Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

slvrscoobie

macrumors 6502a
Original poster
Mar 24, 2013
664
207
NJ
Hey guys and gals.
Weird thing happened to my MBP the other day. I was using it to check out my ADB-S webpage and i got up to get a drink. I sat back down and chrome said there was no internet.
Sure enough i look at the wifi icon and its black with an X. (if i recall correctly) - says its turned off.
Hmm, ok, try to turn on, no dice.
Ok, reboot.....
Now its a pie shape with an x in the middle and hovering says 'No wifi hardware installed'
Well crud!
Reset SMC + NVRAM
same thing
Open it up, wiggle the cable...
Still no
replace the airport card with one from my wifes 15"
nothing
dang it! - ok, cable must be bad. I still have BT but no wifi. (why couldnt those be reversed)
Buy a new cable and card on ebay. They arrived today. Installed, reset SMC And NVRAM
Still 'No Wifi hardware installed'
Im hoping this isnt like a motherboard issue now...
things of note: I had the continuity hack installed with the newer 4ACX card for .. 3 years? I uninstalled it today to see if the new card / cable would work if i uninstalled that. it didnt change anything.
Im out of ideas and searching just brings up replacing the card or SMC resets.
 
oh and the BT seems to work fine...
[doublepost=1560372602][/doublepost]
How much was the card? Maybe try something from OWC? Might be better quality?
https://eshop.macsales.com/item/Apple/6616510/

When you swapped it, did your card work in your wife's macbook?
It did not, which is why i thought it must be the cable...i just tried with her card and the new cable, still nothing.
it was an ebay apple card - said it was from a working machine. $10 for an old card, and ribbon cable, looked fine, other than some dust when it arrived. I also pulled the ribbon cable from my 13" mac and plugged it in to test, and still nothing...
I bought a 2nd card and cable from Ebay, maybe i got a bum card / cable. I tried to swap em around (old card, new cable, and new card old cable too). but im not sure i reset everything between there.
Im starting to lean towards the bad mobo connection or something :(
 
Last edited:
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.