Really need help with Iphone XS Boot loop.

[Just.francits]

So i have iphone XS and i updated ios to 16.1.1 and everything seemed fine. Then the next day my internet wasnt working like if there wasnt wifi/mobile data module in the phone. So i restarted it and it got in boot loop. I tried all the solutions in YouTube. I got in recovery mode and tried to update/ restore it but i get iTunes error 4013 and i also tried to go in DFU mode and restore it with downloaded signed ios but I again get the error 4013. I have the newest iTunes and all. Please help me guys.

 

[Lekro]

Your phone needs a front sensor flex cable replacement. 4013 and boot loop is a sure symptom of that cable is damaged.

 

[Just.francits]

Okay, but how did it broke? The phone wasnt falling or getting any water. It was working fine, but the wifi was missing the last day. Hardware couldnt break from one restart. Is there a way i can atleast turn it on? With the broken sensor. I have tried all 3uTools options and none of them work. They all stop on sending KernelCache.

Your phone needs a front sensor flex cable replacement. 4013 and boot loop is a sure symptom of that cable is damaged

 

[Lekro]

The X and the XS has a design problem with this cable. The way it is bent in shape to fit in the phone often gives in overtime. I've also seen it many times bent incorrectly (forced) as the way it came from the factory. The only way to boot up your phone without repairing it is to disconnect that cable. You will not have earspeaker, proximity sensor, ambient light sensor and Face ID function for that time.

This is the one I am talking about:

https://guide-images.cdn.ifixit.com/igi/VfJmQ2o6MWIwj2rH.huge

And it breaks usually here (where you can see the 90° angle in the flex cable in the upper section):

https://guide-images.cdn.ifixit.com/igi/NJPdFYTHitL2hafV.huge

You can see here how it is bent:

https://guide-images.cdn.ifixit.com/igi/ryfagYOqsXowIIsl.huge

That 90° angle sits here in this space on the earspeaker:

https://guide-images.cdn.ifixit.com/igi/FUvNwySgPhymYqtR.huge

If the cable is bent incorrectly, it can get stuck between the battery and the screen and there is not enough room for it there, so the traces inside the flex cable will break overtime.