Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Huge AMD GPU "Catalyst Omega" Driver Update
- Thread starter Ironjer
- Start date
- Sort by reaction score
Did you use DDU for uninstallation? You must use it.
Do you play with all in Ultra?
I'm playing BF4 with the Mantle render is working good mostly time is locked 60 fps
I think this is the best drivers for BF4.
Yet they have ECC, and 10-bit activated on the drivers. I have no frame doprs or issues at all. I already went through in length on a previous thread here about Xfire and nMP for gaming.
https://forums.macrumors.com/threads/1726373/
I also don't use Beta drivers, which might cause issues. I really don't care if the cards are Seen as 7900's as long as the performance and features of a FirePro are there.
Now they dropped the ball, and if the next driver release is the same, it'll just push me towards NVIDIA again.
I am playing in Ultra settings and sometimes it works well all the time and others not. The problem is that you MUST install the beta drivers if you want to play Dragon Age:Inquisition. If you don't, you cannot (and I don't know why).
And yes, I use Guru3D for uninstalling the drivers. I will try MSI afterburner, maybe it is the core of my problem...
By the way, if there is no driver in the future, the MacPro adventure will be ended for me and I will use combo MacBookPro-PC.
And yes, I use Guru3D for uninstalling the drivers. I will try MSI afterburner, maybe it is the core of my problem...
By the way, if there is no driver in the future, the MacPro adventure will be ended for me and I will use combo MacBookPro-PC.
Huge AMD GPU "Catalyst Omega" Driver Update
Maybe you cards are throttling make sure monitor them with MSI or GPU-Z. I would recommend you to use MacsFan.
Maybe you cards are throttling make sure monitor them with MSI or GPU-Z. I would recommend you to use MacsFan.
Last edited:
I have installed MSI Afterburner and looked at the monitoring console concerning the use of the GPU (I disabled the ULPS too). I still noticed framerate drops but the use was not strange at all : not linear but waves going from 80% to 96% on both video cards. I don't know if it is normal, I will try with other softs as you advised me.
I am encountering another issue with my computer. I have decided to activate the 10-bit-pixel option and after the reboot, I just have a black screen... What can cause this? The monitor needs specific characteristics or settings? I will try to go back to 14.9 but I am really stuck with all those stories of drivers :-/
I am encountering another issue with my computer. I have decided to activate the 10-bit-pixel option and after the reboot, I just have a black screen... What can cause this? The monitor needs specific characteristics or settings? I will try to go back to 14.9 but I am really stuck with all those stories of drivers :-/
I just rolled back to 14.9 and still have the black screen at Windows 8.1 startup. My Apple monitor is plugged with a displayport cable to the graphic card. I tried the ECC memory and had no problem (except a performance drop but it is normal because of the way the memory is used).
An idea of a solution please?
An idea of a solution please?
What would you advise me to do please in order to make the 10-bit colors working on my machine? I do not try again because I must uninstall the drivers in safe mode in order to install it again (instead of unchecking the 10-bit option, impossible with a black screen at startup...).
Thank you.
Huge AMD GPU "Catalyst Omega" Driver Update
I have a new Mac Pro 6,1 with D500s. The method described above was an unqualified success for me. I first booted into safe mode and uninstalled the drivers using the app mentioned above, restarted again, and swapped out the files in the installers as described above. The setup of the Omega drivers worked flawlessly. Upon restarting, the AMD Fire Pro Control Panel continues to work perfectly. These drivers unlocked a new resolution (1920x1080) for me to be able to play Far Cry 4. I have a 4K ASUS PQ321Q 31.5" IGZO LEDBacklit monitor. For some reason, 1080p was not a choice that was available either within Windows 8.1, or within my game. I had to choose either full 4k resolution, which was unplayable, or a much lower 1280x720 resolution. This caused too much scaling and looked not great on a 4k screen. After installing these Omega drivers, 1080p was suddenly available, and of course it looks fantastic.
In the Fire Pro Control Panel, my graphics card is now detected as an AMD Radeon HD 7800 series. However, things seem to be working very well.
Thanks for the information! I'm really pleased with this.
I have a new Mac Pro 6,1 with D500s. The method described above was an unqualified success for me. I first booted into safe mode and uninstalled the drivers using the app mentioned above, restarted again, and swapped out the files in the installers as described above. The setup of the Omega drivers worked flawlessly. Upon restarting, the AMD Fire Pro Control Panel continues to work perfectly. These drivers unlocked a new resolution (1920x1080) for me to be able to play Far Cry 4. I have a 4K ASUS PQ321Q 31.5" IGZO LEDBacklit monitor. For some reason, 1080p was not a choice that was available either within Windows 8.1, or within my game. I had to choose either full 4k resolution, which was unplayable, or a much lower 1280x720 resolution. This caused too much scaling and looked not great on a 4k screen. After installing these Omega drivers, 1080p was suddenly available, and of course it looks fantastic.
