Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.

zappaesque

macrumors member
Jun 10, 2017
73
60
Mr. @zappaesque Thank you for supporting people on this thread. The reality. you know much better than me my own method 3 :)) Because you've installed El Cap on more machines than me. Great!!

My pleasure. I don't know any more than you do. I just followed your instructions and figured these things out. For that, thank YOU :)
 

Db8

macrumors newbie
Dec 29, 2017
7
0
Hi guys help required please.
Trying to install El Capitan to a bootable 16gb usb stick.

Gets so far in then says not enough room on disk.

Useing the creatmedia sudo link from Apple help to creat boot disk with installer app from App Store.

Using disk Utility shows :

External

Name of manufacture of disk
Install OS X El Capitan. Used 6.48 gb

Disk image

Apple disk image
OS X base system. Used 2.01 gb

Apple disk image
OS X install ESD. Used 6.42 gb

53 mb available out of 16gb.

Any ideas what I’m doing wrong ?
 
Last edited:

jbarley

macrumors 601
Jul 1, 2006
4,023
1,895
Vancouver Island
Hi guys help required please.
Trying to install El Capitan to a bootable 16gb usb stick.

Gets so far in then says not enough room on disk.

Useing the creatmedia sudo link from Apple help to creat boot disk with installer app from App Store.

Using disk Utility shows :

External

Name of manufacture of disk
Install OS X El Capitan. Used 6.48 go

Disk image

Apple disk image
OS X base system. Used 2.01 go

Apple disk image
OS X install ESD. Used 6.42 go

53 mb available out of 16gb.

Any ideas what I’m doing wrong ?
Are you following the instructions found on this page?
https://support.apple.com/en-ca/HT201372
 

fnatix

macrumors newbie
Feb 18, 2018
2
0
Hey guys, I tried to install El Capitan on a MacBook late 2007, but failed ...
I've used MacPostFactor (2.0.1) to make a bootable Stick with El Capitan (freshly loaded from App Store), works fine.
If I try to boot from the stick, Installation starts but after 20% my MacBook suddenly makes a restart and bring me back to my main partition (Lion). If I try to install El Capitan with MacPostFactor on a second partition, I get Error 1. Anyone got an idea or a tipp for me?
 

zappaesque

macrumors member
Jun 10, 2017
73
60
Hey guys, I tried to install El Capitan on a MacBook late 2007, but failed ...
I've used MacPostFactor (2.0.1) to make a bootable Stick with El Capitan (freshly loaded from App Store), works fine.
If I try to boot from the stick, Installation starts but after 20% my MacBook suddenly makes a restart and bring me back to my main partition (Lion). If I try to install El Capitan with MacPostFactor on a second partition, I get Error 1. Anyone got an idea or a tipp for me?

Follow the method 3 in this thread. MPF 2.0.1 doesn't work very well with El Cap. I had the same experience as you had with MPF.
 

fnatix

macrumors newbie
Feb 18, 2018
2
0
OS X El Capitan (10.11) on Unsupported Macs

macOS Extractor and MacPostFactor are apps that guide you through patching and installing OS X El Capitan (10.11), Yosemite (10.10), Mavericks (10.9), or Mountain Lion (10.8) on your older Mac. This thread focuses on OS X El Capitan.

MacPostFactor works for Mountain Lion, Mavericks, Yosemite, and El Capitan.
Please note that older GPU (GMA 950, X3100, X1600, X1300, X1900, 7300gt, etc.) Graphics Acceleration on Mavericks, Yosemite, and El Capitan are not supported yet.
Installing on these models may cause them to have graphical issues as stated in these pages. Kexts are provided to help a little bit.
macOS Extractor is somewhat for more advanced users and should only be used as an alternative to MacPostFactor. This thread consists of members prominent in these patches that can help you solve your issues. Please do not hesitate to post if you have questions.


OSXHElCapMacAir.png
Apple History

OS X 10.6 Snow Leopard was the first OS X version with optional support for a 64-bit kernel, allowing booting either with a 32-bit or 64-bit kernel. However, Apple did not support booting the 64-bit kernel in Macs that shipped with EFI32 firmware, even if they had 64-bit processors capable of running the 64-bit kernel. When Apple dropped the 32-bit kernel entirely from OS X, starting with OS X 10.8 Mountain Lion, EFI32 Macs no longer had an Apple-supported mechanism to boot newer OS X versions.
OS X 10.11 El Capitan includes rootless security. It makes sure that System file permissions are automatically protected, and updated during Software Updates. The Repair Permissions function is no longer available and access to system files that we need to use in this guide may be locked.

Fortunately, we have found workarounds for this version of OS X. Here we provide guides in Post 1 in support for Installing OS X El Capitan on your Unsupported Mac.

This first post is usually updated with recently summarized information, updates, and more solutions.

