Last night I bought two new X5680 3,33GHz processors and will being having the IHS removed prior to installation. Total cost will be $638 with IHS removed.
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Just upgrade my DP Mac Pro to 12 core! It flies!
- Thread starter Amethyst
- Start date
- Sort by reaction score
+100 Best route to go in terms of cost efficiency plus speed gains. I would have also wanted the IHS removed. Most of the design studios and video editing firms went to the route of upgrading their cMac Pros CPUs instead of buying new Macs. They commented this gives them flexibility to continue charging competitive, low fees to their clients.
Well this is my first post, I joined the forum to talk about my upgrade of a 2009 8 Core MacPro to a 12 Core.
CPU Choice - x5680
First let me say this.....I am confident that most people who say not to attempt to DeLid Soldered CPU's are simply regurgitating other peoples fears and likely have no first hand experience. It is so insanely easy, its almost criminal that people who are packaging DeLided CPU's with the Thermal Past, Thumb Drive, and cleaner, then marking it up over 300.00 over buying the parts separately and DeLiding the CPU it yourself.
Step 1 - Use the Vice Method (NO HAMMER).
https://www.youtube.com/watch?v=AizBSTndfLg
I personally took it one step further, but in hindsight, it was not necessary. I took an exacto blade and cut into the corner sections of the IHS where they are Siliconed to the CPU. I barely cut into each corner.I applied pressure in the vice, let it set for a minute, then applied a little more pressure, let it set for a minute.
Took the CPU/IHS out of the vice, turned it 1/4, then repeated the previous steps. Then took it out, took it back 1/4 turn (Original Starting Location) applied pressure, a little at a time until I started to see the IHS slide on top of the CPU, then took it out of the Vice and slid it by hand the rest of the way off.
The Vice Only method was a piece of cake.
Full discolor, right after Deliding the fist CPU, I was in a terrified moment for a while because, especially on the first CPU there was a ton of Solder that had to be removed. As I was scraping it off with a Utility Knife Blade, visually it seemed like I was cutting into the Die that is on top of the CPU, but that's not what it was, it was the Solder that made it look that way. It took me about 15 minutes per CPU to scrape off the old Solder and clean up the Silicone that is around the CPU.
Just as a precaution, I decided to just DeLid one CPU, then install it to confirm I didn't damage it prior to going head over heels by DeLiding both. This way, if I did screw it up, I only had to buy one CPU to replace and not two. Remember, because this was new to me, I still at this point was not sure if my decision to DeLid verses wait for the Washers and Thermal Paste to arrive was the right one.
After DeLiding the first CPU, I installed it in CPU A slot on the tray, with no CPU in CPU B Slot. This was my test to see if I damaged my CPU or not.
I installed the first CPU in CPU A slot, left CPU B out. It booted up right away revealing that I had a 6 Core CPU in the computer. Note: With just one CPU in the A Slot, after competing booting, it's normal for all the Fans to blow at full speed. They will go back to normal behavior once you have the second CPU installed. So don't panic when you hear the fans blowing full speed!
So off to DeLiding CPU number 2, put it in, same steps as the first, and BAM. No more fans, all is great.
Typing this on my new
12 Core
Check out my new Geekbench scores, 32 bit and 64 bit scores!!!!!!!
27,492 - 32 Bit
30,377 - 64 Bit
Only 6gb Ram when testing, but I now have 24gb the faster RAM on the way!
Forget the Washers, Forget the Thermal Pad, Forget Clipping the Fan Connector
Delid and be done, it's so easy!!!!
CPU Choice - x5680
First let me say this.....I am confident that most people who say not to attempt to DeLid Soldered CPU's are simply regurgitating other peoples fears and likely have no first hand experience. It is so insanely easy, its almost criminal that people who are packaging DeLided CPU's with the Thermal Past, Thumb Drive, and cleaner, then marking it up over 300.00 over buying the parts separately and DeLiding the CPU it yourself.
Step 1 - Use the Vice Method (NO HAMMER).
https://www.youtube.com/watch?v=AizBSTndfLg
I personally took it one step further, but in hindsight, it was not necessary. I took an exacto blade and cut into the corner sections of the IHS where they are Siliconed to the CPU. I barely cut into each corner.I applied pressure in the vice, let it set for a minute, then applied a little more pressure, let it set for a minute.
Took the CPU/IHS out of the vice, turned it 1/4, then repeated the previous steps. Then took it out, took it back 1/4 turn (Original Starting Location) applied pressure, a little at a time until I started to see the IHS slide on top of the CPU, then took it out of the Vice and slid it by hand the rest of the way off.
The Vice Only method was a piece of cake.
Full discolor, right after Deliding the fist CPU, I was in a terrified moment for a while because, especially on the first CPU there was a ton of Solder that had to be removed. As I was scraping it off with a Utility Knife Blade, visually it seemed like I was cutting into the Die that is on top of the CPU, but that's not what it was, it was the Solder that made it look that way. It took me about 15 minutes per CPU to scrape off the old Solder and clean up the Silicone that is around the CPU.
Just as a precaution, I decided to just DeLid one CPU, then install it to confirm I didn't damage it prior to going head over heels by DeLiding both. This way, if I did screw it up, I only had to buy one CPU to replace and not two. Remember, because this was new to me, I still at this point was not sure if my decision to DeLid verses wait for the Washers and Thermal Paste to arrive was the right one.
After DeLiding the first CPU, I installed it in CPU A slot on the tray, with no CPU in CPU B Slot. This was my test to see if I damaged my CPU or not.
I installed the first CPU in CPU A slot, left CPU B out. It booted up right away revealing that I had a 6 Core CPU in the computer. Note: With just one CPU in the A Slot, after competing booting, it's normal for all the Fans to blow at full speed. They will go back to normal behavior once you have the second CPU installed. So don't panic when you hear the fans blowing full speed!
So off to DeLiding CPU number 2, put it in, same steps as the first, and BAM. No more fans, all is great.
Typing this on my new
12 Core
Check out my new Geekbench scores, 32 bit and 64 bit scores!!!!!!!
27,492 - 32 Bit
30,377 - 64 Bit
Only 6gb Ram when testing, but I now have 24gb the faster RAM on the way!
Forget the Washers, Forget the Thermal Pad, Forget Clipping the Fan Connector
Delid and be done, it's so easy!!!!
