Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

OldMacs4Me

macrumors 68020
Original poster
May 4, 2018
2,323
29,933
Wild Rose And Wind Belt
Recently dug out the flash I bought last June. See this post:
Pleasantly surprised that the batteries were still holding enough charge to get the six frames I needed to shoot.

However I am still shopping for a camera strap. Finally figured out why nothing I find is screaming: "Buy me." My old film days strap had several loops to hold film canisters. Realized I am looking for something with a pocket for a spare battery and one to hold a spare memory card. Found one but sadly it is made of neoprene which is not a great choice of materials. Interestingly quick connect snaps are not needed as I am using small carabiners with the Nikon strap. I much prefer that over having dangling ends when I am doing copy work and not using a strap.
 
Last edited:

mollyc

macrumors G3
Aug 18, 2016
8,064
50,719
Recently dug out the flash I bought last June. See this post:
Pleasantly surprised that the batteries were still holding enough charge to get the six frames I needed to shoot.

However I am still shopping for a camera strap. Finally figured out why nothing I find is screaming: "Buy me." My old film days strap had several loops to hold film canisters. Realized I am looking for something with a pocket for a spare battery and one to hold a spare memory card. Found one but sadly it is made of neoprene which is not a great choice of materials. Interestingly quick connect snaps are not needed as I am using small carabiners with the Nikon strap. I much prefer that over having dangling ends when I am doing copy work and not using a strap.
These are a little (maybe a lot) on the feminine side, but they do have a pocket. I like scarf style straps but don't have this brand.



you might like this one better:

 

Allen_Wentz

macrumors 68040
Dec 3, 2016
3,329
3,762
USA
I have very few slides as big prints was always my film interest. However my mom left me a very large supply of them. The results I am getting will allow me to dispose of those slides once I get them all digitized. What I am finding encouraging is that I am getting results that will allow me to digitize and sometimes print old negs and slides much more efficiently than via the scanner.
A no frills tripod that is definitely my favorite. Doesn't matter what they look like they get the job done. Mine gets very little use since the 4x5 went into storage, With todays smaller, lighter cameras coupled with the high ISOs that my Lumilux and even my little Oly TG-6 can use, almost all of my shots are hand held. Otherwise the light weight Slik Traveler can easily handle all three of these cameras, as long as I make sure the wind doesn't catch it.

The Z50 takes the ISO aspect to a new level. ISO 6400 shows minimal noise and for certain subjects I would even be willing to use 12,800. Having a long time hatred of grain I've set the ISO limit to 1600, but that's more or less personal taste.

As to keeping slide originals, there may be a dozen or two worth preserving. Thankfully 90+% of moms were on Kodachrome and have suffered almost no age degradation.

Did the post image processing on the color neg roll this afternoon. Once I had the routine down it went quickly. Results are certainly superior to prints a lab would have given me had I printed the roll back in 2004. It is important to look for the exposure where the histogram is closest to dead center.
I just noted you stated "...Results are certainly superior to prints a lab would have given me had I printed the roll back in 2004."
I have to strongly disagree. Whether done by a camera or by a scanner, digitizing unavoidably loses detail, period. The best drum scans are far better than any light box capture, but the best prints will always come printing from the original film.
 
  • Like
Reactions: OldMacs4Me

OldMacs4Me

macrumors 68020
Original poster
May 4, 2018
2,323
29,933
Wild Rose And Wind Belt
First of all I said 'a lab' not a top notch custom lab. Very few photographers used top end labs for anything but special prints. Most labs in the early 2000s did not produce great or even good results. When I ran my own lab (in the 1990s) I lost track of how many strips of film from other labs I loaded onto spindles and ran by hand through the bleach and fix to remove residual silver. Most labs failed to carefully monitor the SG of their C-41 developer. Typically it was much too strong, I know with the Agfa processor it typically took at least quart of water a day to compensate for evaporation. Fail to do that and the Bleach was rapidly diluted resulting in some of the exposed silver being retained in the film.

I am very fortunate in that I have 8x12 images that I printed myself from many of the negs I later scanned. At 12x18 or smaller it would take a very critical eye to notice any losses comparing my digitally copied image to an original. There are always minor differences, sometimes for the better, sometimes just different and occasionally worse. In all cases the differences are not something I would lose sleep over. Moreover working digitally I am better able to control contrast and shadow detail than I was in the lab.

I should clarify that at my own lab I hand processed film with a dip and dunk set-up. Working in other labs I used processors. And yes loading strips of 4 or 5 onto spindles was a royal pain in the wazoo and I charged accordingly. Usually it was only one strip. but once there were several entire rolls shot at a wedding, then developed at K-Mart.
 
Last edited:

Allen_Wentz

macrumors 68040
Dec 3, 2016
3,329
3,762
USA
I must agree, the basic low end labs put out very low quality prints. And the Nikon scanners that I was using circa 2008 did a very good job of digitizing; good enough for 4-color glossy doubletruck ads or for 13x19 Epson inkjet prints.

My efforts at camera digitizing with a Nikon D3 and 105mm lens never came close to the quality that you achieve, but they were good enough for small ads and anything online. Mostly I camera-digitized solely for image databasing purposes; copied film was then archived for later [s l o w] scanning when needed for high-rez usage.
 

OldMacs4Me

macrumors 68020
Original poster
May 4, 2018
2,323
29,933
Wild Rose And Wind Belt
So I notice the next generation of Z50 is on its way.

Improvements that might entice some buyers:
JPEG continuous new 30fps, old 11fps
New back is fully articulated, old was single axis articulation
Buffer is considerably larger
Low light AF sensitivity noticeably improved.
USBc Old was USBb
Same viewfinder but brighter setting available
Touch screen buttons now physical

As to back sliding:
Weight has gone from 450gms to 550gms
Battery life reduced by about 20%. A bit surprising as the new version uses a larger capacity battery.
Price is up about 7-8%

If the latter considerations outweigh the former, it might be a good time to purchase the original Z50 while they are still in stock or as they become available used.

I can find no indication that Nikon addressed what is perhaps my biggest beef and probably still lacks levels for shooting vertically instead of horizontally. I do sometimes photograph artwork on a flat surface. Hand held is best as any tower-swing arm support is likely to be cumbersome, the bigger the subject the more cumbersome the arm. The Z50 would be perfect were it not for the lack of levels. However my smaller cameras force me to look over the top and down instead of being able to use a more comfortable articulated back.

Fairly complete summary here:
 
Last edited:
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.