Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
https://www.amazon.com/gp/product/B08FHSCGPJ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Finally found a flip case thats thin enough to carry! I'm just used to the samsung S view case and like the screen
protection and handling of the phone in general. I tried Sheldon, platinum from best buy, Touuch and now Aunote. Surprising good quality for 12 bucks
Screen Shot 2020-11-15 at 1.08.06 PM.png
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Does anyone have a real-life photo of Kumquat silicone case on Pacific Blue Pro? Usually use a fabric sleeve but would like a silicone one for days out, can’t decide between deep navy/plum/kumquat/Product Red!
It depends what you like:
- elegant/discreet/understatement: go for plum or deep navy.
- fashionista/young-and-poppy-bold statement: go for kumquat.
- modern and socially responsible: go for product red.

(of course, this is second-degree humor! pick whichever ones you like best) ;)
 
Last edited:
Finally got to pop in my Pro Max in the Torras Slim Fit case but unfortunately it does not fit. The top part fits fine but the bottom portion of the phone pushes itself out of the case and the screen eventually peaks out over the lip of the case. Sucks because I’ve used these cases on my last two iPhones since they’re slim but still protective. Maybe the one I got was just defective?

Similar issue here. It's as if the flat back of the case isn't quite wide enough, and the sides do't quite wrap properly at right angles to the back, causing a gap along the edges on both sides where the buttons are. I just know that dust and grit will get in there and make a mess of the edges of the phone. As soon as my Apple Silicone case arrives next week, the Torras is going back to Amazon.
 
This is the conundrum I’m facing: love this pacific blue, but I’m finding clear plastic kinda cheapens the whole vibe. Maybe gonna switch gears and do leather again 🤷‍♂️
I have the exact same inner struggle...I love the Pacific Blue, but hate the way clear cases look in general.
 
After reading the thread on corners popping out with apple leather case, I canceled the order and went with Peel clear hard case. I’d like my pacific blue pro Max showing through with a clear case. I’ve tried apple clear case but it’s too slippery and buttons were difficult to press.

anyone else had experience with Peel clear case (hard)?
 
I'm taking the Apple clear MagSafe case back - the bottom left corner of my Mini seems to want to pop out of the case all the time.

My silicon case is fine but I do need to be sure to push the phone in properly when I put it on for the first time. Not sure if its the flat edges, but it seems really easy to not put the whole phone in and have a random corner sticking up.
 
I'm taking the Apple clear MagSafe case back - the bottom left corner of my Mini seems to want to pop out of the case all the time.

My silicon case is fine but I do need to be sure to push the phone in properly when I put it on for the first time. Not sure if its the flat edges, but it seems really easy to not put the whole phone in and have a random corner sticking up.
My wife has the OB Symmetry FWIW, no issues
 
When I first ordered the iPhone 12 Pro I got it with the black silicone case, however I have now purchased a Baltic Blue leather case. I changed to the leather case after getting the Product Red leather case for my wife (she found the clear case a bit slippery and the volume buttons more difficult to press, so I wanted to get her another case). The quality is just so good, would highly recommend the leather cases.
 
Picked up an Otterbox Aneu from the Apple Store yesterday.

Pros: Nice grip, good tight fit around phone, significant lip protection, no fingerprinting, MagSafe, thin, seems like it would cope well in a drop, asymmetric cutouts

Cons: a bit of sag near charging port, expensive, power button not very tactile.

Overall I like it. For those with OCD re sag near charging port I suggest you stay away.

ATM I have 4 cases. My rank from favourite to least favourite:

1. Otterbox Aneu
2. Mous Limitless
3. Raptic Defense Lux Carbon
4. Official leather case
 
What’s the best super slim cases with good fitment ? Peel and totallee ? Anything else ? Pics ?
I'd like some recommendations for this also. I got the Totalee case but returned it. Was OK but not worth £29. I was under the impression you could see the Apple logo but no, it was completely black. Fit was Ok but as I say, not worth £29.
 
Picked up an Otterbox Aneu from the Apple Store yesterday.

Pros: Nice grip, good tight fit around phone, significant lip protection, no fingerprinting, MagSafe, thin, seems like it would cope well in a drop, asymmetric cutouts

Cons: a bit of sag near charging port, expensive, power button not very tactile.

Overall I like it. For those with OCD re sag near charging port I suggest you stay away.

ATM I have 4 cases. My rank from favourite to least favourite:

1. Otterbox Aneu
2. Mous Limitless
3. Raptic Defense Lux Carbon
4. Official leather case

Since you’ve got the Mous Limitless, others have said the buttons are still hard to press. What do you think? Are they hard to press? Anything you don’t like about the case? I keep thinking about ordering one, but I’m hesitant.
 
Since you’ve got the Mous Limitless, others have said the buttons are still hard to press. What do you think? Are they hard to press? Anything you don’t like about the case? I keep thinking about ordering one, but I’m hesitant.

I don’t have any issue with the buttons. Both the volume and power buttons are tactile enough on my iPhone 12 to the point where I haven’t ever given 2 thoughts about it.

IMO the things that you should think about are:
- case is a bit saggy around volume buttons
- “banana boat”
- grip on the sides is bad if you have dry hands
- speaker cutouts are not assymetrical
- price
- it’s bulky

Personally I can live with the above “issues” hence why I like it.
 
  • Like
Reactions: KentuckyHouse
I don’t have any issue with the buttons. Both the volume and power buttons are tactile enough on my iPhone 12 to the point where I haven’t ever given 2 thoughts about it.

IMO the things that you should think about are:
- case is a bit saggy around volume buttons
- “banana boat”
- grip on the sides is bad if you have dry hands
- speaker cutouts are not assymetrical
- price
- it’s bulky

Personally I can live with the above “issues” hence why I like it.

Btw I have the leather version of the Mous limitless
 
  • Like
Reactions: KentuckyHouse
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.