macOS 15 Sequoia on Unsupported Macs Thread

[Frantisekj]

Hello guys,

Haven't been here for long as all was working fine. And it still is. But want to thank again for all effort you put into and with Tahoe you have plenty of work for years I guess 😁

Even I was not advised to to it directly, I first made installer disk for latest Sequoia, but then performed OTA from 15.1 to 15.7.3. I was stressed a bit as machine restarts so many times that one do not know whether it is natural or ending in some kind of loop. But all went fine, OCLP downloaded on background needed patches and I can use it happily till I get some M1. 😁 And I forgot, it was non retina 15" 2012 MBP9,1

On other side I experienced my, I guess, first hard freeze when I was stressing book with creating catalina installer and doing other things. Probably because of FeatureUnlock Enabled as I was dealing with AirDrop. That is only thing that doesn't work properly. I can see phone or other Mac but phone does not see me. And that is the most important direction phone to mac, but Blip helps to overcome that.

I had some questions as I tried other machine as well and was not sucesfull. But I put it in other post.

 

[Frantisekj]

Important UPDATE. Sory for bothering. I put RAM from MBP 2012 instead of original one (from time before i upgraded it to 16 GB that I passed to 2012 MBP)
All errors are gone and mac is running on Mojave. Waiting for Monterey. Woudl you advice Sequioa? Or USB 1.1 is killer?

But some of my questions remains.

As I mentioned in previous post, I had success with 2012 MBP OTA but also troubles with MBP 2010.

I had some general questions as I can not find answers. Sorry if they are there but I have not found them.

Is it normal that original installer will disappear at some point? I needed it for another install and it was gone. Now I backed it up but several hours of downloading is not pleasant.

Can be OS Installed directly on external drive without using USB installer? There is not much info in guide.

To my latest experience. I tried to make Sequoia USB installer for MBP 7,1 before a I realized that Monterey is better option. I had Catalina on that mac for some time. I moved disk to current MBP and now wanted to pass old one to friend. I am unable to boot that MBP from whatever USB I created with Catalina patcher, OCLP Sequoia or Monterey. Tried so many scenarios and different USB that I became lost. Some failures was from wrong indentification of my mac as MBP6,1 instead 7,1.
As I said I made USB Sequoia disk but it never worked for me. I am cunfused from OCLP a bit. You put so much effort to make it dead simple but I am still quite unsure what I do in number of steps and in stress not to run something in my internal drive instead USB. Why?

First, you use just word drive. Please whenever we are working with USB, use USB drive or USB flash disk ot just word drive. OCLP shows system names of disks not one user put on them.

Is Installer made model specific or just EFI partition? If Installer, is it saved somewhere for later use or I have to spend time to build it every time? Could I save it?

Last time now when I tried, it offered me EFI partiton as final step. When selected it does nothing or give no result prompt. Even OCLP offered EFI partition, I do not see one in Disk utility and none shows when booking on target mac. USB is GUID as Disk utility shows.

Words in Build and Install section "Use on installers or internal drive" ever build stress whether I have not click and start process on my internal drive that wont be able to stop.

I spend two days to make this mac work again but so frustrated now as I do not know where I am doing something wrong. I took internal drive out as I propbably put there one where was Sequoia before and in verbose mode it said something like: (it is acquired through camera OCR, so m is usually n)