For those who have 2006/2007 Mac Pros, you may be best suited to using Mr. Zarniwoop's Guide here. The MCPF and macOSE projects are not affiliated with them. We will not contact them for you either, that's your responsibility. Some confrontation has occurred both publicly and privately in MacRumors, the site, and other forms of communications and we don't want anything to do with them and their Mac Models. Its simple, don't ask Mac Pro questions to people who don't have Mac Pros :p. Your post will be requested to be moved to their thread.

Prerequisites:
Tested Macs listed below. Here are the minimum requirements:
- Running 10.7 Lion
- At least 2GB of RAM
- A copy of the OS X El Capitan Installer in Applications Folder (.app file from Mac App Store preferred)
- 15 GB of free space from USB or HDD Partition to serve as your Installer Drive.

-MacBook2,x
-MacBook3,x
-MacBook4,x
-MacBookPro2,x
-MacBookAir1,1
-MacMini1,x with C2D
-MacMini2,x
-iMac4,x with C2D
-iMac5,x

-MacPro1,x
-MacPro2,x

We DON'T assist with Hackintosh. All private messages/emails involving installing OS X on non-Apple hardware will be redirected to another support team.

Guide to Installing OS X El Capitan on Unsupported Macs

ANY HARM OR DAMAGE CAUSED BY THIS GUIDE HAPPENED UNDER YOUR OWN RESPONSIBILITY!

Be sure to have root privileges (administrator password) as OS X will prompt you for this on some stage.


A: Preparing The Installation Drive
  1. Make a BACKUP of your system if you can.
  2. macOS Extractor has generally everything you need to patch OS X (There are also numerous other sources that can help).
  3. Get an OS X El Capitan Installer App (Recommended from the Mac App Store)
  4. Make sure your Mac meets the minimum requirement above
  5. A USB or Secondary Partition to put the patched Installer (A Installation Drive for reference)

B: Start Patching

  1. Install macOS Extractor.
  2. A new drive might appear on your Desktop called ‘OS X Install ESD’. Don’t worry about that. The AutoPatch Tool will unmount that when it's done.
  3. Go to Applications/OS X Hackers Patch Files and run the AutoPatch package.
  4. During the AutoPatch installation. Select the USB or partition (Installation Drive) that you want as the installer. (No, this is not the Mac OS X Install ESD) WARNING: DO NOT SELECT YOUR CURRENT PARTITION (i.e Macintosh HD)
  5. (for non 64 bit Macs) Unlock and Replace the boot.efi files located in /System/Library/CoreServices and /usr/standalone/i386 with the copy provided in /Applications/OS X Hackers Patch Files/Boot EFI/ or from here . To Unlock it, use the Terminal app in Applications/Utilities/ and enter the command:
    Code:
    sudo chflags nouchg /Volumes/[Installation Drive Name]/System/Library/CoreServices/boot.efi

    (If you receive an error, go the that directory and find the boot.efi. Then in the Terminal, enter 'sudo chflags nouchg ' and drag the old boot.efi in the window. Press Enter)
  6. Now lock the new boot.efi file. (for non 64 bit Macs) lock the new boot.efi with this command:


  7. Code:
    sudo chflags uchg /Volumes/[Installation Drive Name]/System/Library/CoreServices/boot.efi


C: Installation
  1. Reboot your Mac holding option (alt) key
  2. Select the Installation drive "OS X Base System" (and press enter)
  3. If the Installation Drive boots you back to the main partition, try blessing the drive from your terminal app:
    Code:
    sudo bless --folder /Volumes/[Installation Drive Name] --file /Volumes/[Installation Drive Name]/boot --setBoot
  4. when booted click install/continue until you reach the disk selection menu, select your main drive (probably Macintosh HD) if you are sure about it, else select another empty drive (at least 15GB for testing/bigger if it should be a secondary system)
  5. After Installation, open the terminal in the menu bar and launch the PostInst.sh script to patch the partition where you installed OS X
Code:
sudo ./PostInst.sh

D: If Reboot Fails

If the Mac does not reboot to the El Capitan desktop, boot to the installation drive again and perform the following.
Boot back into the El Capitan Install Partition, open the terminal at the top menu bar or boot into single user mode (Hold Command-S immediately after turning on) enter:
Code:
sudo rm /Volumes/[Main Drive Name]/System/Library/CoreServices/PlatformSupport.plist


E: Installing the 64bit-Kexts from the Kexts folder from macOS Extractor
(These will better the graphics by a little but you will not have Graphics Acceleration. Still in beta so they may not work well)
  1. ensure that the System Integrity Protection is disabled
  2. Navigate in your Finder and go to the 'OS X Hackers Patch Files' folder in your Applications Folder
  3. Open the 'Kexts' Folder
  4. Choose your Graphics Card Kext Installer and launch it.
  5. Select the Partition or Hard Drive that you are currently using the patched OS X.Install it. (Admin privileges required)
  6. Restart your Mac
IF your Macbook can't wake up from sleep:

Because of lack of working Graphics Acceleration. Your Macbook may not be able to wake from a display sleep

If your Macbook can't wake up from sleep:

Because of lack of working Graphics Acceleration. Your Macbook may not be able to wake from a display sleep

Install the NoSleep Extension
Set the Preferences to Never Sleep on AC Adapter and Battery
Check the 'Start NoSleep Utility on system startup' setting
Your Macbook screen will never turn off unless you actually shut down your Macbook.

