There´s a new ssd from Photofast in 1.8 Zif "V3"for our Air Rev.A, could this be the one that solve our nightmares????
It appears to be as fast as the Mtron and others that doesn´t work, it use an indilix controller. If this works, and speedy as the specs said, it could be a good choice. Read and Write 100MB/s (PATA) Max. Sequential (probably not more than 79 as always.... but that´s 3 times better than my crappy samsung hd....)
As we see on the forum the V1 and V2 appears to work(a bit slow around 26 MB/s) . Does anyone try the V3?
G-Monster-18" ZIF V3 SSD
Features
Non-volatile Flash Memory
Support True IDE Mode HDD Compatible
Wear Leveling technology
Low power consumption
High Reliability
BCN 13/24 bit ECC (Error Code Correction) technology
Capacity from 32GB to 128GB
Support PIO mode 0, 1, 2, 3, 4, 5 and 6
Ultra DMA 0, 1, 2, 3, 4, 5 and 6
Support SMART commend set
Support ATA security commend set
Specifications
Physical Specifications
Dimensions:
54.0mm x D: 71.0mm x H:5.0mm
Weight :
13g~25g
Input Voltage :
3.3V ± 5%
Power consumptionOperation:
200mA ~ 300mA (Typical)
Standby: 3mA ~ 5mA (Typical)
Connector :
40 pin ZIF FPC Connector
Capacity :
32GB , 64GB & 128GB
High Performance
Transfer Modes
PIO mode 0~6, UDMA mode 0~6
Support NAND Flash
Both SLC & MLC flash supported
Performance
****************************************
Read : 100MB/s (PATA) Max. Sequential Read
Write : 100MB/s (PATA) Max. Sequential Write
****************************************
more info: http://www.photofast.tw/2009ENG/products/ssd-18zifv3.html
It appears to be as fast as the Mtron and others that doesn´t work, it use an indilix controller. If this works, and speedy as the specs said, it could be a good choice. Read and Write 100MB/s (PATA) Max. Sequential (probably not more than 79 as always.... but that´s 3 times better than my crappy samsung hd....)
As we see on the forum the V1 and V2 appears to work(a bit slow around 26 MB/s) . Does anyone try the V3?
G-Monster-18" ZIF V3 SSD
Features
Non-volatile Flash Memory
Support True IDE Mode HDD Compatible
Wear Leveling technology
Low power consumption
High Reliability
BCN 13/24 bit ECC (Error Code Correction) technology
Capacity from 32GB to 128GB
Support PIO mode 0, 1, 2, 3, 4, 5 and 6
Ultra DMA 0, 1, 2, 3, 4, 5 and 6
Support SMART commend set
Support ATA security commend set
Specifications
Physical Specifications
Dimensions:
54.0mm x D: 71.0mm x H:5.0mm
Weight :
13g~25g
Input Voltage :
3.3V ± 5%
Power consumptionOperation:
200mA ~ 300mA (Typical)
Standby: 3mA ~ 5mA (Typical)
Connector :
40 pin ZIF FPC Connector
Capacity :
32GB , 64GB & 128GB
High Performance
Transfer Modes
PIO mode 0~6, UDMA mode 0~6
Support NAND Flash
Both SLC & MLC flash supported
Performance
****************************************
Read : 100MB/s (PATA) Max. Sequential Read
Write : 100MB/s (PATA) Max. Sequential Write
****************************************
more info: http://www.photofast.tw/2009ENG/products/ssd-18zifv3.html