Hi,
first to all i would apologize for my bad english.
So, i have a MBP mid 2009 with some upgrade:
intel core duo 2.66 ghz
8 gb ram
ssd crucial 256GB
HD 320 gb
Nvidia 9400&9600gt
I want install windows to use some CAD-3D program.
A few years ago i had installed Windows 7 Enterprise 64 bit through Bootcamp&Snow Leopard.
Now i have El Capitan with Bootcamp 6 and i have a lot of problem with the procedure.
The problem is that after creating the partition through Bootcamp, the MB restarts in a black screen and the installer of windows doesn't start.
I tried all the possibile solutions that i found
1st
I tried an usb installation without DVD-lector,changing the file .plist in bootcamp. The system recognize the bootable usb but the installation doesn't start
2nd
I installed rEFIt in a usb storage and i tried to boot the USB pen without success
3rd
I tried to create a virtual machines e save it as a bootcamp backup,restored then in the bootcamp partition through WinClone
I used Fusion and Virtualbox,but without success. The screen at the start remains black after choose bootcamp partition
4th
I reassembled the DVD-lector in MBP and i tried to install Windows through the standard solution. Here arrives the funny.
I have the ISO of windows 7,windows 8.1 and windows 10:all versions are 64 bit.
I manage to install windows 10 with success but my macbook doesn't support it at 100%:the system doesn't recognize Nvidia 9400&9600gt and some other drivers(i tried to install them manually without success)
So i remove Windows 10 and i tried Windows 7,100% supported by my MBP.
I tried different isos(Ultimate and enterprise) but all give me the same problem.
When the system restarts after creating the Bootcamp's partition,the screen becomes black and the installation doesn't start.
The situation doesn't change if i manually choose the boot disk(Windows or Efit Boot indifferently),pushing the option key.
After windows 10 install i can choose "Efi Boot":if i choose it, a light-blue screen tell me that the system must be restored but i don't do nothing.
Clarification: all the iso and dvd run correctly . I tried them into several virtual machines.
No external devices were connected through USB
I'm really depressed
EDIT: i probably wrong section. Sorry
first to all i would apologize for my bad english.
So, i have a MBP mid 2009 with some upgrade:
intel core duo 2.66 ghz
8 gb ram
ssd crucial 256GB
HD 320 gb
Nvidia 9400&9600gt
I want install windows to use some CAD-3D program.
A few years ago i had installed Windows 7 Enterprise 64 bit through Bootcamp&Snow Leopard.
Now i have El Capitan with Bootcamp 6 and i have a lot of problem with the procedure.
The problem is that after creating the partition through Bootcamp, the MB restarts in a black screen and the installer of windows doesn't start.
I tried all the possibile solutions that i found
1st
I tried an usb installation without DVD-lector,changing the file .plist in bootcamp. The system recognize the bootable usb but the installation doesn't start
2nd
I installed rEFIt in a usb storage and i tried to boot the USB pen without success
3rd
I tried to create a virtual machines e save it as a bootcamp backup,restored then in the bootcamp partition through WinClone
I used Fusion and Virtualbox,but without success. The screen at the start remains black after choose bootcamp partition
4th
I reassembled the DVD-lector in MBP and i tried to install Windows through the standard solution. Here arrives the funny.
I have the ISO of windows 7,windows 8.1 and windows 10:all versions are 64 bit.
I manage to install windows 10 with success but my macbook doesn't support it at 100%:the system doesn't recognize Nvidia 9400&9600gt and some other drivers(i tried to install them manually without success)
So i remove Windows 10 and i tried Windows 7,100% supported by my MBP.
I tried different isos(Ultimate and enterprise) but all give me the same problem.
When the system restarts after creating the Bootcamp's partition,the screen becomes black and the installation doesn't start.
The situation doesn't change if i manually choose the boot disk(Windows or Efit Boot indifferently),pushing the option key.
After windows 10 install i can choose "Efi Boot":if i choose it, a light-blue screen tell me that the system must be restored but i don't do nothing.
Clarification: all the iso and dvd run correctly . I tried them into several virtual machines.
No external devices were connected through USB
I'm really depressed
EDIT: i probably wrong section. Sorry