CONGRATULATIONS!!!

Method 2 - MacPostFactor
El Capitan Install is EXPERIMENTAL. Try this on a secondary partition.

El Capitan can be installed on all computer but ONLY Mac Pros WITH AN UPGRADED GRAPHICS CARD can use graphics acceleration as of now!

Requirements for MacPostFactor to work

  • A Mac with Core 2 Duo or Xeon Processor.
  • OS X 10.6 or later
  • 2GB RAM at least
  • At least 20GB of HDD space (8GB for USB)
  • Install OS X El Capitan.app with beta 1 or later in your Application Folder
  • Read our instructions on MacRumors at least twice

Friendly reminder.

We're not responsible if you screw up your system. Technically, that won't happen as you can always go back to Lion, Mountain Lion, Mavericks or Yosemite


Instructions — Installing directly on this computer
  1. Make sure you have Install OS X El Capitan.app in your Application Folder
  2. Select "On this computer" on the main MCPF window. Then, choose the partition you want to install El Capitan on.
  3. Click install and prompt your password.
  4. Click reboot. Your computer should reboot with the OSXHackers logo.
  5. Once booted, Click Continue, Agree and choose the only partition showed.
  6. Click reboot when you see "Installation succeeded!".
  7. Enjoy!

Instructions — Installing via USB
  1. Make sure you have Install OS X El Capitan.app in your Application Folder
  2. Select "On an external drive" on the main MCPF window. Then, choose the disk you want to install the El Capitan installer on.
  3. Click install and prompt your password.
  4. Click exit. Boot the computer you want to install El Capitan on with 'alt' held and select your USB drive.
  5. Once booted, Click Continue, Agree and choose the partition you want to install El Capitan on.
  6. Click reboot when you see "Installation succeeded !".
  7. Enjoy!


OS X Recovery Patch

  • Go to Applications/OS X Hackers Patch Files/Recovery Patcher/
  • Install the 'Recovery Patcher' pkg (Not working for El Capitan)

OS X Software Updates

  • Go to Applications/OS X Hackers Patch Files/Software Update Patch/
  • Install the 'Software Update Patch' pkg
  • (EFI32 Mac only) Using Pike's Boot.efi, Install the EFI Daemon patch.

Animation Disabler


You don't have Graphics Acceleration, right? Then you don't need excess Animation slowing down your system.
  • Go to Applications/OS X Hackers Patch Files/Animation Disabler/
  • Install the 'Disable Graphical Animations' pkg

Airdrop
  • Go to Applications/OS X Hackers Patch Files/AirDrop Enabler/
  • Open the 'Enable Airdrop' shell script in the Terminal
  • Restart

You can send a file with AirDrop to other Macs only. Sometimes newer Macs can't find your model.

Method 3 v3 - @skyfly555's method
Try this method on an external HDD. The method has been updated to v3 and successfully tested on MB 2,x, MB3,x and MBP 2,x. It can work on eventually all the other EFI32/EFI64 unsupported Macs if you have the kexts you need, although method 3 v3 is recommended for EFI32 Macs; and method 3 v2 in post #926 is recommended for EFI64 Macs.
Note: You can find the method 3 v1 in post #892 of this same thread, but it's obsolet


Prerequisites: A computer with El Capitan installed and SIP disabled (or a computer with Yosemite and -no_compat_check kext-dev-mode=1 boot flags in /Library/Preferences/SystemConfiguration/com.apple.Boot.plist), and an external HDD.

1- First of all, you need an external 2,5” HDD or SSD. It has to be GUID HFS+ formatted. If you format it from El Capitan, it formats the hard disk in this way by default. I will suppose its name is "Capitann". This will create a HFS+ partition and an EFI partition automatically.

2- Using the computer with El Capitan/Yosemite installed, clone the partition where you have El Capitan to your external HDD, the one you have formatted on step 1. The source computer can be a real Mac, or even a Hackintosh. You can use Carbon Copy Clone (CCC) or SuperDuper! I have used both of them and they worked well.
If you use El Capitan, you need SIP disabled. To do that, boot from your El Capitan Mac from Recovery Partition, go to utilities, open a terminal, and write csrutil disable and reboot. You need to do all the next steps from a El Capitan with SIP disabled. Yosemite doesn't need this, because it doesn't have SIP.

3- Boot.efi we need. There are two possibilities:
If you have an EFI64 unsupported Mac (like MB4,1, for example), you can use the EFI64 boot.efi El Capitan has got by default. You should follow, as mentioned, method 3 v2.

