PowerSupport's Anti Glare protector?

[clayj]

What led you to change from sgp? Between the two I was leaning toward sgp. I still think these are way overpriced and am looking at trying some much less costly versions.

It wasn't so much being personally dissatisfied with the SGP as it was just wanting to compare the two different films. There have been a lot of comments back and forth about which one is better. I've always used Power Support film on my iPhones and iPod Touch, but I got the SGP film for the iPad first because it was the first one I read good comments about.

 

[awonder]

I just ordered the Power Support Anti-Glare.

When you guys installed the film, did you align it at the top of the screen and then drop the film down, towards the home button at the bottom? Or do you align it at the side of the screen instead? Just wondering what works best.

Thanks in advance for any advice!

 

[mcdj]

Plus, I am very confident that the screen is protected from scratches and wear of the olephobic coating (according to the iPad User Guide this coating dimishes over time).

Protecting the oleophobic coating is a pretty silly reason to use a screen protector. If you always use a screen protector you will never need the coating.

That said, I picked up a 2 pack of Speck anti glares, for the same price as one Power Support. I do see a tiny bit of softening of the screen, on text mostly, but it far outweighs the annoyance of constant fingerprints. I have used Power Support ant glare on all 3 versions of my iPhone and I can say unequivocally that the Speck protectors are as good if not a bit better, as the seem to be a tad thinner than the PS.

 

[brn2ski00]

i am sure its the same as the iPhone version.

i have used both for my iPhone and they rock! highly recommended....

 

[macrobat]

spent $32 and got dust in the shield and wasted it CRAP! had to order a new one i hate putting these on easy on a iphone pain in the arse on an ipad.

 

[iPad1iPad]

Protecting the oleophobic coating is a pretty silly reason to use a screen protector. If you always use a screen protector you will never need the coating.

That said, I picked up a 2 pack of Speck anti glares, for the same price as one Power Support. I do see a tiny bit of softening of the screen, on text mostly, but it far outweighs the annoyance of constant fingerprints. I have used Power Support ant glare on all 3 versions of my iPhone and I can say unequivocally that the Speck protectors are as good if not a bit better, as the seem to be a tad thinner than the PS.

Read my post again. Protecting the coating is not the only reason I bought the screen protector...just one of a many.

And, protecting the oleophobic coating is not silly if you want to keep the iPad in new condition for resale.

 

[iPad1iPad]

spent $32 and got dust in the shield and wasted it CRAP! had to order a new one i hate putting these on easy on a iphone pain in the arse on an ipad.

How much dust? Small enough to have used transparent tape (rolled sticky side out on your finger) from the static side of the protector? I had some dust too and it was easy to remove.

 

[Hendjaz]

That said, I picked up a 2 pack of Speck anti glares, for the same price as one Power Support. I do see a tiny bit of softening of the screen, on text mostly, but it far outweighs the annoyance of constant fingerprints. I have used Power Support ant glare on all 3 versions of my iPhone and I can say unequivocally that the Speck protectors are as good if not a bit better, as the seem to be a tad thinner than the PS.

So how did the anti-glare function of the Speck work for you? Reduce the glare enough for you to comfortably read text or view pictures/video in the sun?

 

[mcdj]

So how did the anti-glare function of the Speck work for you? Reduce the glare enough for you to comfortably read text or view pictures/video in the sun?

it's decent. not perfect. I don't think the ipad is really ideal for outdoor use in bright sun period. glare aside, the screen isn't really bright enough to compete with bright sun.

 

[RaceTripper]

spent $32 and got dust in the shield and wasted it CRAP! had to order a new one i hate putting these on easy on a iphone pain in the arse on an ipad.

I did too, but just washed it with water and hand soap. You can always clean and reuse these films. No need to repurchase them because you trapped dust.

 

[xraytech]

spent $32 and got dust in the shield and wasted it CRAP! had to order a new one i hate putting these on easy on a iphone pain in the arse on an ipad.

