Soez, I've gotten my hands on a MacBook Air that needs a new display. The client fell asleep on it and surprisingly did no damage to the lid or bezel, just the panel.
I ordered a new one from Buy.com for about $100, shipped. When I opened it, it turned out to be the exact model number and was even manufactured around the same date as the MacBook Air itself!
I got to prodding and prying, careful not to sneeze for fear that half of the components would dissolve into the air like dust.
Look at the size of this thing! I can say with complete confidence: this is the smallest screw I've ever handled.
Also, I must say, Apple seems to have been a bit more considerate in the application of thermal paste during manufacturing [something that had caused negligible, yet present, thermal anomalies in their other Intel notebooks, prior and for a term afterward. It wasn't necessarily an issue, but it certainly did not reflect Apple's renowned attentiveness] Perhaps they were just being that considerate about the weight of the MacBook Air 0.o
At any rate, the notebook came apart like LEGO's™. Honestly, it was by far the most pleasant teardown I've experienced. On behalf of all technicians that have battered fingers and balding heads, thank you, Johnny Ive, thank you. *single tear*
But seriously, this thing is built more like those slot-fit balsa models you bought at the toy store, on a whim, as a child.
Every notebook prior, including Apple's, have been hell to disassemble. I will admit, Apple has always been a bit more sensible in their layouts and so I've stopped working with other brands, all together, but they still had the inherent flaw of having parts attached to a frame attached to a case attached to a lid with yet more parts attached to it. The unibody models are merely parts attached to a frame with a lid.
Taking the notebook down almost to the bare parts, I finally reached all of the cables and screws necessary to remove the display housing. Afterward, I began to remove the bezel, something that intimidates any person whom attempts it. I must say, it was less-than-dramatic. It only takes patience and sense. Even the rubber gasket was spared.
[Why, Apple, would you design something like this to be un-dissasemble-able…new word. It just seems irrational that one would have to pay $600 for a $100 part because your designers choose form over practicality, in such cases. Props on making the iPhone 4 easy to access, but really, such ignorance mitigates the advantages of the unibody structure. Don't be so paranoid about visible screws, okey dokey? What next? Are you going to weld and grind-smooth the bottom lid of all Unibody models to hide the final traces of what you seem to consider "flaws?"]
OK, swapped the displays, perfect. It couldn't have been easier, actually. To be honest, it's less stressful than the original White MacBooks: not having to concern yourself with those tiny plastic fastening bastards, damn those things! I am tired of super glue on my fingers ><
Tested…bingo! Working just as new and boots just as well.
Let's get that bezel back on. Turning to the super-glue [dammit], I mean cyanoacrylate, I attached the rubber gasket to the back of the bezel. After allowing it to cure, I applied more CA to the magnesium(?) frame inside the lid. Sliding the bottom of the bezel into place, first, I slowly squared the gasket with the sides of the lid and pressed it into place, being sure the pin near the iSight finds its way into the corresponding hole.
Et voila! A wholly unblemished MacBook Air!
Well, almost…
The only sign of "entry" is the stubborn lower-right gasket, as the lid does not exhibit any means of securing it in the intended form.
Oh joy! I was sad to see it leave, as it was a joy to type on, with the super-slim and low-profile form. It's the least invasive portable I've ever handled! It feels like it's intended to be carried and placed on your lap, unlike most notebooks, my MacBook Pro included. However, the sluggishness completely mitigates this feature. I'll take snappiness and ports with my lashings, plz, thx chu.
Well, there she is! A re-screened MacBook Air with intact bezel and gasket. A first, as far as I've encountered. Also, I feel like this could be done without removing the display assembly at all. We'll see, next time
I ordered a new one from Buy.com for about $100, shipped. When I opened it, it turned out to be the exact model number and was even manufactured around the same date as the MacBook Air itself!
I got to prodding and prying, careful not to sneeze for fear that half of the components would dissolve into the air like dust.
Look at the size of this thing! I can say with complete confidence: this is the smallest screw I've ever handled.
Also, I must say, Apple seems to have been a bit more considerate in the application of thermal paste during manufacturing [something that had caused negligible, yet present, thermal anomalies in their other Intel notebooks, prior and for a term afterward. It wasn't necessarily an issue, but it certainly did not reflect Apple's renowned attentiveness] Perhaps they were just being that considerate about the weight of the MacBook Air 0.o
At any rate, the notebook came apart like LEGO's™. Honestly, it was by far the most pleasant teardown I've experienced. On behalf of all technicians that have battered fingers and balding heads, thank you, Johnny Ive, thank you. *single tear*
But seriously, this thing is built more like those slot-fit balsa models you bought at the toy store, on a whim, as a child.
Every notebook prior, including Apple's, have been hell to disassemble. I will admit, Apple has always been a bit more sensible in their layouts and so I've stopped working with other brands, all together, but they still had the inherent flaw of having parts attached to a frame attached to a case attached to a lid with yet more parts attached to it. The unibody models are merely parts attached to a frame with a lid.
Taking the notebook down almost to the bare parts, I finally reached all of the cables and screws necessary to remove the display housing. Afterward, I began to remove the bezel, something that intimidates any person whom attempts it. I must say, it was less-than-dramatic. It only takes patience and sense. Even the rubber gasket was spared.
[Why, Apple, would you design something like this to be un-dissasemble-able…new word. It just seems irrational that one would have to pay $600 for a $100 part because your designers choose form over practicality, in such cases. Props on making the iPhone 4 easy to access, but really, such ignorance mitigates the advantages of the unibody structure. Don't be so paranoid about visible screws, okey dokey? What next? Are you going to weld and grind-smooth the bottom lid of all Unibody models to hide the final traces of what you seem to consider "flaws?"]
OK, swapped the displays, perfect. It couldn't have been easier, actually. To be honest, it's less stressful than the original White MacBooks: not having to concern yourself with those tiny plastic fastening bastards, damn those things! I am tired of super glue on my fingers ><
Tested…bingo! Working just as new and boots just as well.
Let's get that bezel back on. Turning to the super-glue [dammit], I mean cyanoacrylate, I attached the rubber gasket to the back of the bezel. After allowing it to cure, I applied more CA to the magnesium(?) frame inside the lid. Sliding the bottom of the bezel into place, first, I slowly squared the gasket with the sides of the lid and pressed it into place, being sure the pin near the iSight finds its way into the corresponding hole.
Et voila! A wholly unblemished MacBook Air!
Well, almost…
The only sign of "entry" is the stubborn lower-right gasket, as the lid does not exhibit any means of securing it in the intended form.
Oh joy! I was sad to see it leave, as it was a joy to type on, with the super-slim and low-profile form. It's the least invasive portable I've ever handled! It feels like it's intended to be carried and placed on your lap, unlike most notebooks, my MacBook Pro included. However, the sluggishness completely mitigates this feature. I'll take snappiness and ports with my lashings, plz, thx chu.
Well, there she is! A re-screened MacBook Air with intact bezel and gasket. A first, as far as I've encountered. Also, I feel like this could be done without removing the display assembly at all. We'll see, next time
