Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

nMP D300 is V7900?

Bazu said:
Hi,

Digging a bit in ATI's FirePro specs. Found that D300 could be the old V7900 not W7000.

http://www.amd.com/US/PRODUCTS/WORKSTATION/GRAPHICS/ATI-FIREPRO-3D/V7900/Pages/v7900.aspx#4

All specs match with data on Apple's website.
1280 streams, 2GB DD5, Bandwidth 160GB/s.

That is quite old card :(
Click to expand...


Not all the specs match up.
The computational float level is not: 2TFLOPs. ( W7000 is 2.4TFLOPs. Underclock it a bit back to 2TFLOPs is far more likely than trying to overclock th eV7900 which comes up short at 1.8 ).

Likewise would be a rather dubious move to kneecap themselves with a PCI-e v2.0 card when a bit constrained on PCI-e v3.0 lanes. Better to have twice the bandwidth with that limited budget than any "el cheapo" move of building a custom graphics card around a over 2 year card based on previous generation GPU microarchitecture. AMD is on GCN (graphics core next). The D500 and D700 almost certainly are based on GCN. It would be an extremely odd duck not to use the same technology to provide better graphics and OpenCL preformance at lower TDP.
 
Bazu said:
Hi,

Digging a bit in ATI's FirePro specs. Found that D300 could be the old V7900 not W7000.

http://www.amd.com/US/PRODUCTS/WORKSTATION/GRAPHICS/ATI-FIREPRO-3D/V7900/Pages/v7900.aspx#4

All specs match with data on Apple's website.
1280 streams, 2GB DD5, Bandwidth 160GB/s.

That is quite old card :(
Click to expand...

No 4K support disqualifies it. It's almost certainly a Pitcairn XT part on the latest 28nm silicon supporting PCIe 3.0. In fact, I think someone confirmed that a Pitcairn XT card was recognized in Mavericks as a D300.
 
deconstruct60 said:
Not all the specs match up.
The computational float level is not: 2TFLOPs. ( W7000 is 2.4TFLOPs. Underclock it a bit back to 2TFLOPs is far more likely than trying to overclock th eV7900 which comes up short at 1.8 ).

Likewise would be a rather dubious move to kneecap themselves with a PCI-e v2.0 card when a bit constrained on PCI-e v3.0 lanes. Better to have twice the bandwidth with that limited budget than any "el cheapo" move of building a custom graphics card around a over 2 year card based on previous generation GPU microarchitecture. AMD is on GCN (graphics core next). The D500 and D700 almost certainly are based on GCN. It would be an extremely odd duck not to use the same technology to provide better graphics and OpenCL preformance at lower TDP.
Click to expand...

VirtualRain said:
No 4K support disqualifies it. It's almost certainly a Pitcairn XT part on the latest 28nm silicon supporting PCIe 3.0. In fact, I think someone confirmed that a Pitcairn XT card was recognized in Mavericks as a D300.
Click to expand...

Thanks for answers! :)
 
V7900

Sorry to ask, but I'm new to the Mac world. I was wondering if a AMD FirePro V7900 would work in a Mac Pro. Does anyone know if it will out of the box, or if it can be flashed?
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back