Kext load request buffer fron user
space still retained by a kext; probable nenory leak.
NVDAStartup: Official
GTrace synchronization point 8
Trace synchronization point 1
Refusing new kext con.apple.kpi.mach, v19.6:
already have Loaded v19.4.
Refusing new kext
con.apple.kpl.Libkern, v19.6: already have Loaded v19.4.
Refusing new
kext
Refusing new
con.apple.kpi.private,
v19.6: already have Loaded v19.4.
Refusing new
con.apple.kpi.unsupported,
19.6: already have Loaded v19.4.
Refusing new
con.apple.kpi. lokit,
v19.6: already have loaded v19.4.
con.apple. lokit. IOPCIFanily, v2.9: a loaded copy with a different executable WUID is already present.
Refusing
new
apple.kpt.bsd,
v19.6: already have Loaded v19.4.
Refusing new
Refusing new
kext
con.apple.driver .watchdog,
com.pLe.rIver. watchdog 1.0: 2 loded eye a different execute lot i already presentent
Refusing new
•apple.driver .AppleSHC,
v3.1.9: a loaded copy with a different executable UUID is already present
Kext load request buffer
fron user space still retained by a kext; probable nenory leak.
10KernelDebugger:
registering debugger
Refusing nev
kext
con.apple.kpi.nach, v19.6: already have Loaded v19.4.
Refusing new
kext
con.apple.kpi.lokit, 19.6: already have Loaded v19.4.
Refusing new
kext
Refusing new
con.apple.kpi.Libkern,
kext
Refusing new
con.apple.kpi.bsd,
v19.6: already have loaded v19.4.
v19.6: already have Loaded v19.4.
kext
Refusing new kext
con.apple.kpi-private,
v19.6: already have loaded 19.4.
Refusing new kext
con.apple.kpi .unsupported,
v19.6: already have loaded v19.4.
con.apple.lokit.INetworkingFanily,
v3.4: a loaded copy with a different executable UUID is already present.
Kext load request
buffer
Refusing new kext
fron user space still retained by a kext: probable nenory leak.
con.apple.kpi.bsd,
Refusing new kext
v19.6: already have loaded v19.4.
con.apple.kpt.
Libkern, v19.6: already have loaded v19.4.
Refusing new kext con.apple.kpi.nach,
v19.6: already have Loaded v19.4.
Refusing new kext con.opple.kpi.private, v19.6: already have Loaded v19.4.
Refusing new kext
com.apple.kpl.unsupported, v19.6: already have loaded w19.4.
Refusing new kext
con.apple.kpi. lokit,
v19.6: already have Loaded v19.4.
Refusing new kext
Kext
Load request
com.apple. lokit. 10PCIFanily, v2.9: a loaded copy with a different executable UUID is already present. buffer fron user space still retained by a kext; probable menory Leak.
Refusing new
kext
con.opple.kpi.lokit, v19.6: already have loaded v19.4.
Refusing
new
kext
con.apple.kpi.libkern,
v19.6: already have Loaded v19.4.
Refusing new
Refusing new
kext con.apple.kpt.nach,
v19.6: already have Loaded v19.4.
kext
con.apple.kpi.unsupported,
v19.6: already have loaded v19.4.
Refusing new
kext con.apple.kpi.private,
v19.6: already have Loaded v19.4.
Refusing Refusing
new kext con.apple.lokit. IOACP|Fanily,
v1.4: a Loaded copy with a different executable UUID is already present.
new kext
Refusing
con.apple.lokit.IOPCIFanily,
v2.9: a loaded copy with a different executable UUID is already present.
new kext con.
•apple.kpl.bsd, v19.6:
already have loaded v19.4.
Kext
load request buffer fron user space still retained by a kext: probable nenory leak.
ACPI: Dynanic
DEM Table Load:
ACPI: SSDT 0xFFFFFF8028589518 08027A (v81 APPLE Cpublst
00003000 INTL 20061189)
ACPI: Dynanic DEN Table Load:
ACPI:
SSDT BFFFFFF802RB7C110 0005A6 (v01 APPLE
CpuBCst
00003001 INTL 28061189)
ACPI: Dynanic 0EN Table Load:
ACPI:
SSDT BxFFFFFF802AAE8C10 0000C8 (v81 APPLE
CpulIst
88883800
INTL 20861189)
ACPI: Dynanic DEM
Table Load:
ACPI:
SSDT 0xFFFFFF802889DE78
008085 (v81 APPLE
CpulCst
80083000
INTL. 20861189)

As I tried so many times before deciding to as here I do not exactly remember from which try are those logs, this one probably wrong model set, not sure:

trollerd.plist, errokextLog: kernelmanagerd is not active
KextLog: Loading FileSet KC(s)
KextLog: Loading Pageable KC from file /Systen/Library/KernelCollect ions/BaseSystenKernelExtensions.ke
KextLog: Collection UUID matches with loaded KCs. deferred rematching count 1
10G flags 0x3 (Bx51)
AGDCBacklightControl: Didn't find DPMicro.
AppLeFWOHCI_DescriptorPool: :create - Link = ‹ptr›
Built-in ISight®24600000: IOUSBHostDevice: :setConf Igurat lonGated: AppleUSBHostCompositeDevice selected configu nfs_kext_start: successfully Loaded NFS kext register _decpfs_decompressor 0: CMP_Type3 failed: 17
GTrace synchronization point 1
com_apple_filesystems _nfs: successfully loaded NFS module
Unsupported CPU
Unsupported CPU
Unsupported PCH
GTrace synchronization point 3
Grace synchronization point 4
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 70c60fffe046036; max speed s800.
AppLeMikeyHIDDriver:0x1880003d6 open by IOHIDEventDriver:0x1008083e6 (Bx®)
register _decmpfs_decompressor 8: CMP_Type3 falled: 17