If you have an EFI32 Mac, you need this boot.efi, designed to always disable SIP, created by @skyfly555 , taking as base the boot.efi created by @vsbalint70 , who created his boot.efi modifying the code from Pike R Alpha original boot.efi.

Once downloaded, we need to change flags. From terminal (remember I'm supposing your Capitan partition is called "Capitann"):

Code:
cd /Volumes/Capitann/System/Library/CoreServices/
sudo chflags nouchg boot.efi
cd /Volumes/Capitann/usr/standalone/i386/
sudo chflags nouchg boot.efi

4- From Finder, use the "Go" menu and select "Go to folder..."
Open /Volumes/Capitann/System/Library/CoreServices/ and copy there the EFI32 boot.efi from where you have it (probably your Downloads folder).
Important: If you find here a file called firmware.scap, you must delete it and empty trash.
Open /Volumes/Capitann/usr/standalone/i386/ and do the same.
Important: If you find here a file called firmware.scap, too, you must delete it and empty trash.

We will assign the correct owner to them. From terminal:
Code:
cd /Volumes/Capitann/System/Library/CoreServices/
sudo chown root:wheel boot.efi
cd /Volumes/Capitann/usr/standalone/i386/
sudo chown root:wheel boot.efi

5- We need kexts. We are using tones of kext from TMRJIJ - OS X Hackers. To make things easy, you have them all zipped here (all the kexts come from OS X Hackers). Download it, unzip the file, you will get some folders and one kext, copy the kexts you need (EC-Base-kexts are mandatory, LegacyUSBInjector.kext is optional and is used only if you have some known USB issues, copy the graphical kexts you need from its folder) into /Volumes/Capitann/System/Library/Extensions/.

Note 1: If you have cloned from a Hackintosh, check your kexts into /Volumes/Capitann/System/Library/Extensions/ and /Volumes/Capitann/Library/Extensions/. Maybe you have things you don't need. Some of them can give you problems, for example, AppleACPIPS2Nub.kext, ApplePS2Controller.kext, FakeSMC.kext, NullCPUPowerManagement.kext or some HDAEnablerx.kext or whatever, that is "very Hackintosh". If you have these kexts in these folders, remove them now.
Note 2: If you have an ATI graphics card, to get the 128 MB of RAM recognised, you have to go into /Volumes/Capitann/System/Library/Extensions/ and delete this file: AMDSupport.kext


6- Before doing step 7, you need to be sure you have an important folder, which is not always cloned.

Open in Finder /Volumes/Capitann/System/Library/Caches/ Do you have com.apple.kext.caches/ folder?
If not, open /System/Library/Caches/ in another window of the finder, and drag and drop com.apple.kext.caches/ from /System/Library/Caches/ to /Volumes/Capitann/System/Library/Caches/.

After that, open a terminal and:

Code:
cd /Volumes/Capitann/System/Library/Caches/
sudo chown -R root:wheel *.*

Note: If you don't have com.apple.kext.caches/, in step 9 you can get a message like:

Can't create /Volumes/Capitann/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.l9a9 - No such file or directory and El Capitan won't boot.

7- Now we will set boot flags and use them every time we boot. From terminal:
Code:
cd /Volumes/Capitann//Library/Preferences/SystemConfiguration/
sudo nano com.apple.Boot.plist

You will see:
<key>Kernel Flags</key>
<string></string>


You want to have:
<key>Kernel Flags</key>
<string>-no_compat_check kext-dev-mode=1 mbasd=1</string>


Or, if you want verbose mode, too, add -v flag:
<key>Kernel Flags</key>
<string>-no_compat_check kext-dev-mode=1 mbasd=1 -v</string>

Note: we need these flags, they are mandatory to have all the kexts loaded, excepting mbasd=1, that is only required by MBAirs.

To go out from nano editor, Ctrl+X and say "y".

8- Now we want to have our kexts permissions in good condition. From terminal:
Code:
cd /Volumes/Capitann/System/Library/Extensions/
sudo chown -R root:wheel *.*
sudo chmod -R 755 *.*
Note: These commands sometimes fail. Check them typing
Code:
ls -l
from terminal and be sure you see root:wheel everywhere. If that's not the cause, you need to go to Finder, select your external HDD, and tick/untick the option "Ignore ownership on this volume" (Right click on volume > Read info > Option below permissions) - if it's ticked, untick it; it it's unticked, ticked it. Although when you get your permissions changed to root:wheel, you need the "Ignore ownership on this volume" option unticked.


