Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Thanks... I wanted low profile XLR's so I can leave them connected without cables showing. They are expensive pre-made... and not at the lengths I need, so I made mine. The XLR connectors are by "Cable Techniques"... bought from B&H.
Excellent job!
Those are pricey, $70 for a 25" which I would need 😱 Wish I knew how to soldering
 
I had a front drivers side brake calliper failure this week on my Audi, needed new calliper, set of front pads and a flexi hose. Not the best start to the week either lol.
Well they needed doing, especially with winter coming. It just got through its first MOT, but literally measured 1.6mm.
At least the fronts and brakes have plenty of meat on them.
 
A hand made and made to order pair of Ernest Wright scissors, made in Sheffield which I ordered a few months ago and collected from their factory yesterday..


IMG_8236.JPG
 
Would you be able to get a different size rim?
Not easily. The 20” rims are narrow. But wider than the i3. This has improved the ride (as well as some other suspension changes BMW did). Putting wider wheels would increase drag and reduce range.
I’m fairly sure they were the original tyres. So if I get three years out of them it’s not too bad.
 
2 x new rear tyres for my BMW i3s.

You don’t want to know how much they cost!
View attachment 2298512
Well, anything of that sort from BMW is going to be expensive, sometimes wildly so.

Safet travels with your new tyres.
A hand made and made to order pair of Ernest Wright scissors, made in Sheffield which I ordered a few months ago and collected from their factory yesterday..


View attachment 2298641
Ooooh.

Gorgeous.

Well wear.
 
Finally tried out my Chord Mojo2 DAC/Amp (recently purchased). This little, battery operated DAC/Amp. even drives my Audeze LCD-2 headphones! I plan to use it mostly for travel with my Sennheiser IE 600 in ear wired headphones/Dan Clark Aeon 2 Noir.

The Mojo2 can also be used as a desktop headphone DAC/Amp. with a computer. The Chord2 has certainly captured my heart!

PS I this very mobile rig even works with high rez music from Quobuz music service.

DSCF1467.jpeg
 
AL-4L-V2.0_N305_PWR-PORT-side.jpgAL-4L-V2.0_N305_LAN-PORT-side.jpgAL-4L-V2.0_N305_populated.jpg

Chang Wang mini-pc (ordered direct from China, via cwwk dot net).

Alder Lake i3-n305 (8-core Gracemont 'Efficiency'; 8-thread) CPU.

Four Intel i226-V 2.5G LAN ports.

1-channel/slot DDR5 RAM (specs state 16GB max, but 48GB Crucial register&populate, and is quite performant (if 64GB SODIMM modules existed, I would bet that they would register&populate, also)).

Dual NVME (PCIe X4/PCIe x1). I used on-shelf Inland's for initial testing, but have since moved to two SK Hynix P31 Gold gumsticks . . . 1TB + 2TB

Multiple USB portage (2.0 480Mx6, and 3.0 10000Mx2).

This will soon serve *cough* as a ProxMox headless node ;)
 
Bought a few Panasonic Eneloop AA batteries... with the Panasonic BQ-CC65 charger... to use with my Sennheiser Instrument and IEM wireless systems that I posted previously...

ewdeneloop.jpg
 
  • Like
Reactions: jazz1
Great price! Great lens! I have a good time with it on my XPro3 for street photography!

loving it already. In fact I’m one of the few that really likes shooting with the 18mm F2 lens but the grinding noise while focusing gets on my nerves and I think 23mm is a nice length between that at the 27mm. This lens is sharp and silent :)
 
Last edited:
  • Like
Reactions: jazz1
A hand made and made to order pair of Ernest Wright scissors, made in Sheffield which I ordered a few months ago and collected from their factory yesterday..


View attachment 2298641
Not trying to be a dick, just genuinely curious, is collecting scissors a thing? I've never seen that before. Honestly, I didn't even know you could get scissors hand made like that.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.