Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Tried to update to iOS 5.1 - "the iphone could not be restored unknown error occurred
- Thread starter gotanimac
- Start date
- Sort by reaction score
I did - I didn't find any relevant information.
Phone is not jailbroken. I tried different USB ports.
Saying "you couldn't have done a search" is not helpful. I wouldn't have posted if I had searched and found the information I needed.
Phone is not jailbroken. I tried different USB ports.
Saying "you couldn't have done a search" is not helpful. I wouldn't have posted if I had searched and found the information I needed.
You're kidding me right? There's 5+ threads RIGHT NOW asking the exact same question.
Obviously you did not search even a little bit so you deserve no help. There have been over 11 answers in the 5+ threads explaining why this is happening.
https://forums.macrumors.com/threads/1335629/
https://forums.macrumors.com/threads/1336150/
https://forums.macrumors.com/threads/1336155/
https://forums.macrumors.com/threads/1335872/
https://forums.macrumors.com/threads/1335672/
And that's only HALF way through the first page of Threads in this sub forum. You can't be that blind.
https://forums.macrumors.com/threads/1336150/
https://forums.macrumors.com/threads/1336155/
https://forums.macrumors.com/threads/1335872/
https://forums.macrumors.com/threads/1335672/
And that's only HALF way through the first page of Threads in this sub forum. You can't be that blind.
That is not the error I'm getting. I downloaded the update just fine... but now it won't even turn on it gives me an itunes logo and usb cable. Attempting a restore I just get the error I wrote in my OP.
Nothing in those threads have anything to do with my original error. I could be mistaken as I'm not too savy on this but the update downloaded...
Tried update from the wi-fi and it failed so that's when I tried to do it from iTunes and still no go. It downloads and starts to install but after I get that error and the screen shows an iTunes logo and USB cable.
I also have Verizon iPhone 4.
I'm in DFU mode right now and attempting to restore from the iPhone3,3_5.1_9B176_Restore.ipsw file provided @ http://ios.e-lite.org/.
I'll let you know how it goes.
Edit: Still a no-go. Absolutely pathetic. I have an appointment at the Genius bar this afternoon, at least I will get to leave work early. I'll update this thread to let people know what happened... and also let our resident dbag learn too.
I'm in DFU mode right now and attempting to restore from the iPhone3,3_5.1_9B176_Restore.ipsw file provided @ http://ios.e-lite.org/.
I'll let you know how it goes.
Edit: Still a no-go. Absolutely pathetic. I have an appointment at the Genius bar this afternoon, at least I will get to leave work early. I'll update this thread to let people know what happened... and also let our resident dbag learn too.
Last edited:
The iTunes logo and USB cable is telling you to plug into iTunes. Try that and see iTunes needs to restore something. You will likely get a message from iTunes when you connect telling you what's going on. Worth a try.
EDIT: Be sure to update your iTunes before doing this. iTunes also has an update to make it compatible with the 5.1.
When connected to Itunes, it stated that it has detected a device in Recovery mode, that it needs to be restored. Once you hit restore, it downloads software, then error pops up again.
EDIT: I did update her Itunes prior to updating
EDIT: I did update her Itunes prior to updating
Last edited:
Yeah - last night I originally did it OTA @home connected to wi-fi. Once it failed and simple had that cable logo I did connect it to my iMac and tried again... where it again failed.
I'm wondering if this is a version 4 Verizon issue since another poster is having the same issue.
I just installed iTunes on my work PC and tried again. Same deal.
Same Problem Here
Any update? I update through wifi, phone went to connect to itunes screen, go through restore, get unknown error occurred (1) message and have tried all 5 suggestions in the "resolving update issues" page from Apple. I also have a Verizon iPhone 4.
Any update? I update through wifi, phone went to connect to itunes screen, go through restore, get unknown error occurred (1) message and have tried all 5 suggestions in the "resolving update issues" page from Apple. I also have a Verizon iPhone 4.
I don't know if this will help, but when an update or restore involves iTunes, I have to use my laptop iTunes, which is NOT the regular iTunes.
I cannot sync to the laptop because there is nothing stored there. BUT, it's the only way I can do a restore using iTunes backups. Once the restore is complete, I do a sync with my desktop iTunes - the one I usually use.
If I restore using my regular iTunes on my desktop computer, I get error messages deluxe. Never, never works.
Others have had the same experience - where you have to use a different computer to update or restore and then sync with the normal iTunes. Go figure.
I cannot sync to the laptop because there is nothing stored there. BUT, it's the only way I can do a restore using iTunes backups. Once the restore is complete, I do a sync with my desktop iTunes - the one I usually use.
If I restore using my regular iTunes on my desktop computer, I get error messages deluxe. Never, never works.
Others have had the same experience - where you have to use a different computer to update or restore and then sync with the normal iTunes. Go figure.
They told me at the Genius bar that it was due to water damage. This pissed me off because it was working fine.
I had to pay $150 for a new one.
Came home. 5.1 installed fine on the new phone, so who knows. [The update failed on both my home iMac and my work Windows XP pc).
It just seems weird to me that the phone would work fine but then fail once you update it.
I would have used my SquareTrade warranty but I need a phone because I'm leaving out of town tomorrow and I would be phoneless for over a week.
I had to pay $150 for a new one.
Came home. 5.1 installed fine on the new phone, so who knows. [The update failed on both my home iMac and my work Windows XP pc).
It just seems weird to me that the phone would work fine but then fail once you update it.
I would have used my SquareTrade warranty but I need a phone because I'm leaving out of town tomorrow and I would be phoneless for over a week.
Same Problem Here
Saturday's iPhone 4 OTA update to 5.1 resulted in the dreaded "plug me into iTunes" graphic on the phone. After numerous attempts to download and install through iTunes, all failed. Repeatedly crashed at the "updating firmware" screen producing the unknown error (1) message. Verizon no help. A trip to the Apple Store revealed a somewhat rare but "acknowledged problem" that the firmware had become corrputed. Update not possible and that the phone was bricked. Apple replaced phone with a new unit - no questions asked. All data then successfully restored from iCloud from previous day backup (whew). Good outcome but 4+ hrs of my life I will never get back...
Saturday's iPhone 4 OTA update to 5.1 resulted in the dreaded "plug me into iTunes" graphic on the phone. After numerous attempts to download and install through iTunes, all failed. Repeatedly crashed at the "updating firmware" screen producing the unknown error (1) message. Verizon no help. A trip to the Apple Store revealed a somewhat rare but "acknowledged problem" that the firmware had become corrputed. Update not possible and that the phone was bricked. Apple replaced phone with a new unit - no questions asked. All data then successfully restored from iCloud from previous day backup (whew). Good outcome but 4+ hrs of my life I will never get back...
the iphone could not be restored. An unknown error occurred 3014
Try plugging your phone into a different USB port. That worked for me. I was getting the error (3014) at first than (-1) error. I plug my phone into a different USB port and it worked great.
Try plugging your phone into a different USB port. That worked for me. I was getting the error (3014) at first than (-1) error. I plug my phone into a different USB port and it worked great.
Sounds like my problem
my error code is 1611 and I checked their advanced help and tried those also and now my phone wont come on even after attaching to cord.
my error code is 1611 and I checked their advanced help and tried those also and now my phone wont come on even after attaching to cord.