Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

PowerMac G5

macrumors newbie
Original poster
May 30, 2016
26
1
Australia
I have a dead PowerMac G5 that appears to have a BGA RAM Slot failure, I have heard that some people have had success using a heatgun or an oven to rejoin the solder joint. Has anyone had any success (or failures) attempting to do this.

When I turn on my PowerMac I don't get the 3 flashing lights.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.