9- Now we are going to build the prelinked kernel and kernelcache:
Code:
sudo kextcache -prelinked-kernel /Volumes/Capitann/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache -K /Volumes/Capitann/System/Library/Kernels/kernel /Volumes/Capitann/System/Library/Extensions /Volumes/Capitann/Library/Extensions

The terminal should give you messages like these:
/Volumes/Capitann locked; waiting for the lock.
Lock acquired; proceeding.
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext IOUSBHostFamily.kext

(...)
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleStorageDrivers.kext
kext-dev-mode allowing invalid signature -67050 0xFFFFFFFFFFFEFA16 for kext AppleIntelIntegratedFramebuffer.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleIntelGMA950.kext

(...)
AppleDataSetManagement.kext - dependency for com.apple.iokit.IOAHCIBlockStorage lacks valid OSBundleCompatibleVersion.
AppleDataSetManagement.kext is missing dependencies (including anyway; dependencies may be available from elsewhere)
Created mkext archive /Volumes/Capitann/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.

Note 1: AppleDataSetManagement.kext messages will be shown if you have an SSD and TRIM enabled.
Note 2: If you get messages saying permissions are not correct, or omitting... repeat steps 5, 6 and 8 until you get these messages saying "kext-dev-mode allowing invalid signature..". Be sure you are doing all the steps (especially the terminal commands) correct, and in the correct order. If you have an ATI, and have deleted AMDSupport.kext, you will get some "omitting from prelinked..." messages, it's ok.
Note 3: If you get a message saying "Can't create...", do the step 6 again, it hasn't been done.


Note 4: if you are on a Hackintosh, you can get messages like:
SoftRAID.kext has incorrect permissions; omitting.
(...)
ACS6x.kext has incorrect permissions; omitting.
Some of these kexts are from Hackintosh and will not be needed. Other ones, like HandsOff.kext, can be from some app you have installed. Be sure you are not omitting something important, as the kexts the prior command has loaded (AppleHDA.kext or similar), and don't care for the rest.

10- Now we can change flags to boot.efi, and protect it again. From terminal:
Code:
cd /Volumes/Capitann/System/Library/CoreServices/
sudo chflags uchg boot.efi
cd /Volumes/Capitann/usr/standalone/i386/
sudo chflags uchg boot.efi

11- Now El Capitan can boot and it should boot with SIP disabled, but we have to be sure there's no firmware.scap into the EFI folder on our Capitann partition. If this is case, El Cap won't boot at all (and we will get Kernel Panic).
Go to terminal, type diskutil list, and check the name of your EFI partition. If it's internal, it's usually called disk0s1; if it's external, it can be called disk1s1 or disk2s1. If you see several EFI partitions, do this step with all of them. I'll do that with disk0s1 as an example. You can do the same several times just changing the name of the disk to diskXs1.
So, we will mount the EFI partition of our internal HDD (it's called disk0s1). We will name it "ESP".
From terminal:
Code:
mkdir /Volumes/ESP
sudo mount -t msdos /dev/disk0s1 /Volumes/ESP
Now go into /Volumes/ESP from Finder (maybe it will be called EFI on Finder sidebar). Go into the folder called EFI. Delete everything inside this EFI folder (/Volumes/ESP/efi/) and empty trash. If you see an Apple folder, you have the firmware.scap there, you must delete it!

USB Issue: The USB kexts we are using could give you a trouble, depending on the machine you have. One USB could not be recognised, Check your USB ports using an USB memory stick after booting El Cap for the very first time to know if you are affected by this issue. If this is the case, try leaving the USB stick in the not recognised port, reboot again, and check if, after rebooting, the USB stick is recognised. If it's recognised, you will have to boot El Cap with some USB device connected on that USB port when booting to have it working with El Cap (not all the time, only while you are booting). You can try installing LegacyUSBInjector.kext, maybe it can help you.
Brightness adjustment: Shady app can help you. It's included in the OS X Hackers graphical kexts installers.


12- Boot your Mac, pressing the "alt" key" and select Capitann partition. If you have followed all the steps, it will boot.

13- The final check.
Once booted from El Cap on your unsupported Mac, open a terminal and type:
Code:
csrutil status
You should get this message: System Integrity Protection status: disabled.
And the last check, from the terminal, let's rebuild caches:
Code:
sudo kextcache -i /
You should see the same output you got when you did step 9.
Great. You got it. Welcome to EC.

Important notes about updating-upgrading and cloning:
1- If you do a major upgrade, for example, from El Cap 10.11.5 to 10.11.6 or similar, you will get all the kexts we added to /System/Library/Extensions in step 5 deleted, boot.efi deleted, the firmware.scap file will reappear everywhere... So, I recommend you having a bootable backup on an external HDD before upgrading anything, and be sure it boots correctly; so, after the upgrade, you can boot from there and repeat the process, from steps 3 to 12.
Your three goals: reinstalling the correct boot.efi, reinstalling kexts with the correct kext cache and prelinked kernel rebuilding, and deleting firmware.scap from your system again.
So, and basically, you will repeat m3v2, but not with another machine, but with yours.
2- When you clone El Cap partition to your internal HDD, El Cap may not boot. If this is your case, do steps 6 and 9 booting from your external drive. Then, your internal El Cap will boot.



