Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
i'm not asking about image filters by the way. do any of you expert eyes with photoshop think this photo has been shopped/altered? if you need more information, please ask, however, i assume it's probably best if you see it with as little information as possible so you're not predisposed one way or another.
 

Attachments

  • img01.jpg
    img01.jpg
    100.5 KB · Views: 728

kenoh

macrumors 604
Jul 18, 2008
6,507
10,850
Glasgow, UK
I hope this isnt to try and support a claim on someones inheritance! :)

I cannot tell. At best I think the lighting / WB may be different on the boy on the left. Other than that, I cannot see anything but I am not an expert.
 

anotherscotsman

macrumors 68020
Aug 2, 2014
2,369
16,735
UK
I'm not an expert but using the curves adjustment that i normally use to identify sensor dust (sinusoidal with 4 peaks-and-troughs) to emphasise edges and tonal changes, it doesn't look overtly altered in a major way to remove or add features. Doesn't rule out global changes (grain, colour, contrast etc) though. Looks like it could be a scan of an old photo taken in poor lighting conditions and perhaps a bit faded.
 

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
I hope this isnt to try and support a claim on someones inheritance! :)
it's not. nothing like that going on here :)

Doesn't rule out global changes (grain, colour, contrast etc) though.
by global, i take it you mean a change applied to the entire image, not specific sections of it, right?

Is this is where the OP says it is the same boy taken at three stages baby -> toddler -> junior :)
funny, but no :) i have no knowledge of that being the case. i'm not pulling a prank here.

thanks for your responses so far! despite you saying you're not experts, they've been pretty good. hopefully we can answers from a few more people in here. maybe an expert will even show up :)
 
Last edited:

Varmann

macrumors regular
Jan 3, 2010
154
71
As the others I am not an expert but I am suspicious about the head size of the child to the left. The distance from top of the head to tip of the chin is exactly the same for the children to the left and right. They are that different in age that you should have a certain difference. The perspective may play a role here but, but it looks like they are not that far apart regarding distance to the lens. Kids at that age increase their head size about 1 inch per year (circumference).

In addition you have that difference in lightning on both. The proportions of the face compared to the surrounding head looks a bit off as well. If it is photoshopped it is pretty well made, but my guess is that the face of the kid to the left is put on the head of an older kid.
 

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
as for the lighting it might mean there was a problem with the flash that got corrected after the picture was taken but it sort of washed out the kid on the left's face.

as for head size maybe the kid just had a big head for their age and their face hadn't quite caught up? and the kid on the left does seem a little closer to me. though i see what you're saying. that does look unusual now that you mention it. doesn't seem conclusive though.

perhaps some of the good people here have some explanations for this. i know that strange optical illusions can sometimes happen.
 
Last edited:

kenoh

macrumors 604
Jul 18, 2008
6,507
10,850
Glasgow, UK
Hmm, looking at it again, I see the face scaling questionability. My points would be:

1. White balance on boy on left looks different to baby and older boy. Seems cooler
2. The level of the cushion on the back of the chair is different a la Mona Lisa on either side of the boy on the right - this could just be a play of positioning mind you.

How are we doing?
 

dwig

macrumors 6502a
Jan 4, 2015
908
449
Key West FL
To start with, this copy of the image is way way too low resolution to be certain whether there were any significant alterations done, period.

Things that can be said:
  • It is an older film photograph and either the original film or a decent print was scanned using some type of device (scanner, copy camera setup, ...) and software to create a digital file. That, to some degree "alters" the original image. In fact, printing a negative "alters" the image as the operator of the printer make decisions about color balance and density.
  • At some point in its life, the digital file was processed by Photoshop v3 (that's version 3.x from 20 years ago and NOT CS3). I don't know Ps's "fingerprinting" (there is text in the header of the file which can be read by opening the image in a good text editor) well enough to know whether v3.0 and v3.5 (the first available on Windows) use slightly different entries or whether they both use just 3.0. I suspect that this was actually 3.0 and not 3.5 which would indicate that it was done with a Mac as 3.0 was Mac only.
  • Close examination shows very uniform noise patterns. If any retouching was done, it was done on a much higher resolution copy before downsampling to this small size and conversion to JPEG from the original scanner format, probably TIFF.
  • Global (that is, uniform across the entire image) adjustments for color and densities could have been applied when the scanned image was done. The image looks like the original film or print had faded and some correction has been done, though better correction is likely possible.
 

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
Hmm, looking at it again, I see the face scaling questionability. My points would be:

1. White balance on boy on left looks different to baby and older boy. Seems cooler
2. The level of the cushion on the back of the chair is different a la Mona Lisa on either side of the boy on the right - this could just be a play of positioning mind you.

How are we doing?
You people on the forum here noticed everything I was wondering about, i. e. why I asked.
What do you mean by a 'play of positioning'?