Another, longer one:

lifs _create_touc_container: new container <ptr› added (pid 136 pidversion 331) methodConf IgurelserCltent: client <ptr› pid: 136 pidversion: 331 supportBlockResource: 1
AMFI: Inon-fatall unable to accelerate context: com.apple.hfs | 245
com.apple.xpc. launchd |2001-01-05 14:25:17.783485 (system) ‹Error>: Falled to bootstrap path: path = /System/Library/LaunchDaemons/com.appte.diskmanagementstartu
p.plist, error = 37: Operation already in progress
ALUC:clientDied(pid: 136 pidversion: 331), fskitd_entitled 0 fsmodule_entitled 1 support_ block resource 1 lifs_destroy_touc_container: container ‹ptr› removed (pid 136 pidversion 331)
com .apple.xpc. launchd|2001-01-05 14:25:17.783487 (system) ‹Error>: Falled to bootstrap path: path = /System/Library/LaunchDaemons/com.apple.TrustEvaluattangent
•system.plist, error = 37: Operation already in progress KextLog: kernelmanagerd is not active
com.apple.xpc.launchd 2001-01-05 14:25:17.783490 (system)
(Error›: Failed to bootstrap path: path = /System/Library/LaunchDaemons/com.applexpc.uscwoap.plist, e
rror = 37: Operation already in progress
com.apple.xpc.launchd|2001-01-05 14:25:17.783492 (system)
(Error>: Failed to bootstrap path: path = /System/Library/LaunchDaemons/com.apple.ftlesystems.userfs.h
elper-plist, error = 37: Operation already in progress
KextLog: kernelmanagerd is not active
KextLog: Loading FileSet KC(s)
KextLog: Loading Pageable KC fron file /Systen/Library/KernelCol lections/BaseSystemKernelExtensions.kc
KextLog: Collection UUID matches with loaded KCs. deferred rematching count 1
I0G Flags Bx3 (Bx51)
AGDCBackLightControl: Didn't find DPMicro.
con.apple.xpc. Launchd |2001-01-05 14:25:17.783494 (system) ‹Error>: Failed to bootstrap path: path = /System/Library/LaunchDaemons/com.apple.security.authtrampol
ine.plist, error = 3Built-in iSight@24600000: IOUSBHostDevice: :setConfigurationGated: AppleUSBHostCompositeDevice selected configuration 1
AppLeALC
alc: @ failed to obtain device info for analog controller (1)
nfs_kext_start: successfully loaded NFS kext register_decmpfs_decompressor 0: CMP_Type3 falled: 17
Grace synchronization point 1
GTrace synchronization point 3
com_apple_filesystens_fs: successfully loaded NFS module
Unsupported CPU
Unsupported CPU
Unsupported PCH
AppLeFWOHCI_DescriptorPool: :create - Link = ‹ptr>
register_decnpfs _deconpressor 0: CMP_Type3 falled: 17
GTrace synchronization point 4
Driver con.apple.AppleUserHIDDrivers has crashed 0 time(s)
DK: AppleUserHIDEventDriver-0x1000003d9 waiting for server com.apple.driverkit.ApplelserHIDDrivers-1000003d9
FireWire (OHCI) Lucent ID 5901 butlt-in now active, GUID 70c60fffe046036; max speed $800.
7: Operation already in progress
shared region: 0x5628691eb31cc93 [140(con.apple.AppleU>] check_np(0x7ff7b78faaeB) vm_shared_region_start_address() falled
shared _reglon: 0x5628691eb31/c93 [140(com,apple.AppleU)] check_пр(0x7ff7b78f9a98) vn_shared_region_start_address() falled
ACPI: Dynamic OEM Table Load:
ACP1: SSDT OxFFFFFF9D82FA410 00027A (v01 APPLE Cpubist 00003000 INTL 20061109)
ACPI: Dynamic OEN Table Load:
ACPI: SSDT OxFFFFFF7914BF010 0005A6 (01 APPLE CpuBCst 00003001 INTL 20061109)
ACPT: Dynamic DEN Table Load:
ACPI: SSDT OxFFFFFF945F321510 0000CB (v01 APPLE Cpulist
ACPI: Dynamic OEN Table Load:
80063009 INTL 20061169)
ACPI: SSDT 0xFFFFFF9F8698990 000085 (V01 APPLE CpulCst
00003000
INTL 20061109)

