I just got a MacBook Pro today after years of Windows experience. Since I have lots of Windows software that I need for professional purposes, I bought a machine with XP installed (but no installation CD) on a Boot Camp partition. I need to run MacOS X and XP synchronously, so I thought I'd install VMFusion. Once my VMFusion installation was complete, I got a number of messages telling me to install the tools from the VM Machine. Unfortunately, I don't see any way to do this. So, my two questions are: can I install VMFusion AFTER XP and Boot Camp have already been installed? And, if so, what, specifically should I do to get the VMFusion tools installed? Reinstalling WIndows doesn't seem to be an option since my version of XP came installed on the machine.
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
VMFusion installed after Windows XP already resided on machine
- Thread starter beryl
- Start date
- Sort by reaction score
You can install VMware after the bootcamp partition is installed. When you run VMware it will show the bootcamp partition as one of its vitural machines (probably the only one). Once you have started up your bootcamp XP from within VMware go to the VMware OSX menu at the top and select Install VMware tools from the Virtual Machine menu item. It has to be installed while the VM is running.
PS If you don't have the Windows system disk then repairs/reinstalls can be a problem. I would suggest you get a copy of Winclone and clone your Windows partition so that you can restore it if a problem occurs.
PS If you don't have the Windows system disk then repairs/reinstalls can be a problem. I would suggest you get a copy of Winclone and clone your Windows partition so that you can restore it if a problem occurs.
According to VMWare you should install Fusion after XP is installed and activated in the Bootcamp partition. I am about to go through the same thing, so I hope I get it right. I want to keep the requited number of activations to a minimum. According to my Fusion manual, the correct order is:
1. Install XP via Bootcamp
2. Activate XP in Bootcamp
3. Install Fusion
4. Activate XP in Fusion
The manual says that if you follow this sequence you won't need to activate again, but I have read numerous reports of people getting into an activation loop where whenever they boot the other flavor of XP (Bootcamp then Fusion or Fusion then Bootcamp) they are asked to activate all over again. I really don't want to get into this situation.
1. Install XP via Bootcamp
2. Activate XP in Bootcamp
3. Install Fusion
4. Activate XP in Fusion
The manual says that if you follow this sequence you won't need to activate again, but I have read numerous reports of people getting into an activation loop where whenever they boot the other flavor of XP (Bootcamp then Fusion or Fusion then Bootcamp) they are asked to activate all over again. I really don't want to get into this situation.
Don't forget, in order to actually install the tools once you're booted into Windows, double click on the virtual CD drive in My Computer. Doesn't always start, even if you have Autorun enabled. Learned that the hard way.
I don't see how Fusions can say that. Once you activate in BC then run Fusions, Windows will see that all of the hardware has changed (because things like video cards are now running in virtual mode) and you will be asked to activate again. It's not really a big deal (I had to do it when I ran Parallels). When you try to activate it will tell you that you have already done so and you will be presented with two options, one to call an 800 number where it will guide you through the procedure with prompts and the other to talk to a MS rep. I did the latter and told them I was reinstalling after a HD failure and they gave me a new activation key.
And it's not really an "activation loop" you only do it once.
Alan
MacInstruct Says Opposite
MacInstruct says install VMFusion first then XP.
As someone who understands none of this, does anyone know the real story?
Does anyone have instructions step by step on how and what to do so I can install XP on my new Macbook Pro? What setting changes need to be made etc?
MacInstruct says install VMFusion first then XP.
As someone who understands none of this, does anyone know the real story?
Does anyone have instructions step by step on how and what to do so I can install XP on my new Macbook Pro? What setting changes need to be made etc?
if you want to run fusion off your bootcamp partition this is the process
1 activate windows in bootcamp
2 install fusion
3 boot,bootcamp volume under fusion
4 install tools
5 reboot the VM
6 activate windows under fusion
Ok
As advised by Mac Instruct I had install VM Fusion.
So therefore I need to uninstall Vm fusion using Appdelete. Then Install bootcamp & set up partition. then install XP. the VM fusion. Is this correct?
Will I need to change any settings anywhere so I have no conflicts? i heard something about CD conflicts. I really have no idea about anything on Mac yet. i just got Mac Pro last week. Still learning my way.
As advised by Mac Instruct I had install VM Fusion.
So therefore I need to uninstall Vm fusion using Appdelete. Then Install bootcamp & set up partition. then install XP. the VM fusion. Is this correct?
Will I need to change any settings anywhere so I have no conflicts? i heard something about CD conflicts. I really have no idea about anything on Mac yet. i just got Mac Pro last week. Still learning my way.
I think you will also need to delete Library->Application Support->VMWare (or something like that). I did it before but forgot exactly the directory name; just do a search for VMWare or Fusion in both Library->Application Support and Users->YourUserName->Library->Application Support.
danny w's advice is good
Nope you don't need to change any settings once you have un-installed fusion just re-install & follow the steps i posted,not sure what conflicts your talking about can you be more specific ?
Are OK,another user posted that method & other members posted back it didn't work,i just looked for the thread and cant find it,but what i do know is the method i posted is tryed & tested by god know's how many users on here and works ( myself included god know's how many times as ive had fusion installed for about 1 1/2 yrs now )
I would run it off bootcamp that way you will always have the advantage of running M$ at native speed when you reboot into windows
XP & VMFusion
I had the Boot Camp installation before I decided to install VMWare, and as I recall it ran off of the original installation without having to validate the Windows installation again. However, after about 3 months of running VM, I decided to upgrade my HD and took that opportunity to dump my Boot Camp install as I found that I never ran Boot Camp any more. This got rid of the special partition for Boot Camp and freed up some drive space. I have obtained new serials for the XP install 5 times now, due to adding hardware to my Mac. I don't know why MS even bothers, you just state that you have changed hardware (video card, memory, HDs) or had to do a fresh reinstall due to a virus or spyware and they issue a new number.
You cannot use the CD/DVD drive in Windows and use it in your Mac environment at the same time, there is an icon at the lower right edge of the VM window that allows you to enable or disable the CD/DVD drive access from the Virtual Machine. I spent a few frantic minutes once thinking that my SuperDrive was hosed when it just needed to be released from use in the Windows environment.
I had the Boot Camp installation before I decided to install VMWare, and as I recall it ran off of the original installation without having to validate the Windows installation again. However, after about 3 months of running VM, I decided to upgrade my HD and took that opportunity to dump my Boot Camp install as I found that I never ran Boot Camp any more. This got rid of the special partition for Boot Camp and freed up some drive space. I have obtained new serials for the XP install 5 times now, due to adding hardware to my Mac. I don't know why MS even bothers, you just state that you have changed hardware (video card, memory, HDs) or had to do a fresh reinstall due to a virus or spyware and they issue a new number.
You cannot use the CD/DVD drive in Windows and use it in your Mac environment at the same time, there is an icon at the lower right edge of the VM window that allows you to enable or disable the CD/DVD drive access from the Virtual Machine. I spent a few frantic minutes once thinking that my SuperDrive was hosed when it just needed to be released from use in the Windows environment.