Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

MotionManSF

macrumors newbie
Original poster
Jul 15, 2020
24
12
I currently have a Sapphire Radeon RX 580 8 GB PCIe GPU in my 2010 5,1.

I also have a ATI Radeon 5770 1GB.

I would like to have both installed and working, but I have, thus far, been unsuccessful.

The 580 is powered by a dual mini-6-pin to 8-pin. The 5770 is powered from a drive bay SATA cable (SATA to 6-pin).

When I have them both installed, I get no video from the 580 and just a boot screen with the apple and progress bar that stops halfway (for hours before I give up) on the 5770.

What am I missing? Any thoughts?

Thanks.

MotionMan

81aQTxxcCJL._AC_SL1500_.jpg 61jQV+UBboL._AC_SL1000_.jpg
 

MotionManSF

macrumors newbie
Original poster
Jul 15, 2020
24
12
I just learned that, apparently, multiple GPUs of different makes/models does not work past High Sierra on the 5,1's.

Bummer.

MotionMan
 

MarkC426

macrumors 68040
May 14, 2008
3,700
2,097
UK
It is because one is metal, one is not.
Why do you want the 5770 in there anyway.
 

MotionManSF

macrumors newbie
Original poster
Jul 15, 2020
24
12
OpenCore or the recently updated rEFInd work with a RX 580 for pre-boot configuration support.

For whatever reason, I am trying to avoid boot managers. I am looking into flashing the 580, so this may be becoming more of an academic exercise (which, apparently, has run into a huge roadblock).

MotionMan
 

MIKX

macrumors 68000
Dec 16, 2004
1,815
691
Japan
Boot screen.

MotionMan
AND HD7950 and HD 7970 can both be EFI flashed for bootscreensand are both Metal.

The HD 7970 is not so far behind the RX 580 - I have an EFI FLASHED SAPPHIRE DUAL-X 3 GB = Nice, strong, reliable card.,
 

Omedus

macrumors newbie
Jul 27, 2020
8
0
I have an install question. I just got rx 580 installed - 2 six pin it lights blue. But no hdmi. My drive already had Mojave. Is there anything I need to do?
 

MarkC426

macrumors 68040
May 14, 2008
3,700
2,097
UK
Have you tried display port.
Which rx580 is it?
Does it have two 6 pin connectors.

edit: sorry should be one 8 pin on the gpu.
 
Last edited:

Omedus

macrumors newbie
Jul 27, 2020
8
0
Yes, 2 six pin cables. I only have hdmi no display port. Wondering is the firmware/Mojave issue
 

Omedus

macrumors newbie
Jul 27, 2020
8
0
Sounds right, 6-8 pin. I had to get a second cable. I did get a red light at first then after properly connecting I get blue.
 

tsialex

Contributor
Jun 13, 2016
13,455
13,602
Sounds right, 6-8 pin. I had to get a second cable. I did get a red light at first then after properly connecting I get blue.
You can't power a 6+8 card from just the backplane PCIe AUX connectors, unless your card is one that can be connected to an eVGA PowerLink.

There is not enough power, the workaround is to use the PowerLink to balance the power draw equally from the two backplane connections or get 6-pin powered from two of the SATA power connections.
 
  • Like
Reactions: MarkC426

Omedus

macrumors newbie
Jul 27, 2020
8
0
I may have misunderstood, I connected two 6 pin cables to the back. I’m wondering if issue is Mojave/firmware. I installed a cloned ssd with Mojave. There is talk of H Sierra
 

tsialex

Contributor
Jun 13, 2016
13,455
13,602
I may have misunderstood, I connected two 6 pin cables to the back. I’m wondering if issue is Mojave/firmware. I installed a cloned ssd with Mojave. There is talk of H Sierra
You have to first power the GPU correctly. A 6-pin cable on a 8-pin receptacle will not work, a 6-pin to 8-pin cable will damage the backplane.

Second, do a clean install of High Sierra with your AppleOEM GPU, don't use patched/hacked installs, check the BootROM release and if needed upgrade to the current High Sierra release MP51.0089.B00.

After you get your GPU working with 10.13.6 then you start with Mojave.

 
  • Like
Reactions: Wernerempire

Sean__Wong

macrumors member
Oct 17, 2018
74
26
Good morning MacRumours Hive brain.

I'm looking for an alternative for my Sapphire Pulse RX580 to act as a standby 'spare' in case my Sapphire unit gets fried in my TB3 USB recabling project.

any one tried this Gigabyte RX580?
It has a nice 3 x DP1.4 outputs compred to the Sapphire Pulse RX580

 
Last edited:
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.