Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Janichsan

macrumors 68040
Oct 23, 2006
3,126
11,925
IXpCIgj.jpg
 

r.harris1

macrumors 68020
Feb 20, 2012
2,210
12,757
Denver, Colorado, USA
P0001198 1.jpg
As promised, here's a different crop from my lens tilt practice image from yesterday, with my goal of getting acceptably sharp front-to-back using a wider aperture (f8 in this case) on a 40mm lens. I need a lot more practice but it's still a lot of fun. There are apps you can get where you can get the precise tilt you need (e.g. Lumariver) but there's the "fiddle" option too, which I used :). I'd have normally shot this around f16 with no tilt and would have dealt with any diffraction as best I could.
 

BasilFawlty

macrumors 65816
Jun 20, 2009
1,082
3,036
New Mexico
Not a great picture, but an unscheduled DIY - and took the picture as a shopping reference. Discovered slight stream of water on garage and identified source was cold water intake of hot water heater with sticker showing install date of 7/2004. Still works, so definitely got my money worth out of it, and even if replaced would still have the current problem to resolve. The problem is that the connectors, one of which split causing the leak, are no longer made, so have to "modernize" the connection. Thought I had it with two 3/4" female threaded to PEX connector, one of which fit fine at the hot water heater, but the pipe elbow connection needs a 1" to 3/4" reducer. They do make it, but note stocked by anyone, including local dedicated plumbing supply warehouse and Amazon overnight, with order delivery next week for each source. Too long to wait, so back to the drawing board today.

On a side note, I have no idea why they design, even today, the electrical connection without waterproof sealing since top leaks are not that uncommon. It was filled with water that I sucked out with a shop-vac and cleaned the connections.

View attachment 1874547
Been there done that! I feel your pain. This past winter we had one of those once in 100 year freezes where the temperature got down to minus 9. As a result, the pipes in the garage burst in several places. Luckily I know how to sweat copper, but it was still a real pain. I basically had to replace every piece of pipe in the garage.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.