Need Help Please!!! Unlocking My New MacBook Pro!

[niggiebro]

I just got this MacBook Pro, Tiger, 10.4.8, Intel Core2 Duo 2.33 GHz, 2 GB, 667 MHz DDR2 SDRAM, from a third party person, but it's not allowing me to install programs without "Administrator Password". I don't know the Admin PW... (I'm glad it set to "Auto-Login"), and I know you can reset it using the OSX installation disc by holding the "C" key at Startup, but my Mac Book starts straight into OSX.

I tried inserting the Disc in the DVD drive and tried using the "Startup Disk" in the "System Preferences", but the only options available are "Mac OS X, 10.4.8" and "Network Startup" I don't see the OSX Installation Disc.

I did a little research on Apple website and found that maybe I need to disable "Open Firmware Password Protection" first before I could Reset the Administrator Password, but after reading a little it doesn't state how to "Disable" Open Firmware, but how to "Enable" it, it's disabled by Default. It gives an option on how to "Trouble Shoot" the Computer running Open Firmware, but only on "PowerPC-based" computer and not "Intel-based", because they don't use Open Firmware and my MacBook Pro is Intel-based!!!

The other thing I noticed is a program called Deep Freeze Controller Version, by Faronics ver. 3.10.070.0134. Could this be the problem and if it is how do I get rid of it!!! It also asks for a Password which I do not know!

Man I hope someone here can HELP as I always come here for all me questions!

 

[xtopher]

did it come used or something??? maybe where you got it from put a password on it

 

[Father Jack]

I presume you have contacted the third party?



FJ

 

[bearbo]

try put the disk in there, and restart while holding Alt/Option

 

[bankshot]

I know you can reset it using the OSX installation disc by holding the "C" key at Startup, but my Mac Book starts straight into OSX.

I believe it's the "D" key on Intel Macs (D for DVD).

 

[spork183]

contact the person you bought it from, and never buy a Mac on a street corner again...

If that doesn't work, wipe the drive and reinstall.

Deep Freeze is workstation recovery software that monitors user changes and resets the machine to a baseline state after someone messes it up.

Next time make sure the machine isn't part of a workstation arrangement. I hope you got a good deal on it.

 

[EricNau]

Insert the disks and restart the computer. Select your language but do not proceed any further into the installation!

From here, under the installer menu (right next to the blue apple in the upper-left corner) select "Reset Password."

 

[gauchogolfer]

Can you boot into single-user mode? If so, this would indicate that a firmware password has not been implemented. To boot this way, hold down command-s while the machine boots.

Apple.com link

 

[e12a]

Switch around your RAM sticks.

no, I'm not kidding. Read apple support for that Open Firmware Reset...

nothing can beat physical access to a computer...

"Warning: The Open Firmware Password can be reset and changed by any one of the following:

1. By any administrator user, as designated in the Accounts preferences (or in Server Admin).
2. Via physical access to the inside of the computer.
3. When the computer is started up in Mac OS 9."

Disclaimer: This method is available by a simple google search and is implied on Apple Support. Please change my post if you think that it is too "revealing"

 

[sycho]

The MacBooks don't have open firmware. They have EFI

 

[p0intblank]

This is a long stretch, but try continuing without a password and click OK.

 

[psingh01]

This is a long stretch, but try continuing without a password and click OK.

That is probably the best advice I've seen here. Sometimes the most obvious things need to be spelled out cause people simply overlook them

BTW I did not know that you pressed 'D' to boot from an Intel DVD drive? Had I had a problem I would be stuck pressing 'C' the whole time

 

[quigleybc]

Shade + E

 

[gauchogolfer]

The MacBooks don't have open firmware. They have EFI

True, but you can still enable firmware passwords even on EFI.

 

[gameguy3001]

BTW I did not know that you pressed 'D' to boot from an Intel DVD drive? Had I had a problem I would be stuck pressing 'C' the whole time

you dont press 'D' to start from a disk, the 'D' stands for diagnostic, it will get your computer to boot the the apple hardware test which is located on install disk 1 as well. you still need to hold down 'C' to boot to the installer and to get to disk utility/reset password

 

[e12a]

The MacBooks don't have open firmware. They have EFI

Doesnt matter. Try the RAM switch.

And if the real problem is indeed a firmware password...you cannot boot from any CD...that's what it's designed for. Holding alternative boot up keys like C or D will not bring up the boot up screen.

Read above methods of circumvention. I know its for OF, it doesnt matter.

and I've personally tried firmware password protection. To get to the OS selection screen (bootcamp), a password would be needed to get there. I also believe that after putting in that password with an installation disk in the computer brings you to the boot selector, from which you can reinstall OSX.

Try holding Option down while booting. If a password is prompted, then it is indeed password protected. If not, it's something else. If it is, then do the ram switch.

 

[logandzwon]

The perpose of the firmware password to limit the usability of the machine if it is aquired illegally. As long as you have acuired it legitimenty, and might have to prove it, the apple store or apple support can help you reset it.

 

[niggiebro]

I'd like to thank all of you for your comments and help!!!

Apparently I was trying to boot up using the Installation disk not supported for my MacBook Pro which is Intel-based! So it looks like I have to go buy a copy of Tiger for a Intel-based Mac!