You can clean it. I've cleaned one for my iPhone and it is flawless.

 

[macrobat]

How much dust? Small enough to have used transparent tape (rolled sticky side out on your finger) from the static side of the protector? I had some dust too and it was easy to remove.

i hate that i am reading this now. Well I know what to do for my next one, this is clever by the way good advice.

 

[LouieSamman]

I'm going crazy over if I should get the PowerSupport or the ClearCal for anti-glare.

ClearCal gives you two films and a cloth for $5 less than the PowerSupport Film

The PowerSupport gives you one film with no cloth for $5 more.

I'm guessing the PowerSupport is a better grade of film than the ClearCal.

Am I wrong on this?

 

[HelloMikee]

For all of you saying to just wash with hand soap and water for reapplication, how do you dry them? I would assume wipe dry would leave dust/particles. Do you just let it hang dry?

 

[alphaod]

Ordered a protector from Power Support as well, except mine came with what looked like cardboard shredding under film to begin with. A quick chat with Power Support and they sent me a new one. Stellar support D).

So I also ordered 2 more for back up. Since I just scratched mine already (yep it's a big scratch—but at least my iPad is safe!).

 

[xraytech]

For all of you saying to just wash with hand soap and water for reapplication, how do you dry them? I would assume wipe dry would leave dust/particles. Do you just let it hang dry?

DO NOT WIPE OR HANG DRY

Apply while wet and use a credit card to squeegee out the water and air bubbles. Just make sure you apply the correct side.

 

[macduke]

I purchased and installed this screen protector as I have used them on my iPhone, iPhone 3g, and iPhone 3GS. I thought I was about to go crazy until I got this thing in the mail. I do not like using the bare screen. My fingers catch too much on the oleophobic coating and with the protector they slide easily across the surface. In addition, I don't have to wipe it down all the time and the glare of surrounding objects is softened to the point of being trivial.

The device is a dream after installing this product. I couldn't believe how much better it felt and reacted. Now when I'm out in public I don't have to be embarrassed about my dirty oily screen that I have to rub on my shirt (belly) every 10 minutes. It's also much easier to draw on now, which is something I use it for a lot to do mockup drafts of assignments in class.

These is a slight fuzz to things when you look up close, but I find myself holding the iPad much further away from my face than an iPhone, and also find the benefits to outweigh this small shortcoming. I highly recommend this product, though its biggest downside is that it only comes with one! For $25 you'd think they could include two flimsy pieces of plastic. Also, at least for me, it was pretty trick to install. Make sure you turn off the A/C and let the air settle for awhile before applying. I wiped the screen clean several times using professional lens cleaner and microfiber cloth and there were still tiny pieces. Work quickly! And use scotch tape to grab the pieces trapped underneath. Use the scotch tape to pull the protector back up also. If you use your fingernails on the edges, it can bend it and it might not go back down flush. I learned this tip from a "genius" at the Apple Store. I can tell you from experience that this is true using iPhone versions.

Attached is an photo I snapped using my 3GS:

 

[Imsuperjp]

I just received mine and love it. The screen does loose some of it's pop but now I don't have to deal with fingerprints. If you prefer a matte laptop screen instead of a glossy one, then you will like this product. If you like glossy, then this isn't for you

 

[tljedi11]

I just received mine and love it. The screen does loose some of it's pop but now I don't have to deal with fingerprints. If you prefer a matte laptop screen instead of a glossy one, then you will like this product. If you like glossy, then this isn't for you

So would the PS crystal film be a better choice for the non-matte look? I am not certain on the difference between the anti-glare and crystal (besides the name)...

 

[steffi]

I have this on my iPad also but the best advise I can give is to use a ruler to press it down and slide the ruler as you're laying down on the iPad. This will give you a perfect install because the weight and thickness of the plastic is just right for it to go on smoothly.