In the Fire Pro Control Panel, my graphics card is now detected as an AMD Radeon HD 7800 series. However, things seem to be working very well.
Thanks for the information! I'm really pleased with this.
Last edited:
I'd be curious why mine remained. What model Mac Pro with what GPU? Did you have FirePro control panel installed already when you did this method? I had it installed, and it may not have been removed by the uninstall tool.
Actually, I solved the issue a few minutes after my previous post and I was going to update
The problem is that the new FirePro Control Center (which should be installed with the new drivers) cannot run because of Registry remains of the old one (note: this happens although I did use the DDU - driver uninstaller).So, if the Omega drivers install successfully but the FirePro control center is unable to load, you'll have to do the following:
1. Use the driver uninstaller (DDU) to clean up everything. Reboot.
2. Go to Registry (regedit) as Administrator and remove any keys named "ATI" under Software (HKEY_CURRENT_USER > Software & HKEY_LOCAL_MACHINE > SOFTWARE). Reboot.
3. Install the Omega drivers using the workaround described above for nMP. Reboot.
The FirePro Control Panel will be installed and run as it should.
Things like these remind me why I use a Mac and OS X for everything (except some Windows-only games).
Last edited:
All of these issues with the latest BC drivers from AMD, have they been solved with the 12/16/2014 delivery of ver. 14.301?
I am currently running an older driver, but it works, and don't want to have to deal with this crap just for a few FPSes...
I am currently running an older driver, but it works, and don't want to have to deal with this crap just for a few FPSes...
Does anybody know how this work on the newest 15.4 Betadriver for GTA?
I tried to replace the same files with the files but then the installer begin to crash.
I tried to replace the same files with the files but then the installer begin to crash.
I've tried to install the 15.4 drivers on my nMP (d700) as well... but so far - no luck
I succesfully installed the first Omega drivers by following the guide posted on this thread, but I can't get newer versions to work.
Any help would be much appreciated!
I succesfully installed the first Omega drivers by following the guide posted on this thread, but I can't get newer versions to work.
Any help would be much appreciated!
I followed this guide:
https://forums.macrumors.com/threads/1866962/
Works perfect for me, be aware that it seems not to work for everybody (look further down that thread).
The guide in this thread doesn't seem to work with the new drivers, installation crashes.
I have an Mac Pro 2013 with D300 and running Win 8.1 pro in bootcamp.
GTA V were unplayable with CF before I updated drivers (a lot of pending FPS and stuttering). With CF disabled it worked fine.
Now with new drivers CF works nice and smooth, a big difference.
D300 cards is recognized as R200 after update.
Hope it helps.
https://forums.macrumors.com/threads/1866962/
Works perfect for me, be aware that it seems not to work for everybody (look further down that thread).
The guide in this thread doesn't seem to work with the new drivers, installation crashes.
I have an Mac Pro 2013 with D300 and running Win 8.1 pro in bootcamp.
GTA V were unplayable with CF before I updated drivers (a lot of pending FPS and stuttering). With CF disabled it worked fine.
Now with new drivers CF works nice and smooth, a big difference.
D300 cards is recognized as R200 after update.
Hope it helps.
It didn't work for me (nMP 2013, D700). I just got the same error message as before about no AMD hardware being found.
But thanks anyway.
Wow that's interesting, I was going to stay away from the omega drivers as GTA 5 is running quite well on my one D700 but if crossfire works smoothly with omega then I might have to try this out. Thanks for the info
Wow that's interesting, I was going to stay away from the omega drivers as GTA 5 is running quite well on my one D700 but if crossfire works smoothly with omega then I might have to try this out. Thanks for the info
I don't think he's talking about the Omega (December) driver. I think he's talking about the 15.4 BETA driver which seems to be easier to install on the D300 than the D500 or D700, probably because of the different chip architecture.
Having said that, I was able to get the 15.4 Beta to work on my nMP with D500s, but the performance in crossfire in Dragon Age Inquisition and Dying Light was so bad, and there were so many unexplained crashes (while installing GTAV) that I reverted (with some difficulty) to the Omega drivers and am currently playing GTAV fine, with crossfire disabled (albeit with overclocking...). I would like to hear if anyone else has been able to make the 15.4 Beta work reliably on the D500 or D700s. For information's sake: I was able to get them to install by replacing not merely the "installmanager" .dll and .exe but the entire Bin64 directory with the Bin64 directory from the December bootcamp drivers ... and then by uninstalling Catalyst Control Centre and reinstalling a previous version ... very tricky.
I got the 15.4 Beta drivers working with D700's and GTA 5 Now works perfectly in crossfire. yay, I also followed this https://forums.macrumors.com/threads/1866962/