Probably Sequoia atempt:

Jebugger called?
Backtrace
(CPU 1), Frane : Return Address
Exffffff911d8835c0
1 0xffffff80126dab52
0xffffff911d883640
nach kernel 1
pante + 0xe2
/ 0xffffff80127cedd
nach kernel
Exffffff911d883820 1 0xffffff80127ecca3
kernel_trap + 0xa53
8xffffff911d883840
0xffffff7f9441838
nach_
kernel
return_fron_trap + 0x3
com.apple.drIver.AtrPort.Brcn4360: _wic_phy_act_(nit_sphy + 8xb
Bxffffff911d883930
8xffffff911d883950
Exffffff7/944cd6c2
com.apple.drIver.AtrPort.Brcn4360
_wto_phy_cal__Init_sphy + Oxe
8xffffff911d883970
Oxffffff7f944a9ebe
con.apple.driver.AtrPort.Brcn4360: _wtc_phy_cal_Init + 8x1d9
Oxffffff911d883aaD
: 0xffffff7/9439a3b3
Bxffffff7f943aa031
con.apple.driver.AlrPort.Brcn4360 : _wic _bnac_init + Oxee
con.apple.driver.AtrPort.Brcn4360 : _wic_init + 0x2e0
8xffffff911d883b60
Oxffffff7f9430ffaB
com.apple.dri
8xffffff911d883bb0
Iver.AtrPort.Brcm4360 : _wL_intt + 8x4c
0xffffff911d883c90
Exffffff7f943bdcd6
: Oxffffff7f942ea31c
con.apple.driver.AirPort.Brcn4360 : _wIc_up + 0x362
con.apple.driver .AtrPort.Brc4360 : _wL_up + 0x6d
Exffffff911d883cb0
Oxffffff911d883d80
Oxffffff7f942f17
com.apple.driver AirPort.Brcm4360:
Oxffffff7f942eb400
ZN16ArPort_Brch436014syncPowerStateEmt + 8x7ae
con.apple.driver.AirPort.Brcn4360:
ZN16AIrPort_Brcm436019syncPowerStateGatedEPBOSObjectPv.
0xffffff911d883db0
Exffffff8012cb6818
mach_kernel
ZN1310CommandGate9runfict LonEPFIPBOSObjectPvS2_52_52 _ES2_5252. S2_ + BxiaB
0xffffff911d883e20
Oxffffff7f942ee4ba
com.apple.driver.AirPort.Brcm4360:
ZN16AirPort_Brcn436013setPowerStateEnP910Service + 8x1€
0xffffff911d88360
Oxffffff8012ca21ec
nach kernel
ZN910Service19driverSetPowerStateEv + 0x18c
Oxffffff911d883eeB
: 0xffffff8012c9b829
Bffffff911d883/00: 0xffffff801270f2da
mach_kernel
2N910Service15pnDriverCal loutEPS_ + 8x49
nach_kernel
_thread_call_|sactive + 8x148a
Bffffff911d883b®: 0xffffff801279507 nach_kernel: _call_continuation + 8x17
Kernel Extensions in backtrace:
con.apple.driver.AirPort.Brcn4360(1040.1.1а6) [3C7CF24-B256-3A0-9FC2-5D7CCEF683B41®8xffffff7f942d0008-›8xffffff7/94a02/ff
dependency: con.apple.driver.corecapture(1.0.4)[B686A881-B3AA-3BD5-AAC1-4F35F17D1D7D]@0xffffff7f9411800
dependency: con.apple.driver .DNSOffLoadUserCllent (1.0.1b8)[5262E7F8-D85C-336F-B5BF-0518D486FC32100xffffff7/941ebB08
dependency: con.apple.lokit.1080211FaniLy(1110.26)[043624F6-5979-30C5-A90D-482A5FA74911100xffffff7/941/3000
dependency: con.apple.lokit. IOPCIFaniLy (2.9) [CD762868-D3F5-3463-A60E-E3841C9CCD1]00xffffff7f92f2c000
dependency: con.apple.lokit.10NetworkingFaniLy (3.2)[8488398F-4D96-3024-8892-6CD3534D2CCA]®0xffffff7f9394b008
BSD process name corresponding to current thread: kernel_task
Boot args: keepsyns=1 debug=0x108 -Ll lubetaall
Mac 0S version:
15G1611
Kernel version:
Darwin Kernel Version 15.6.0: Sun Jun
4 21:43:07 PDT 2017: root :xnu-3248.78.3-1/RELERSE_XB6_64
Kernel UUID: B370DB23-7244-3441-B95D-384442442565
Kernel slide:
00000000012400000
Kernel text base: 0xffffff8012600000
Debugger not configured. Hanging.31760148589CB)
MacBook Pro

I resetted PRAM many times and not sure dual USB2/3 128 GB flash disk is for 2010 MBP good as AI warned me there couldl be some speed issue (too fast) but not sure was not hallucinating.