To start with, this copy of the image is way way too low resolution to be certain whether there were any significant alterations done, period.
960x720 is the highest resolution I have but for future reference with other images, what resolution do you recommend people obtain images in? Thanks for telling me about resolution. I thought 960x720 would be good enough. I admit I don't know much about photography.

Things that came purely from color balance and density decisions during scanning isn't the kind of alteration I'm talking about. But that is a type of alteration, good point.

You talked about Photoshop 3.0 being in the header. Looking at it, I also see 'FB' in the header. Processed by Facebook, I thought? I uploaded a different photo to facebook today to test this, and it completely reworked the header and put both 'FB' and 'Photoshop 3.0' in it! I wasn't expecting that.
It looks like facebook runs people's photos through a batch process with really old Photoshop from the 90's for compression. That's crummy.

EDIT: I just found out facebook, for a long time, had a default max image size of 960x720 unless the uploader remembered to hit the high quality switch, so if it went through facebook, someone could have uploaded a file with a higher resolution but facebook cut it down.

Close examination shows very uniform noise patterns. If any retouching was done, it was done on a much higher resolution copy before downsampling to this small size and conversion to JPEG from the original scanner format, probably TIFF.
But no retouching was done at this resolution, anyway. Good to know, thanks. How high would the resolution have to have been, do you estimate?

Global (that is, uniform across the entire image) adjustments for color and densities could have been applied when the scanned image was done. The image looks like the original film or print had faded and some correction has been done, though better correction is likely possible.
What is 'better correction' as opposed to 'some correction'?
 
Last edited:

kenoh

macrumors 604
Jul 18, 2008
6,507
10,850
Glasgow, UK
You people on the forum here noticed everything I was wondering about, i. e. why I asked.
What do you mean by a 'play of positioning'?


960x720 is the highest resolution I have but for future reference with other images, what resolution do you recommend people obtain images in? Thanks for telling me about resolution. I thought 960x720 would be good enough. I admit I don't know much about photography.

Things that came purely from color balance and density decisions during scanning isn't the kind of alteration I'm talking about. But that is a type of alteration, good point.

You talked about Photoshop 3.0 being in the header. Looking at it, I also see 'FB' in the header. Processed by Facebook, I thought? I uploaded a different photo to facebook today to test this, and it completely reworked the header and put both 'FB' and 'Photoshop 3.0' in it! I wasn't expecting that.
It looks like facebook runs people's photos through a batch process with really old Photoshop from the 90's for compression. That's crummy.

EDIT: I just found out facebook, for a long time, had a default max image size of 960x720 unless the uploader remembered to hit the high quality switch, so if it went through facebook, someone could have uploaded a file with a higher resolution but facebook cut it down.


But no retouching was done at this resolution, anyway. Good to know, thanks. How high would the resolution have to have been, do you estimate?


What is 'better correction' as opposed to 'some correction'?

By play of positioning, it could be the design of the chair/sofa. If the back is higher than the arm, and the boy is wedged in the corner to optimise support when holding baby, then maybe one side is the back cushion and the other is the arm so it would legitimately be at different heights. However the picture makes it look flat background and so I am struggling to work out if that is right or whether it is a Mona Lisa moment (the horizon on each side of her head are different heights).
 

dwig

macrumors 6502a
Jan 4, 2015
908
449
Key West FL
...
960x720 is the highest resolution I have but for future reference with other images, what resolution do you recommend people obtain images in? Thanks for telling me about resolution. I thought 960x720 would be good enough. I admit I don't know much about photography.

The best resolution for image distribution varies with the type of distribution, but is not, as a rule, the best resolution for editing or an "forensic" evaluation. I would suggest creating "master" files at resolutions of 2400x3600px or higher Retouching and adjustments done on higher resolution files can become undetectable when a lower resolution copy is made for distribution. Also, the original scans and master files should NEVER EVER be JPEGs.

What is 'better correction' as opposed to 'some correction'?

If you are reproducing an existing print (e.g. scanning an old photo) you have to pick between 3 "targets"; match the existing print, match what the existing print would have originally looked like, match the original scene. Only then do you have a base for deciding what "better" means.

The image in the original post looks very very "warm" (orange/red). Based on the shadows, it was not taken on a daylight balanced film with tungsten lighting, and thus the warm cast, but instead was taken with some type of small flash (note the sharp shadows) which would result in proper color balance. The blanket in the lower right appears to have been rather white. On that assumption, a simple one-click Photoshop curves adjustment produced this "better" color balance:
3kids.jpg
 
Last edited:

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
By play of positioning, it could be the design of the chair/sofa. If the back is higher than the arm, and the boy is wedged in the corner to optimise support when holding baby, then maybe one side is the back cushion and the other is the arm so it would legitimately be at different heights. However the picture makes it look flat background and so I am struggling to work out if that is right or whether it is a Mona Lisa moment (the horizon on each side of her head are different heights).
I see what you mean.

