Pro won't boot after Bootcamp

[Mileham]

(It is a 2006 with 2,1 firmware upgrade) Tried installing Windows 7 64bit with Bootcamp, on a separate drive in bay 2. Bootcamp labeled this one /Volumes/BOOTCAMP.

Bootcamp downloaded the support files to a USB stick, no problem. When the choice was presented which drive to use for Windows, I chose the drive in bay 2, as labeled above. After 'Continue' the machine shut off and could not restart properly -- 'No boot device' error message. Pressing a key did nothing.

Tried restarting and pressing D for a hardware test. Nothing. Tried accessing Open Firmware. Also nothing. Put a bootable DVD in an external drive and held down the C key. Again nothing. No keys respond on startup.

I held down the power button while starting up, hoping to use a firmware restoration disc that I have . LED flashed quickly several times (more than 3 for sure), then a long tone sounded, but the internal tray never opened.

I'm concluding that I fried the firmware somehow and the logic board is toast. If not, anything else I should try?

 

[hfg]

Do a PRAM and SMC reset ... and try again.

https://support.apple.com/en-us/HT204063
https://support.apple.com/en-us/HT201295

http://www.macworld.com/article/2881177/how-to-reset-your-macs-nvram-pram-and-smc.html

 

[h9826790]

Just do a PRAM reset, then your Mac should boot back to OSX.

 

[Mileham]

Do a PRAM and SMC reset ... and try again.

https://support.apple.com/en-us/HT204063
https://support.apple.com/en-us/HT201295

http://www.macworld.com/article/2881177/how-to-reset-your-macs-nvram-pram-and-smc.html

Thanks, I reset NVRAM from the first link, and was able to boot back into OS X.
[doublepost=1484459839][/doublepost]

Just do a PRAM reset, then your Mac should boot back to OSX.

Thank you.