How to reattach imac 27 inch stand
Okay I transported my 2 imac 27 inch in suitcases on a plane. They way to reattach a imac stand when deattached is this.
Reassembly
1 Align the pin on the
clutch mechanism to
the central hole in the
stand.
2 Replace 8 T10 screws.
3 Place the computer
face down on a table
so that the base of
the stand extends
over the table edge.
Press the stand down
and insert an access
card into the slot
between the top of
the stand and the rear
housing.
4 Insert the access card
as far as it will go.
Gently lift the stand
approximately two
inches to unlock the
clutch mechanism,
and then remove the
access card. The
clutch mechanism
should now be
unlocked.
5 Stand the computer
upright.
Okay I transported my 2 imac 27 inch in suitcases on a plane. They way to reattach a imac stand when deattached is this.
Reassembly
1 Align the pin on the
clutch mechanism to
the central hole in the
stand.
2 Replace 8 T10 screws.
3 Place the computer
face down on a table
so that the base of
the stand extends
over the table edge.
Press the stand down
and insert an access
card into the slot
between the top of
the stand and the rear
housing.
4 Insert the access card
as far as it will go.
Gently lift the stand
approximately two
inches to unlock the
clutch mechanism,
and then remove the
access card. The
clutch mechanism
should now be
unlocked.
5 Stand the computer
upright.