The best resolution for image distribution varies with the type of distribution, but is not, as a rule, the best resolution for editing or an "forensic" evaluation. I would suggest creating "master" files at resolutions of 2400x3600px or higher Retouching and adjustments done on higher resolution files can become undetectable when a lower resolution copy is made for distribution. Also, the original scans and master files should NEVER EVER be JPEGs.

If you are reproducing an existing print (e.g. scanning an old photo) you have to pick between 3 "targets"; match the existing print, match what the existing print would have originally looked like, match the original scene. Only then do you have a base for deciding what "better" means.

The image in the original post looks very very "warm" (orange/red). Based on the shadows, it was not taken on a daylight balanced film with tungsten lighting, and thus the warm cast, but instead was taken with some type of small flash (note the sharp shadows) which would result in proper color balance. The blanket in the lower right appears to have been rather white. On that assumption, a simple one-click Photoshop curves adjustment produced this "better" color balance:
(attachment trimmed)
Thanks, dwig. That's fascinating. Yeah, analog pictures taken with a flash that are scanned do tend to get red/orange, I've noticed that with some pictures I've scanned anyway. I guess in those cases, it was me forgetting to optimize the color settings. Could be what happened here with whoever scanned it.

Also, I have seen some people's software make their master files JPEGs. I see now that's bad software. I was reading today one could use something called "error level analysis" on JPEG's to estimate how and if a JPEG had been resized since it was converted to a JPEG. Something about how after it was resized it would create a second artifact grid. Is that something you ruled out when examining noise?
 
Last edited:

dwig

macrumors 6502a
Jan 4, 2015
908
449
Key West FL
... I was reading today one could use something called "error level analysis" on JPEG's to estimate how and if a JPEG had been resized since it was converted to a JPEG. Something about how after it was resized it would create a second artifact grid. Is that something you ruled out when examining noise?

I didn't notice any significant JPEG compression artifacts.

The big problem with JPEGs is that their compression is lossy with distinct artifacts and that it is impossible for any app to actually edit or reprocess a compressed file without decompressing it first. The reprocessed file would not longer be a JPEG, at least while in memory, and saving it again as a JPEG would generate new additional compression artifacts.

It is not necessarily a bad thing that some scanning software defaults to saving as JPEG. JPEGs are easily viewed any device or computer. It's only a "bad thing" when a more advanced user scans with the intention of saving a master file for later alteration and fails to change the save format to TIFF or some other uncompressed lossless format.
 

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
dwig, I see. So it would be easy to tell roughly how much a JPEG was saved, even if not modified. Thanks.

Fun fact: I found that image was last saved at 82% JPEG compression, a little less lossy than most Facebook photos today (71% is usual these days). In the old days, with lower resolutions they were saving it at 85% sometimes.

filmbufs, what do you mean by that? You think some things should be done to it?
 
Last edited:

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
It just occurred to me this could be a mixture of tungsten and flash... say there was an incandesant light source to the right of the picture, just off screen, like a regular living room lamp. That could mess up the white balance and might explain why the boy farthest to the left is 'cooler' looking, as he was farther away from the lamp. Right?
 
Last edited:

dwig

macrumors 6502a
Jan 4, 2015
908
449
Key West FL
It just occurred to me this could be a mixture of tungsten and flash... ...

I doubt that this is the case. The two light sources don't truly "mix". Each would cast its own shadows and there will be color balance differences in the shadows. In this image, the "tint" on the wall and the tint in the sharp shadows on the wall match too well for the light filling the shadows to be radically different color than the flash.
 

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
I doubt that this is the case. The two light sources don't truly "mix". Each would cast its own shadows and there will be color balance differences in the shadows. In this image, the "tint" on the wall and the tint in the sharp shadows on the wall match too well for the light filling the shadows to be radically different color than the flash.

The tint on the baby's face does seem to be some point between the kid on the left's face and the kid on the right's face though. It seems to me that the further to the right you go in the image, the less the flash color temperature. What do you think could cause that?

IMO perhaps the picture was taken too closely, and the flash hit the boy on the left the hardest, and the other people in the image didn't have as much flash on them. The picture could then have partially faded before the scan, leaving only the brightest parts with the correct color cast, the other parts being easier for the scanner to "orangify".
 
Last edited:

mcblade

macrumors newbie
Original poster
May 30, 2017
9
0
somewhere in time!
Well, I would say that dwig doesn't seem to think this picture has anything that we can see from the resolution we have that shows it was modified in a non-global fashion. I think it was not photoshopped/altered significantly and I'm going with that because that's the best answer I can get with the information available. @dwig seems on the level and knowledgeable.

As an update, I have found from another picture of these people that the "head size" thing is not an issue. Also there is a plaid something folded up on top of the back of the couch in this picture which is making it look uneven a la Mona Lisa but it's not actually part of the couch.
 
Last edited:
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.