Intel-based iMac as a computer and a 2K/5K display

[4nthony]

This information is not usable.
I need the part number of the LCD panel.
Something like one of the below


LM270QQ1 SDA1 2014
LM270QQ1 SDA2 2015
LM270QQ1 SDB1 2016
LM270QQ1 SDC1 2017
LM270QQ1 SDE1 2019
LM270QQ1 SDF1 2020 (iMac 2020)

DIY 5K Universal R1811 V.4 Driver Board USB-C Freesync EDP DP1.4 Compatible for iMac LM270QQ1 LM270QQ2 Screen External Monitor - AliExpress 7

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

I had some time today to pull the display from the iMac. The part number for the LCD is:

LM270QQ1 SD C1

The board you linked to appears to be an all-in-one solution. Is there anything else I would need to do the conversion besides a three-prong US electrical plug?

Do you have any suggestions for a video/tutorial that covers all the steps necessary to complete the conversion?

Thank you for the assistance!

 

[Nguyen Duc Hieu]

I had some time today to pull the display from the iMac. The part number for the LCD is:

LM270QQ1 SD C1

The board you linked to appears to be an all-in-one solution. Is there anything else I would need to do the conversion besides a three-prong US electrical plug?

Do you have any suggestions for a video/tutorial that covers all the steps necessary to complete the conversion?

Thank you for the assistance!

The link I sent you already got the driver board for your LCD model.
Depending on how would you like to re-use other parts of the iMac, and where you want the ports to be, you will need other jacks and parts.

The video on post #5.