Sorry for long post. Appretiate any advice.

 

[dogen]

As I mentioned in previous post, I had success with 2012 MBP but also troubles with MBP 2010 …

The logs are above my pay grade, but have you tried asking an AI (Gemini, Claude, ChatGPT, DeepSeek) for analysis and recommendations?

 

[K two]

Installed OCLP 1.5.0n w/no issues.

 

[Bigwaff]

Can be OS Installed directly on external drive without using USB installer? There is not much info in guide.

No. You need USB installer with macOS and OpenCore on it. After boot installer USB, you clean install OC macOS on another external drive. Hold down Option key on boot to get macOS boot picker. You need to select OC EFI on external drive, then you get OC boot picker. Select macOS on external drive. Order of operations very important.

Is Installer made model specific or just EFI partition? If Installer, is it saved somewhere for later use or I have to spend time to build it every time? Could I save it?

Model specific as it boots and installs unsupported macOS on your old hardware. Needs specific OC EFI.

 

[Frantisekj]

The logs are above my pay grade, but have you tried asking an AI (Gemini, Claude, ChatGPT, DeepSeek) for analysis and recommendations?

Installed OCLP 1.5.0n w/no issues.

No. You need USB installer with macOS and OpenCore on it. After boot installer USB, you clean install OC macOS on another external drive. Hold down Option key on boot to get macOS boot picker. You need to select OC EFI on external drive, then you get OC boot picker. Select macOS on external drive. Order of operations very important.


Model specific as it boots and installs unsupported macOS on your old hardware. Needs specific OC EFI.

Thanks all for reply. I updated post. It was all my dumb fault. Wrong RAM. Machine was year in drawer.
HAs anyone Sequioa on It? Or Monterey is safe bet? Thanks

 

[Frantisekj]

But that my experience brings me now to question. If I came across USB drive and see Install Monterey on it for example. Can I somehow identify for what model is that installation made?

 

[Bigwaff]

But that my experience brings me now to question. If I came across USB drive and see Install Monterey on it for example. Can I somehow identify for what model is that installation made?

You can mount the EFI partition on USB and review OC config file.

 

[xboxbml]

You can mount the EFI partition on USB and review OC config file.

I just had to do that myself. Thanks!

 

[xboxbml]

I have what might be a dumb question.. Does this community have an IRC channel somewhere? Something more appropriate for realtime chats?

 

[Bigwaff]

I have what might be a dumb question.. Does this community have an IRC channel somewhere? Something more appropriate for realtime chats?

No, but OCLP has Discord server

The current hold on new issues and pull requests | OpenCore Legacy Patcher

 

[Frantisekj]

You can mount the EFI partition on USB and review OC config file.

Thanks for clarifying. I had something more dummie on my mind 😁

But I realized, that when I had USB disk, I can only do build and Install for different model and it alter EFI and it is done, right? No need to create whole new USB disk?

 

[xboxbml]

No, but OCLP has Discord server

The current hold on new issues and pull requests | OpenCore Legacy Patcher

Yeah, been in there a long time ago.. about the same as this. Thanks. Was looking more for IRC type chats. I went ahead and installed the Discord app on this 2012MBP/Sonoma. Getting used to how to use it. I'm definitely not very good at it.

 

[LookingOut]

I installed Sequoia 15.7.3 to test on my iMac 14,1 using a spare external SSD. Been running it with out issue for a day pretty stripped down except for a firefox install.

One thing I have noticed is when switching between Misson Control Spaces Desktops, there is a wide vertical black space between them, unlike in Sonoma where they were seamless with a slight dissolving effect if switching slowly between them. Other than that I have really noticed anything too different.

Anyway to remove the bar? Note - this is not affected by turning off "Tiled windows have margins".

 

[LookingOut]

Just finished upgrading to Sequoia on my primary external m2 drive from Sonoma via USB stick. BTW back to seamless spaces as mentioned in my previous post.

