Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
I can’t say as I’ve never tried it. I was referring to the Torras Diamond Sheild model that I’m using for the second year now and it’s only gotten better.
I have a Torras and none of the edges are curved. Did I get a bad unit? I get what you mean by flat adhesive and curved sides—but mine isn’t like that at all
 
As far as I can see, the WSKEN is flat, not curved. If it is curved, it can’t handle a case. I have a WSKEN installed right now.
Yeah I meant like if you look at the ESR on Amazon they have a curved edge in the pictures. The Torras doesn’t have that and frankly, between the dust and this feature missing, it isn’t that great lol
 

Attachments

  • IMG_0880.jpeg
    IMG_0880.jpeg
    937.5 KB · Views: 105
The ESR is terrible this year - covers way too much of the actual screen. The Torras is best in class - best install, no dust, great service. What a great protector. Good luck!
 
  • Like
Reactions: VSMacOne and J Ham
The ESR is terrible this year - covers way too much of the actual screen. The Torras is best in class - best install, no dust, great service. What a great protector. Good luck!
I agree. The ESR sucks in other ways. I think a few other members in this forum have said that there isn’t a perfect protector. You gotta make a compromise in some way depending on which one ya want sadly.
 
Last edited:
I agreee. The ESR sucks in other ways. I think a few other members in this forum have said that there isn’t a perfect protector. You gotta make a compromise in some way depending on which one ya want sadly.
Torras is the least compromise so far this year. In some installations it barely covers the screen (mine does not cover it at all), but Torras is clearly the best of the bunch. And dust always impacts the sides of the protector. No matter which one so its not something I am overly concerned about.
 
  • Like
Reactions: GeneticBloom
Yeah I meant like if you look at the ESR on Amazon they have a curved edge in the pictures. The Torras doesn’t have that and frankly, between the dust and this feature missing, it isn’t that great lol
I’m fairly sure most of the modern ones have the glass that slightly curves on the sides. I’ve used ones in the early days of tempered glass protectors that were not curved and you could tell a difference.
 
I’m fairly sure most of the modern ones have the glass that slightly curves on the sides. I’ve used ones in the early days of tempered glass protectors that were not curved and you could tell a difference.

Torras does not have this curve. ESR does. I’ve used both.

Torras is the least compromise so far this year. In some installations it barely covers the screen (mine does not cover it at all), but Torras is clearly the best of the bunch. And dust always impacts the sides of the protector. No matter which one so its not something I am overly concerned about.


The only compromise the ESR has currently is the eating into the screen—bet they’ll adjust it at some point. Also, the ESR didn’t collect as much dust as the Torras in my experience. Had the ESR on since launch—switched to the Torras 2 days ago, and I can report that the Torras is worse for dust.
 
  • Haha
Reactions: drew0020
Torras does not have this curve. ESR does. I’ve used both.




The only compromise the ESR has currently is the eating into the screen—bet they’ll adjust it at some point. Also, the ESR didn’t collect as much dust as the Torras in my experience. Had the ESR on since launch—switched to the Torras 2 days ago, and I can report that the Torras is worse for dust.
ESR sucks this year and collects just as much dust on the edges as any protector I’ve used. Do you work for ESR lol? I mean the protector is terrible and their customer service is worse.
 
  • Like
Reactions: VSMacOne
Torras does not have this curve. ESR does. I’ve used both.




The only compromise the ESR has currently is the eating into the screen—bet they’ll adjust it at some point. Also, the ESR didn’t collect as much dust as the Torras in my experience. Had the ESR on since launch—switched to the Torras 2 days ago, and I can report that the Torras is worse for dust.
The Torras Diamond Shield I have on my 15 PM right now definitely has the curved edges.
 
ESR sucks this year and collects just as much dust on the edges as any protector I’ve used. Do you work for ESR lol? I mean the protector is terrible and their customer service is worse.
No I returned my ESR ones because of the border eating into the screen.
 
  • Like
Reactions: drew0020
The Torras Diamond Shield I have on my 15 PM right now definitely has the curved edges.
I just have a bad batch or something cause I don’t have that. I’ll message their support and see what’s up.
 
After reading this weedy thread and doing some looking around and watching a YouTube video by HighThecCheck I decided to get a Wsken…
 
It is hard to find them, but I have received the last package of the WSKEN iPhone 15 Pro Max screen protectors (without privacy feature). They won’t be available for 1-2 months.

They promise that it will be incredibly easy to install the screen protector bubble free. And they delivered. First, you will put the iPhone in the box. Then make it dust free with the stickers. Then close the box and tear the protective film out of the box. The top of the box can actually roll. I had to put some pressure on it. It rolls out all the bubbles. I did this twice and then removed the last protective layer.

The screen protector is very near edge-to-edge, not cutting off the screen and is case friendly. If it was even more to the edges, it couldn’t work with a case.

So far, these are the best-fitting screen protectors for the iPhone 15 Pro Max I have had so far. And installing is super easy. If I were you, I would order a set when it will be available again. I am very impressed!

( * I am in no way affiliated to WSKEN).

I just ordered one, thanks 👍
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Which do you think? WSKEN or BENKS?
I do want matt not anything glossy or with a glare.

 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
That black around the camera is unnecessary IMO. No thanks.
There’s a WSKEN without that black around the camera. ;)

 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Torras Diamond Shield Pics here.

Yea so those are the pics i took a couple weeks ago now and it does collect dust, but i’m also caseless. It does also go into the screen a tiny bit and Torras is “working” on a revised version so hopefully that comes out soon.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.