I purchased and installed this screen protector as I have used them on my iPhone, iPhone 3g, and iPhone 3GS. I thought I was about to go crazy until I got this thing in the mail. I do not like using the bare screen. My fingers catch too much on the oleophobic coating and with the protector they slide easily across the surface. In addition, I don't have to wipe it down all the time and the glare of surrounding objects is softened to the point of being trivial.

The device is a dream after installing this product. I couldn't believe how much better it felt and reacted. Now when I'm out in public I don't have to be embarrassed about my dirty oily screen that I have to rub on my shirt (belly) every 10 minutes. It's also much easier to draw on now, which is something I use it for a lot to do mockup drafts of assignments in class.

These is a slight fuzz to things when you look up close, but I find myself holding the iPad much further away from my face than an iPhone, and also find the benefits to outweigh this small shortcoming. I highly recommend this product, though its biggest downside is that it only comes with one! For $25 you'd think they could include two flimsy pieces of plastic. Also, at least for me, it was pretty trick to install. Make sure you turn off the A/C and let the air settle for awhile before applying. I wiped the screen clean several times using professional lens cleaner and microfiber cloth and there were still tiny pieces. Work quickly! And use scotch tape to grab the pieces trapped underneath. Use the scotch tape to pull the protector back up also. If you use your fingernails on the edges, it can bend it and it might not go back down flush. I learned this tip from a "genius" at the Apple Store. I can tell you from experience that this is true using iPhone versions.

Attached is an photo I snapped using my 3GS:

 

[Indydenny]

I agree with the reviews: less glare, better feel, a little less sharp. These have been my favorite for the iPhone and now for the iPad.

One downside that I don't think has been mentioned. The use of a stylus is diminished a bit-- just doesn't work as easily or have the same sensitivity.

Application was a breeze!

 

[ngenerator]

For those who have installed the PS Anti-Glare or Crystal set: Does it work well with the Apple iPad Case? I guess I'm just asking because I frequently remove it and replace it in the case, and don't want to mess up the screen protector. Some days I like the feel of the naked iPad, some days I prefer the case on it. I'm hoping the case isn't too tight and effs up the screen protector (See: iPhone 3G/S+Incase Slider+screen protecor)

I just want to check if anyone's had any troubles with the two

 

[HelloMikee]

Just came in and couldn't wait to install.

It was a little easier than I thought it would be from reading everyone's comments. The hard part was actually getting the balls to start. I probably wiped my iPad clean several times before I began.

First time I installed, it was slightly off so by the time it reached the top right corner, it was misaligned slightly causing the screen protector to not stick all the way essentially creating a large "bubble" line. I could not live with that despite having ZERO dust particles trapped.

So I took scotch tape and peeled the corner off and started over. As I took it off, I saw dust land on the screen so I used tape to pick it up.

So anyway, I try it again and now it's aligned perfectly, however not as perfect as try #1 regarding dust particles.

I gotta say though, that you'd have to inspect the screen when it's off to actually see any dust. It's much worse seeing finger smudges from a mile away then it is to have to inspect to see the dust.

So dust in screen... not a huge issue. From reading here, I imagined pebble like sand caught between lol.

Now for the actual screen. Smudges are gone. FANTASTIC. Reading in the car, a joy. Clarity?! Well, at first it was a real disappointment.

Being a photographer and graphic designer, I was a little scared using this product considering it's my digital portfolio and I want the best clarity. I also understood the compromises and was willing to take a chance because I've used this same protector on the iPhone however have decided against after a few months because it wasn't as clear.

But the difference is, the iPhone takes a swipe to clean. The iPad? I'm scrubbing away because I cannot stand smudges.

Anyway, my disappointment went away after I realized I was at about 60% brightness. I cranked it up to 100% and am very happy.

I'm not longer a nazi about cleaning the screen. It's gorgeous on and off.

 

[Skystar]

Mine is waiting in the mailbox at home. Loved it for the iPhone, I'm sure the iPad version is no different.

 

[3goldens]

very happy with mine installed with no problems!