 

[xboxbml]

Yeah, been in there a long time ago.. about the same as this. Thanks. Was looking more for IRC type chats. I went ahead and installed the Discord app on this 2012MBP/Sonoma. Getting used to how to use it. I'm definitely not very good at it.

Well, seems it is like IRC. I'm on there now in the OCLP area. Like I said i was in there a long time ago. Just saw a couple of my posts from back then lol. Didn't know what i was doing really. Thanks

 

[LookingOut]

Looks like Apple is sneaking in the Tahoe Upgrade in with updates now. Just had a notification popup announcing - Did I want to download and install now or just download for now. No information as to what it included, so closed it off and checked out the updates.

I Just had Security responses and system files checked on auto no other options, which I've now turned off.

Including a screenshot of the update dialog box - they were all checked on when I originally opened it.

"Danger, Danger Will Robinson" - Don't click either option or it looks like it will stage Tahoe and ultimately install.

 

[xboxbml]

Looks like Apple is sneaking in the Tahoe Upgrade in with updates now. Just had a notification popup announcing - Did I want to download and install now or just download for now. No information as to what it included, so closed it off and checked out the updates.

I Just had Security responses and system files checked on auto no other options, which I've now turned off.

Including a screenshot of the update dialog box - they were all checked on when I originally opened it.


View attachment 2591938


"Danger, Danger Will Robinson" - Don't click either option or it looks like it will stage Tahoe and ultimately install.

You have to double check those all the time-after every update!

 

[LookingOut]

You have to double check those all the time-after every update!

I did in fact, after upgrading to Sequoia yesterday from Sonoma. First thing I did was to check, as there have been instances to reset back, as my previous post explained I just had security updates on and no other automatic check boxes checked.

But this is not an automatic download. Tahoe is in with all the other items and is checked to go without me checking them. But it has given me the option to install or download via the dialog box from notifications kind of circumventing the fact I don't want to install it as my auto is set to off. How many people will hit the button?

Nothing is staged and nothing downloaded. I've never seen a full System Upgrade appear in the Update section which is for macOS app updates and system point updates.


What's strange, Tahoe appears in both locations.View attachment 2591968

 

[amaze1499]

For whomever might find this useful:

Patched this system using 2.5.0 nightly. No issues.

 

[loby]

For whomever might find this useful:

Patched this system using 2.5.0 nightly. No issues.

View attachment 2592027View attachment 2592028

How about a link...

 

[LookingOut]

I did in fact, after upgrading to Sequoia yesterday from Sonoma. First thing I did was to check, as there have been instances to reset back, as my previous post explained I just had security updates on and no other automatic check boxes checked.

But this is not an automatic download. Tahoe is in with all the other items and is checked to go without me checking them. But it has given me the option to install or download via the dialog box from notifications kind of circumventing the fact I don't want to install it as my auto is set to off. How many people will hit the button?

Nothing is staged and nothing downloaded. I've never seen a full System Upgrade appear in the Update section which is for macOS app updates and system point updates.


What's strange, Tahoe appears in both locations.View attachment 2591968

Clarification,

I am fully aware of the auto update issues at and to double check the update settings after system updates and upgrades. What I did not realize is that the Upgrade to Tahoe is included in the Updates section and is checked on to install.

What my main concern is, that a full Tahoe upgrade option could be triggered since it is auto checked in the Updates, via clicking the notification dialog box with out checking what is actually in there.

And - the fact that Also Available section gives you the option to update. Some people may assume it's just the listed item, in my case Command Line Tools while in fact the full upgrade to Tahoe is listed inside and checked on ready to install.

This just opens up two more (un)avoidable upgrade paths for people. It's an easy mistake for people to make.

 

[mikelets456]

Hello all, quick question. The last time I updated was sometime in May 2025 on 2.4.0…I noticed there’s another update to 15.7.2 and I updated to 2.4.1 to prepare for the download. I started the update , OCLP opened then closed down. Is that supposed to happen? I’m used to updating and then OCLP with a pop up message stating “you’re updating would you like OCLP to update metal libs”? Or something like that…I have an 11,4 2015 MacBook Pro

 

[MacMorrison]

Did your OCLP update properly to 2.4.1?

The latest version of Sequoia is 15.7.3.

 

[mikelets456]

Did your OCLP update properly to 2.4.1?

The latest version of Sequoia is 15.7.3.

No it didn’t . It kept stating that OCLP can not install while a program is updating. I reverted patches, rebooted then it updated. Not sure if that screwed up something