Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

firmware update

  1. S

    MP 6,1 Monterey + Yosemite Dual Boot on Mac Pro (Late 2013)

    I'm currently running a late 2013 Mac Pro that I've been holding back on upgrading. My 1TB Apple SSD is split into two HFS+ partitions, one Yosemite and one High Sierra. I'd like to reformat the High Sierra partition as APFS and install Monterey on it, while keeping the Yosemite partition intact...
  2. S

    AirPods Pro 2 ANC performance after updating to 5E135.

    Hello, I've been using AirPods Pro 2 since last November and have been really satisfied with the performance of the ANC. But all this changed since the update from yesterday. I first noticed it in my office today. There is an AC that produces a bit of low rumble which my AirPods had no trouble...
  3. A

    MP 1,1-5,1 Firmware update and going backwards

    Hi all, I am doing tests with my new video card. I created a new drive for all this to keep me original drive intact. It requires that I move to high sierra. I am presently at El Capitan. It also requires that I do firmware updates, both for High Sierra as well as Mojave. If I do these firmware...
  4. P

    How do I manually update the firmware on my 2013 MacBook Pro?

    So I bought a Late 2013 MacBook Pro 15" dual graphics a few years back with no SSD. I think got an adapter and used my own NVME SSD. Since I updated to Big Sur, the firmware had not been updated. Still have the old bong and the old-style boot menu. System report says "System Firmware Version...
  5. tinygoblin

    macOS Big Sur 11.6.3 or 11.6.4 install.log of T2-equipped Intel Mac?

    Hello, I'm trying to figure out how to update EFI firmware (BootROM, iBridge) of my T2 Intel Mac without updating macOS. This cannot be done using regular Terminal methods (efiupdater and eficheck Terminal tools do not support T2-equipped Intel Macs). According to this article firmware on all...
  6. tinygoblin

    Updating T2-equipped Intel MacBook Pro EFI Firmware (BootROM)

    Hello, Is there some way to update EFI firmware (BootROM & iBridge) without updating macOS Big Sur or macOS Monterey on an Intel Mac with T2 chip? Mac is capable of running macOS Catalina. I have already tried installing FirmwareUpdate.pkg using a well-known method by Pepijn Bruienne. That PKG...
  7. A

    MP 1,1-5,1 Firmware version Mac Pro 5,1 suitable for NVMe ssd?

    Hi, My firmware version seems to be: 9144.0.7.4.0 Is this ok for a bootable nvme.m2 ssd card?
  8. R

    HELP PLEASE! Upgrading OS from El Capitan to High Sierra

    Hi all, I have searched google, dosdude and where ever possible online but to no solution so any help would be great. I have recently acquired Mac Pro 5.1, which has El Capitan 10.11.6 as an OS. I am trying to upgrade the OS to High Sierra but having no luck. I keep getting the High Sierra...
  9. T

    MP 1,1-5,1 Mac Pro 3.1 FirmWare upgrade to 7.1

    Hello, recently I bought a Mac Pro 3.1 2008. I’m not using it for something super intensive. I uust wanned to have a Mac for cheap. I’ve had in plan, to use some DosDude patchers to upgrade the Mac to macOS Big Sur. But unfortionetly, DosDude didn’t do a patcher for macOS 11. So I tried using...
  10. ccrivia13

    MP 1,1-5,1 Mac Pro painfully slow after firmware upgrade 4,1 to 5,1

    I’ve successfully upgraded the firmware on my 4,1 Mac Pro to a 5,1 (now officially running High Sierra). Everything worked perfectly fine until I enabled SIP again. Now everything runs painfully slow, just opening Launchpad for example takes what feels like ages. Also, if I want to open apps...
  11. flaubert

    Can't access Recovery after 5,1 upgraded to 10.14.5

    So, this is weird... my 2010 cMP 5,1 was running fine on 10.14.4 and firmware 140.0.0.0.0 until last night. Last night I finally undertook the firmware update process to 144.0.0.0.0 and the install of the full 10.14.5, no problems. At the conclusion of it all, I booted my Mac up normally and...
  12. C

    Resolved Mac Pro 1,1 Firmware upgrade issues

    Hello, I recently acquired an old Mac Pro 1,1 and have been trying to update it to version 2,1 in order to facilitate better processors, but after trying nearly everything I can think of I am still unable to perform the update. As I have done so much it will be neater if I post it in bullets...
  13. fhturner

    Quick advice: Stuck in middle of firmware update

    Could use some advice here. While I had an RX 580 handy, I thought I'd throw it in a couple of aux/utility Mac Pros and bring their firmware up to 140.0.0.0.0. On the first one, a 12-core 2.66GHz MP4,1>5,1, I observed the first attempt caused the Mojave installer to hang w/ beachball after...
  14. M

    MacPro 5,1 mid 2010 High Sierra Firmware Upgrade

    Hi, I want to run a dual boot with my old setup running Mountain Lion 10.85 and a new setup with High Sierra. I see I must update the firmware on my mid-2010 MacPro to get High Sierra to work. If I perform this firmware update and install High Sierra on a second drive will my...
  15. ATB3800

    Another Mac Pro1,1 upgrade

    So I updated my 2006 MP to dual X5355s. In the about this Mac program the system reports 2x 2.66ghz unknown as the processor. It does recognize that there are 8 cores. I’ve tried using the firmware update tool to install 2,1 firmware but haven’t had much luck. From what I’ve read I have to...
  16. RAMtheSSD

    High Sierra Firmware Update

    Does anyone have any experience with the firmware update that the High Sierra GM requires for cMPs? Anyone had anything go wrong? Problems with 4,1 -->5,1 bootrom after the firmware update?
  17. Giuanniello

    Airport Express firmware update - howto?

    As a matter of accident I saw the light on my AirportExpress blinking orange, the network is working fine, opened Airport Utility and found out there is a firmware update available but when I click on it nothing happens, it doesn't allow me to update it, how can I work around it? I don't mind...
  18. fhturner

    Mac Pro 4,1 won't wake from sleep...backplane?

    I've got a Mac Pro 2009/4,1 that I'm building up that won't successfully come out of sleep mode. It goes to sleep fine and the light pulses; when you try any method to wake it, everything clicks back on, fans spin up, but no video displays, and it no longer is reachable on the network by ping or...