Support

Feel free to post your questions, concerns, or success stories in this thread. If you can’t post us back because your only usable device is bricked, Skype at TMRJIJ, MLforAll, or email us at Support@OSXHackers.net. We'll try to respond within 3-5 days.
There should be some great support Applications that we will use to help you.

Be sure to thank our awesome developers who have contributed greatly.

Support Documentation (Construction)

Docs for macOS Extractor:
Docs for MacPostFactor:

Downloads/Files for Patching

The macOS Extractor v1.42 for Mountain Lion, Mavericks, Yosemite, El Capitan, and Sierra [May 31, 2017]:
Download Link
View Release Notes

MacPostFactor 2.0.1 [July 8, 2016]:
Download Link


Boot.efi support for El Capitan (OS X 10.11) for unsupported Mac hardware with a 32-bit only EFI [by Pike R. Alpha]:
Download Link


OS X Hackers are is not affiliated with Apple Inc. Mac OS Ten (X), Mac, iOS, iPhone, iPad, and all other Apple product names are trademarks or registered trademarks of Apple Inc. All other company and product names are trademarks or registered trademarks of their respective companies.
MacPostFactor was made by Wayne Wong (@Wayne_819) and Kelian Dumarais (@MLforAll)

Guide and OSXH site/app designed by Isiah Johnson (@TMRJIJ) and Robby Sharpero and is provided by Johnson Network.

Developers/Contributors:

Liem Mai, Birtha Åbel, Wayne Wong, Kelian Dumarais, Nolen Johnson, Mr. Zarniwoop, Tiamo, Pike R. Alpha, oem, atvusr, Jesse Samluk, Mike Hennessie

Terms and Conditions
OS X Hackers Site
Facebook Page
Donate

Successful?

Support us by sharing our guide to others. Let everyone know that their older Macs are not obsolete yet. Thank the developers who helped make this possible. Some Developers also appreciate donations to help make this site/app better.

Other Threads:



osxhfullblack.png

I tried method 3 on my MB2,1 without any success :( My external SSD with a Copy from El Capitan 10.11.6 wont boot, got a the apple logo, and after 10 seconds my MB reboots. Any Idea?

Edit: I did copy a fresh installed El Capitan from the App Store and now its working perfectly on my MB2,1 from Mid 2007 - Great! Thanks for the great Guide :)
 
Last edited:

teepisutt

macrumors newbie
Sep 17, 2012
11
0
Hi,

I have an iMac5,1(Late 2007) Core 2 Duo with 2 GB RAM. From what I've read, it should met the requirement using method 3v3. I have read through the method and about to gather material to perform such tasks but I'd like something.

And here is what I'd like to ask . If I using Method 3 then will it be installed internally? or I'll have to use an external drive forever to use el capitann.

If I successfully installed el capitan, will I be able to use program like Skype?

Thanks!!
 

zappaesque

macrumors member
Jun 10, 2017
73
60
Hi,

I have an iMac5,1(Late 2007) Core 2 Duo with 2 GB RAM. From what I've read, it should met the requirement using method 3v3. I have read through the method and about to gather material to perform such tasks but I'd like something.

And here is what I'd like to ask . If I using Method 3 then will it be installed internally? or I'll have to use an external drive forever to use el capitann.

If I successfully installed el capitan, will I be able to use program like Skype?

Thanks!!

You can always start your iMac in Target Disk Mode, use a firewire 400 cable to connect it to a supported Mac, and do all of your work that way. The iMac, in essence, becomes an external firewire drive, and you won't have to take your iMac apart to replace the drive. That's how I installed it on three different Macbooks.

Not sure about Skype, since I don't use it.
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
You can always start your iMac in Target Disk Mode, use a firewire 400 cable to connect it to a supported Mac, and do all of your work that way. The iMac, in essence, becomes an external firewire drive, and you won't have to take your iMac apart to replace the drive. That's how I installed it on three different Macbooks.

Not sure about Skype, since I don't use it.

I can't find the supported Mac that still suport firewire400 though. Even If I could manage to find a cable, still, need to find the adapter(thunderbolt perhaps?).

What other options do I have?
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
I can't find the supported Mac that still suport firewire400 though. Even If I could manage to find a cable, still, need to find the adapter(thunderbolt perhaps?).

What other options do I have?

Look like I need a Thunderbolt - Firewire 800 Adapter Then looking for Firewire 800 to Firewire 400 cable

Am I correct?
 

zappaesque

macrumors member
Jun 10, 2017
73
60
Look like I need a Thunderbolt - Firewire 800 Adapter Then looking for Firewire 800 to Firewire 400 cable

Am I correct?

That would probably do it. I cannot confirm this as I haven't tried it. I have a 2017 Macbook Pro and only a USB dongle, and it's too new to run El Cap. I used my 2009 MBP, and just swapped hard drives to install El Cap.
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
That would probably do it. I cannot confirm this as I haven't tried it. I have a 2017 Macbook Pro and only a USB dongle, and it's too new to run El Cap. I used my 2009 MBP, and just swapped hard drives to install El Cap.

