Some research on the max power usage a 6pin can handle and how much the card really uses, because I don't wanna melt my Pro actually ;-)
 
PoloSwelsen said:
Well than maybe i will do Some research on the max power usage a 6pin can handle and how much the card really uses, because I don't wanna melt my Pro actually ;-)
Click to expand...

If you want to be safe (Best to be) then go with a second PSU if using more power than a 5870. It really isn't worth the guess if you want a stable, worry free machine. Best of luck.
 
PoloSwelsen said:
There wouldn't be a problem since each card will get 75W from the PCIe slot and half of the 75W from each 6pin adapter (2x37,5 = 75).
Click to expand...

How do you know that is the distribution? What if it pulls the 150W evenly over all three? 50+50+50. Then the second card does the same, and you are pulling 100W each over the aux connectors spec'd to 75W each.
 
ActionableMango said:
How do you know that is the distribution? What if it pulls the 150W evenly over all three? 50+50+50. Then the second card does the same, and you are pulling 100W each over the aux connectors spec'd to 75W each.
Click to expand...


That's true. I will do some more research (i recently found out that the card will reach 130-140W MAX). As soon as i know more, i will let you guys know.
Thanks for all the help!
 
If this card only pulls ~140 watts, why does it need 2 6 pin plugs .... Wouldn't it get its power needs from just the pci slot and 1 6 pin cable?
 
I have 2 gtx 660's in my Mac Pro and although they only use 1 6-pin each, the power usage is only a bit less than the 660 ti. I reckon the power will be fine, you just need to figure out how to plug them in due to lack of cables/ports.
 
To everyone,
Tbone mentioned that he is running two GTX 660's in his Mac Pro. If so, do I have to remove the bridge connector when using OS X? I play mostly games on my Win7 64-bit partition. I get good frame rates running medium settings on my HD5870 running Battlefield 4. However I have to play lowest settings for Metro Last Light.

I want to upgrade to the EVGA GTX 660 SuperClocked because it seems like a nice card and I can achieve over 32 fps on 1080p with high settings for both titles in one card. Furthermore, since it uses only one 6-pin connector... Why not get two and SLI both. I was told neither Xfire and SLI work on OSX, but it does on Windows through bootcamp.

Should I just save up and get the EVGA GTX 680 MAC Edition? Or I could use both 660's and save myself $200+?
 
Hey, i just recently upgraded my Mac Pro from a 660Ti to a 680 4GB version with 2x6-pin. NOT The Mac edition. And it works delightful! So I think that that will be your best option since SLI does not work as good as it should. Many games and other software does not support SLI / crossfire.
Consider having 1 ultimate card instead of 2 other cards
 
PoloSwelsen
That what I was ultimately thinking about it. However, if I go with the GTX 680 Non-MAC, Did you get a booting screen?
 
I need it to be able to choose Mac or Windows through bootcamp. Otherwise, I have to flash the card to be able to have a boot screen.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back