But you use Macbook Pro 2017 to install el cap in other machines?

Could you tell me your process again please.

Second question in case I can't find any cable. If I take the harddrive out of old iMac . Then, put it in HDD Docking storage and connect to el cap machines. Then, I follow method 3v3 and put the formatted HDD back into the old iMac and it should do the same trick right?

Thanks
 

zappaesque

macrumors member
Jun 10, 2017
73
60
But you use Macbook Pro 2017 to install el cap in other machines?

Could you tell me your process again please.

Second question in case I can't find any cable. If I take the harddrive out of old iMac . Then, put it in HDD Docking storage and connect to el cap machines. Then, I follow method 3v3 and put the formatted HDD back into the old iMac and it should do the same trick right?

Thanks


No. I use my 2009, which IS supported, to install El Cap.

There are a couple of different ways that you can connect the drive to another machine and do your terminal work following method 3v3. You can remove your drive from your iMac, connect it to a supported machine via USB, install El Cap, and do your terminal work in the supported machine, then install the drive back in the iMac. You can also connect via firewire from a supported machine to an unsupported machine and do it that way. I installed my drive into my 2009, installed El Cap, then connected my Mac Pro to it via firewire and did my terminal work that way.
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
No. I use my 2009, which IS supported, to install El Cap.

There are a couple of different ways that you can connect the drive to another machine and do your terminal work following method 3v3. You can remove your drive from your iMac, connect it to a supported machine via USB, install El Cap, and do your terminal work in the supported machine, then install the drive back in the iMac. You can also connect via firewire from a supported machine to an unsupported machine and do it that way. I installed my drive into my 2009, installed El Cap, then connected my Mac Pro to it via firewire and did my terminal work that way.


I did it!! Thank you!!

It’s running on El Capitann now, however, there might be something wrong with the graphic. When I try open video on youtube, the video is lagging( refreshing frame in the video is like 1 frame per second of some sort) while the audio is fine. Is this is somesort of known issues?
 

swamprock

macrumors 65816
Aug 2, 2015
1,261
1,837
Michigan
I did it!! Thank you!!

It’s running on El Capitann now, however, there might be something wrong with the graphic. When I try open video on youtube, the video is lagging( refreshing frame in the video is like 1 frame per second of some sort) while the audio is fine. Is this is somesort of known issues?

What does your About This Mac say with regards to the video memory? If it says something like "6mb", then your video kexts aren't properly installed. Take a screenshot of your About This Mac and paste it here, and we'll see if that's causing your video issue.
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
What does your About This Mac say with regards to the video memory? If it says something like "6mb", then your video kexts aren't properly installed. Take a screenshot of your About This Mac and paste it here, and we'll see if that's causing your video issue.

Nah... I think I did choose my kexts correctly though. I did install skype and jt gave back bizarre output. When I was doing video calls both my and opponent video turn black. But the cam is still working, the opponent can see my video perfectly. Just this old imac side that can’t see anything even my own camera. But it only happened in video calls, when I setting my camera or doing video message everything working perfectly.

This happen on Skype 7. For Skype 8, after install its show blank log in screen.
 

Attachments

  • 21E884C1-D908-4005-8696-287A054D461E.jpeg
    21E884C1-D908-4005-8696-287A054D461E.jpeg
    1.2 MB · Views: 418

swamprock

macrumors 65816
Aug 2, 2015
1,261
1,837
Michigan
Nah... I think I did choose my kexts correctly though. I did install skype and jt gave back bizarre output. When I was doing video calls both my and opponent video turn black. But the cam is still working, the opponent can see my video perfectly. Just this old imac side that can’t see anything even my own camera. But it only happened in video calls, when I setting my camera or doing video message everything working perfectly.

This happen on Skype 7. For Skype 8, after install its show blank log in screen.

Ah ok. I'm not familiar with El Cap installs on that particular iMac and video chip. It could just be a peculiarity with that combination.
 
  • Like
Reactions: zappaesque

zappaesque

macrumors member
Jun 10, 2017
73
60
Ah ok. I'm not familiar with El Cap installs on that particular iMac and video chip. It could just be a peculiarity with that combination.

I think there are some known issues with unsupported El Capitan installs and unaccelerated video, which is what is probably causing the issues @teepisutt is experiencing. I also have not used Skype, but I've had no problems with YouTube under unsupported El Capitan except with any 60fps videos (720p60 and up). Maybe try some non-60fps videos, @teepisutt
 

teepisutt

macrumors newbie
Sep 17, 2012
11
0
I think there are some known issues with unsupported El Capitan installs and unaccelerated video, which is what is probably causing the issues @teepisutt is experiencing. I also have not used Skype, but I've had no problems with YouTube under unsupported El Capitan except with any 60fps videos (720p60 and up). Maybe try some non-60fps videos, @teepisutt

I have done some more troubleshooting. The Youtube video lagging only appeared when doing full screen mode, espescially when the ads pop-up is appearing or move my cursur around. If play full screen with nothing distrurbing it went fine.

About the Skype, I have also try other video calls application. Amazingly, samething happen the live video won't show but the other side of the line can see live vid of iMac. So I think the problem is in the video codec of some sorts.
 

X-Housed

macrumors newbie
Mar 22, 2018
18
8
I have video issues as well. When i open a 4K or a Full HD Video in Youtube i have massive Framedrops in the first minute of the video. After a while the frame losses get less. Buffer and Networkconnectivity are ok. In the activity monitor i see the VTdecoderXPCservice taking over 100% CPU.
I tested it with Firefox and Chrome with the same result (in Chrome it's the Chromehelperservice).
The same Videos are running smoove on the same machine in Windows 10 Bootcamp with Firefox (VP8&VP9 fully supported). I know that Apple don't support VP9 so the codec and resolution changes to .m4a 1080p but that should not be a problem at all. I assume that the OS don't use Hardwareaccelaration of the GPU to decode the videos. Technically my Radeon 5770 GPU shoud display up to 4k resolutions. Do anyone experience the same issues and how can i make sure that hardwareaccelaration is turned on so i can get youtube running smooth?

My setup:
MacPro 1,1 flashed to 2,1 (2x Xeon 5355)
24GB RAM
Radeon Vapor-x 5770 (flashed with bootscreen and recognized by OS)
OS on SSD: 10.11.6 w. 2017-005 update -> fresh install
 

swamprock

macrumors 65816
Aug 2, 2015
1,261
1,837
Michigan
I have done some more troubleshooting. The Youtube video lagging only appeared when doing full screen mode, espescially when the ads pop-up is appearing or move my cursur around. If play full screen with nothing distrurbing it went fine.

About the Skype, I have also try other video calls application. Amazingly, samething happen the live video won't show but the other side of the line can see live vid of iMac. So I think the problem is in the video codec of some sorts.

Try installing Perian. That would take care of some of the missing codecs. Maybe that would help fix your issues...?
 

X-Housed

macrumors newbie
Mar 22, 2018
18
8
I have video issues as well. When i open a 4K or a Full HD Video in Youtube i have massive Framedrops in the first minute of the video. After a while the frame losses get less. Buffer and Networkconnectivity are ok. In the activity monitor i see the VTdecoderXPCservice taking over 100% CPU.
I tested it with Firefox and Chrome with the same result (in Chrome it's the Chromehelperservice).
The same Videos are running smoove on the same machine in Windows 10 Bootcamp with Firefox (VP8&VP9 fully supported). I know that Apple don't support VP9 so the codec and resolution changes to .m4a 1080p but that should not be a problem at all. I assume that the OS don't use Hardwareaccelaration of the GPU to decode the videos. Technically my Radeon 5770 GPU shoud display up to 4k resolutions. Do anyone experience the same issues and how can i make sure that hardwareaccelaration is turned on so i can get youtube running smooth?

My setup:
MacPro 1,1 flashed to 2,1 (2x Xeon 5355)
24GB RAM
Radeon Vapor-x 5770 (flashed with bootscreen and recognized by OS)
OS on SSD: 10.11.6 w. 2017-005 update -> fresh install

Tested with a nVidia 680GT 2GB OSX and Web Driver, frames dropped brutally in youtube/safari.
Video 1080p@30fps
Would be nice if someone with the same or similar configuration can confirm that youtube videos are working smooth or not.
 

okmacok

macrumors newbie
Apr 9, 2018
11
0
Paris, France
Hello,

I have this mac with a 64 bit processor :
https://everymac.com/systems/apple/...-core-2-duo-2.16-white-13-mid-2007-specs.html
Everymac.com learnt me I could have a 64 bit EFI.

Then I read in the method 3 from page 1 :
"3- Boot.efi we need. There are two possibilities:
If you have an EFI64 unsupported Mac (like MB4,1, for example), you can use the EFI64 boot.efi El Capitan has got by default. You should follow, as mentioned, method 3 v2.

If you have an EFI32 Mac, you need this boot.efi, designed to always disable SIP, created by @skyfly555 , taking as base the boot.efi created by @vsbalint70 , who created his boot.efi modifying the code from Pike R Alpha original boot.efi."

My question is :
Do I have EFI32 or EFI64 Mac ?

rEFInd tells me I have 32bit but Everymac tells me I have 64bit :eek:
 
Last edited:

TimothyR734

macrumors 68030
Apr 10, 2018
2,723
2,753
Logsden Oregon
Most Macs 2006 or newer are 64 bit but you can go to Macupdate website and download 32-or64 bit kernel mode selector once install it will tell you if you have a 32 bit or 64 bit processor, same with your efi it will tell you if your macOS kernel is set to boot in 32 or 64 or if Apple allows for booting in 64
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.